GFM GM726C Handleiding

GFM Niet gecategoriseerd GM726C

Lees hieronder de 📖 handleiding in het Nederlandse voor GFM GM726C (65 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/65
User Manual
GM726C
7MP Digital Camera
i
Precautions
y Before using the camera, please ensure that you read and understand the safety
precautions described below. Always ensure that the camera is operated correctly.
y Do not aim the camera directly into the sun or other intense light sources which
could damage your eyesight.
y Do not try to open the case of the camera or attempt to modify this camera in any
way. High-voltage internal components create the risk of electric shock when
exposed. Maintenance and repairs should be carried out only by authorized service
providers.
y Do not fire the flash too close to the eyes of animals or people, especially for young
children. Eye damage may result. In particular, remain at least one meter away from
infants when using flash.
y Keep the camera away from water and other liquids. Do not use the camera with
wet hands. Never use the camera in the rain or snow. Moisture creates the danger
of electric shock.
y Keep the camera and its accessories out of the reach of children and animals to
prevent accidents or damage to the camera.
y If you notice smoke or a strange odor coming from the camera, turn the power off
immediately. Take the camera to the nearest authorized service center for repair.
Never attempt to repair the camera on your own.
y Use only the recommended power accessories. Use of power sources not
expressly recommended for this equipment may lead to overheating, distortion of
the equipment, fire, electrical shock or other hazards.
îš„ FCC Compliance and Advisory
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.) this device may not cause harmful interference, and 2.) this device must accept any interference
received, including interference that may cause unsatisfactory operation.
This equipment has been tested and found to comply with the limits for a Class B peripheral, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communication. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
y Reorient or relocate the receiving antenna.
y Increase the separation between the equipment and receiver.
y Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
y Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment. When shielded interface cables have been provided with
the product or when specified additional components or accessories have elsewhere been designated to
be used with the installation of the product, they must be used in order to ensure compliance with FCC
regulations
.
ii
Contents
PRECAUTIONS I
CONTENTS II
GETTING STARTED 1
USING T MHIS ENU 1
UNPACKING 2
PARTS OF THE CAMERA 3
I BNSERTING THE ATTERIES 5
L B IOW ATTERY NDICATOR 5
A BBOUT ATTERY TYPE 5
I M CNSERTING THE EMORY ARD 6
A C MBOUT AMERA EMORY 6
DCF PROTOCOL 6
S DETTING THE ISPLAY LANGUAGE / D ATE
& T IME 7
S DETTING THE ISPLAY LANGUAGE 7
S D &ETTING THE ATE TIME 7
USING THE LCD MONITOR 9
REC MODE 9
PLAYBACK MODE 10
CHANGING THE LCD STATUS 11
BASIC OPERATION 12
T P O OURNING THE OWER N AND FF 12
P S FOWER AVING UNCTION 12
CHANGING THE MODE 13
SWITCHING BETWEEN REC MODE AND
PLAYBACK MODE 13
SELECTING THE REC MODE 13
SELECTING THE ASM MODE 14
U MSING THE ENUS 15
REC MENU 15
SETUP MENU 17
BASIC RECORDING 20
R S IECORDING TILL MAGES 20
U QSING THE MODE 21
S IETTING MAGE UALITYSIZE AND Q 22
U Z FSING THE OOM UNCTION 23
U FSING THE LASH 24
U MSING THE ACRO 25
U S - & BSING THE ELF TIMER URST 26
U A PSING THE PERTURE RIORITY 27
U S PSING THE HUTTER RIORITY 27
U M ESING THE ANUAL XPOSURE 28
R M CECORDING OVIE LIPS 29
S M SETTING THE OVIE IZE 29
R AECORDING UDIO CLIPS 30
PLAYING ACK UDIO LIPSB A C 30
R V MECORDING A OICE EMO 31
PLAYING OICE EMOBACK A V M 31
OTHER RECORDING FUNCTIONS 32
S METTING THE ETERING 32
S W BETTING THE HITE ALANCE 32
SETTING THE ISO 33
S EETTING THE XPOSURE 33
SETTING THE AEB 33
S HETTING THE IGHLIGHT 34
S SETTING THE HARPNESS 34
S P EETTING THE HOTO FFECT 34
S DETTING ATE STAMP 35
S SETTING TA BILIZER 35
S FETTING ACE TRACKING 35
S PETTING HOTO FRAME 35
PLAYBACK 36
PLAYING BACK IMAGES 36
PLAYING ACK OVIE LIPSB M C 36
M & T SAGNIFYING RIMMING TILL IMAGES
37
V TIEWING IN HUMBNAIL 38

Product specificaties

Merk: GFM
Categorie: Niet gecategoriseerd
Model: GM726C

Heb je hulp nodig?

Als je hulp nodig hebt met GFM GM726C stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd GFM

GFM

GFM TDC35 Handleiding

18 November 2024
GFM

GFM GT-10.0Z3 SL Handleiding

14 Juli 2023
GFM

GFM TDC36 Handleiding

14 Juli 2023
GFM

GFM JDC28W Handleiding

14 Juli 2023
GFM

GFM CDC500C3GF Handleiding

14 Juli 2023
GFM

GFM TDC531K Handleiding

14 Juli 2023
GFM

GFM DV150 Handleiding

14 Juli 2023
GFM

GFM GM726C Handleiding

14 Juli 2023
GFM

GFM TDC-5502C Handleiding

14 Juli 2023
GFM

GFM TDC32 Handleiding

14 Juli 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Kenmore

Kenmore KKSK12Grey Handleiding

18 November 2024
Kenmore

Kenmore KKTOAF25SS Handleiding

18 November 2024
Exibel

Exibel ZH1708143 Handleiding

18 November 2024
Kenmore

Kenmore KKAF8Q Handleiding

18 November 2024
PCE Instruments

PCE Instruments PCE-EMD 10 Handleiding

18 November 2024
PCE Instruments

PCE Instruments PCE-MPC 20 Handleiding

18 November 2024
PCE Instruments

PCE Instruments PCE-EMD 5 Handleiding

18 November 2024
Joy-it

Joy-it RB-AlucaseP4 + 01 Handleiding

18 November 2024
Growatt

Growatt ATS-T Handleiding

18 November 2024
Growatt

Growatt MAX 70KTL3 Handleiding

18 November 2024