Giga Copper G4201TM Handleiding

Giga Copper Niet gecategoriseerd G4201TM

Lees hieronder de 📖 handleiding in het Nederlandse voor Giga Copper G4201TM (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

G4201TM

G.hn Master and Client

Quick start guide

For further informaon and purchase enquiries

please contact info@gigacopper.net

1. Introducon

With the G.hn modem G4201TM you can easily extend

your network via exisng data and telephone cables.

The devices are also suitable for the distribuon of ber

opc connecons from the ONT to the router via exisng

telephone line.

The modem can use any type of cable - both twisted pair

and non-twisted pair - for data transmission and

achieves a speed of approx. 1500 Mbit/s (sum of both

transmission direcons).

The devices are always connected in pairs - a master and

a client. The master determines how fast the data is

transferred towards the client and back

(download/upload).

In networks with several clients, a G.hn switch can be

used instead of several master modems (see

Installaon). This enables the central administraon of

all G.hn components.

2. Package content

 G420 M Master or G4201TM Client 1T

 DC-12V/1A Power adapter

 RJ11/RJ11 telephone cable , 4- wire (SISO and MIMO) 1.5m

 TAE-F/RJ11 , 4- pole (SISO and MIMO) plug

3. Technical data

 Dimensions: 111.5 * 83 * 24.5 mm

 Weight: 0,19 kg

 Operang temperature: 0°C - 40°C

 Power consumpon: < 3 Wa

4. G.hn Specicaon

 G.hn Wave2, 2-200 MHz

 Connecon type: SISO (1 wire pair, 2-200MHz) and

MIMO (2 wire pairs, 2- MHz) 100

 Total bandwidth ca. 1500 Mbit/s –

(Total Download and Upload)

 Spling of the bandwidth variable default: –,

70% Download (from master client) to

30% Upload (from client master) to

 Maximum permissible aenuaon of the cable

connecon: 75dB

5. Interfaces

Panel and LED descripon

Labelling

Descripon

12V DC

Power input

RST

Recessed reset buon (15 Sec .)

LINE

G.hn port

Gigabit Ethernet Port

PWR LED

Displays power availability

LINE LED

Status of the G.hn connecon

(Green - OK, Yellow - weak signal,

O - no connecon)

GE LED

Ethernet Connecon Status

6. Installaon

Variant 1 Point- -Point one master and client – „ to “:

Variant 2 Connecon to the Switch G4224T or G4200- –8T/4T

7. Connecon type and wire assignment on device (RJ11 plug)

The G.hn connecon can be established either via one wire pair (connecon type SISO PHONE ) or = G.hn prole “ 200MHz”

via two wire pairs (connecon type MIMO PHONE 100MHz MIMO ). The connecon type must be = G.hn prole “ ”

congured via web interface in both modems or via the G.hn switch.

The default seng PHONE is one wire pair connecon (“ 200MHz”).

Wire assignment SISO

Variant 1 oint- -Point – „P to “

Wire assignment SISO

Variant 2 Connecon to Switch –

Wire assignment MIMO

Variant 1 Point- -Point – „ to “

Wire assignment MIMO

Variant 2 Connecon to Switch –

8. Installaon notes

 The wires of a pair can be connected straight or crossed.

 Maximum range of the G.hn connecon depends on the type of cable used, the connecon type and the environment.

Typical values for a 0.5 mm twisted pair cable: connecon possible up to approx. 600/800 metres (SISO/MIMO),

maximum bandwidth of 1500 Mbit/s - up to approx. 100/200 metres (SISO/MIMO).

 For longer cables ( approx. 100-150m), the bandwidth can be increased by up to 15% (SISO) resp. up to 25% (MIMO) up

by adjusng the signal level. For this purpose, the "Range opmizaon model" must be set to "Long" in the web

interface of both devices resp. the "LongRangeMode" seng must be acvated in the G.hn switch.

 The negoated bandwidth can be queried via the web interface of the devices (see point 11).

 The bandwidth split of the G.hn connecon is variable. It can be set between 80/20% and 20/80%. In the factory seng,

70% of the bandwidth is reserved for download (direcon master to client) and 30% for upload (direcon client to

master). The allocaon can be congured via master web interface (menu G.hn DownStream / UpStream Rao) resp. via

the G.hn switch.



9. Administraon

10. IP address

The devices do not require IP addresses from the local network segment during operaon, because they transmit the data

trac via the MAC addresses. In the factory seng, they do not obtain any addresses from the local DHCP server.

If desired, stac IP addresses can be congured or the DHCP client can be acvated ("IP" menu in the web interface).

11. Query of the negoated bandwidth

The negoated bandwidths for both direcons can be queried via web interface of each modem. The values shown are

gross data transmission rates on physical layer (PHY). The transmission rate on applicaon layer is approx. -20% lower.15

IP-Adress: 192.168.10.252 (Master), 192.168.10.253 (Client). Login passwort: paterna Factory reset passwort: betera ,

 Connect your computer to the G.hn modem via the GE

port..

 Assign a xed IP address to your computer, e.g.

192.168.10.100 (network mask 255.255.255.0).

 Open a web browser and connect to 192.168.10.252 or

192.168.10.253

 Login with the standard password: paterna

It is possible to transmit an analogue telephone line on the same

line parallel to the G.hn signal. Use a DSL splinter for this purpose.

Product specificaties

Merk:	Giga Copper
Categorie:	Niet gecategoriseerd
Model:	G4201TM

Heb je hulp nodig?

Als je hulp nodig hebt met Giga Copper G4201TM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Giga Copper

Giga Copper G4201TM Handleiding

20 Februari 2024

Giga Copper G4202T Handleiding

20 Februari 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Vitec MGW Diamond-HX OG Handleiding

23 November 2024

Electrolux STA9 Handleiding

23 November 2024

Electrolux UMP3 Handleiding

23 November 2024

Electrolux ZS70GL Handleiding

23 November 2024

Bosch HEZ8TK36UC Handleiding

23 November 2024

Bosch HEZ8ZZ36UC Handleiding

23 November 2024

Bosch HDZIT301 Handleiding

23 November 2024

Bosch HEZBS301 Handleiding

23 November 2024

LG LX-330 Handleiding

23 November 2024

Stamos S-PLASMA 60U Handleiding

23 November 2024