GeoVision GV-POEX0100 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor GeoVision GV-POEX0100 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
September 10, 2021
1
GV-POEX0100 One-Port PoE Extender
Requirements and Limitations
The maximum distance allowed between a PoE switch and a GV-IP Camera depends on the
PoE switch type, PoE power output of the connected device (PD) and the type of power
supply. These can be summarized as below.
GV-IP Camera Powered by PoE
GeoVision
Brand & Model
PD of GV-IP Camera
GV-POE0801 / 0811
GV-POE0812
GV-POE1601 / 1611
GV-POE2401 / 2411
GV-POE0400
GV-POE0410-E
GV-POE0800
GV-POE0810
Third-Party PoE
Switches
(IEEE 802.3at)
PD < 6.49 W
(IEEE 802.3af) 600 m (1968.5 ft) 400 m (1312.34 ft) 400 m (1312.34 ft)
PD 6.5 W ~ 12.95 W
(IEEE 802.3af) 400 m (1312.34 ft) 200 m (656.17 ft) 200 m (656.17 ft)
PD 13 W ~ 25.5 W
(IEEE 802.3at) 200 m (656.17 ft) - -
PD > 25.5 W - - -
Note:
1. Each GV-POEX0100 extends another 100 m (328.08 ft) between the PoE switch and
the GV-IP Camera. Therefore, a distance of 200 m (656.17 ft) requires one GV-
POEX0100 and 400 m (1312.34 ft) requires three etc.
2. GV-POEX0100 can only be connected using CAT-5e cables, TIA/EIA-568-B, with the
maximum DC resistance of 9.38 ohms/100 m.
September 10, 2021
2
GV-IP Camera Powered by Power Adapters
GeoVision
Brand & Model
GV-POE0801 / 0811
GV-POE0812
GV-POE1601 / 1611
GV-POE2401 / 2411
GV-POE0400
GV-POE0410-E
GV-POE0800
GV-POE0810
Third-Party PoE
Switches
(IEEE 802.3at)
GV-IP Cameras 600 m (1968.5 ft) 400 m (1312.34 ft) 400 m (1312.34 ft)
Compatibility
1. GV-POEX0100 is only compatible with third-party switches that comply to PoE+ (IEEE
802.3at) and is not compatible with GV-PA191/481/482/901.
2. GV-POEX0100 supports all GV-IP Camera when installed with a power adapter and
does not support the following models when powered by PoE:
ï‚· GV-BX2510-E / 5310-E
ï‚· GV-FE3403 / 5303
ï‚· GV-VD2540-E / 5340-E
ï‚· GV-SD220 / 220-S
3. GV-POEX0100 is only compatible with the following GeoVision PoE switches of the
indicated firmware versions:
ï‚· GV-POE0801 / 1601 / 2401 (V1.03 or later)
ï‚· GV-POE0811 / 1611 / 2411 (V1.01 or later)
Packing List
1. GV-POEX0100
2. Screw x 2
3. Screw anchor x 2
4. GV-POEX0100 Installation Guide
September 10, 2021
3
Overview
1
2
3
No. Name Description
1. PSE Port Connect to the Power Sourcing Equipment (PSE) or the PoE
switch side.
2. PD Port Connect to the Powered Device (PD) or the GV-IP Camera side.
3. DIP Switch Switch it to ON to enable the PoE function; switch it to OFF to
transmit data without supplying the power.
LED indicator:
LED Color/Status Description
Amber On PoE function enabled
PoE
Off PoE function disabled or no connection
Green On Ports connected
Green Blinking Data being transmitted and/or received Data
Green Off No connection


Product specificaties

Merk: GeoVision
Categorie: Niet gecategoriseerd
Model: GV-POEX0100

Heb je hulp nodig?

Als je hulp nodig hebt met GeoVision GV-POEX0100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd GeoVision

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd