Glock Performance Trigger Gen5 Handleiding

Glock Niet gecategoriseerd Performance Trigger Gen5

Lees hieronder de 📖 handleiding in het Nederlandse voor Glock Performance Trigger Gen5 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 127 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
www.glock.com
1
EN
GLOCK Accompanying Sheet
Performance Trigger
TRIGGER ASSEMBLY DISASSEMBLED
WARNING!
Make sure that your GLOCK pistol is unloaded (magazine removed and chamber empty) before installing/removing
the GLOCK Performance Trigger. Complete the disassembly procedure according to the GLOCK Armorer‘s Manual
until the step “Trigger Mechanism Housing Pin Removal/Installation” (see Chapter XI.).
Trigger with Trigger Bar
Trigger Spring with Sear-holder
Trigger Mechanism Housing Ejector
Sear-holder pin
Connector
Remove the ejector by sliding it out of the trigger mechanism housing with
a screwdriver. (# 2)
TRIGGER ASSEMBLY DISASSEMBLY
Rotate the trigger bar out of the trigger mechanism housing by twisting it
slightly counter clockwise. (# 1)
# 1 #
# 4 #
# 5 #
# 2 #
Remove the sear-holder pin by pushing it out of the trigger mechanism
housing by using a 1.5 pin punch or a paperclip. The trigger spring should
fall out easily. (# 3)
Remove the connector by pushing the GLOCK tool all the way through the
hole provided on the opposite side of the trigger mechanism housing. (# 4)
# 3 #
Performance Trigger Assembly Removal
Twist the trigger spring assembly to align with the slot allowing the spring
and rod to be removed. Then separate the trigger spring from the trigger
spring rod. (# 5)
2
Trigger spring assembly disassembled. (# 6)
Note: Do not disassemble the sear holder any further.
Insert the sear holder pin and ensure that it is flush with the trigger mechanism
housing. (# 9)
Slide the trigger spring back on the trigger spring rod. Align the trigger spring
rod with the slot on the sear-holder and twist the trigger spring assembly to
lock it in place. (# 7)
Align the holes of the sear-holder with the trigger mechanism housing and
hold it in place. (# 8)
# 6 #
# 7 #
# 8 #
# 9 #
# 10 #
Performance Trigger Assembly Replacement
Insert the connector into its recess in the trigger mechanism housing. Press
the connector in by using your GLOCK tool as shown. (# 10)
Sear holder
Trigger spring
Rod
3


Product specificaties

Merk: Glock
Categorie: Niet gecategoriseerd
Model: Performance Trigger Gen5

Heb je hulp nodig?

Als je hulp nodig hebt met Glock Performance Trigger Gen5 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Glock

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo

Festo VPPI Handleiding

21 November 2024
Festo

Festo SFAB Handleiding

21 November 2024
Festo

Festo SFAH Handleiding

21 November 2024
Festo

Festo DRRD-12 Handleiding

21 November 2024
Festo

Festo SDE3 Handleiding

21 November 2024
Festo

Festo SFTE Handleiding

21 November 2024
Festo

Festo CRVZS-5 Handleiding

21 November 2024