Genesis Seaborg 400 Handleiding

Genesis Controller Seaborg 400

Lees hieronder de 📖 handleiding in het Nederlandse voor Genesis Seaborg 400 (2 pagina's) in de categorie Controller. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Component Checklist

Step 1. Component Checklist

Check you have received all parts against the Component Checklist above.

Hardware

Mounting Fasteners

Step 2. Remove the Wall Bracket Cover



[B] Nylon

Anchor (x2)

[C] M4 Washer (x4)

[D] M5 Washer (x4)

[A] Wall Mount

Screw (x2)

[J] M6x8mm / [K] M6x12mm (x4 each)

[F] M4x8mm / [G] M4x12mm (x4 each)

[H] M5x8mm / [I] M5x12mm (x4 each)

[E] M6 Washer (x4)

TOOLS REQUIRED:



ps Head Screw Driver

3/16”) Drill Bit

5/16”) Masonry Drill Bit

Remove the two Locking Screws,

on both left and right sides.

Step 3. Remove the Mounting Plate

Step 4. Fix the Wall Bracket to the Wall

Using the Wall Plate as a drilling template, choose from one of the following Mounting options, 7LPEHU6WXG250DVRQU\:DOO.

'ULOOWZRKROHVPP

GHHSZLWKDPP

GULOOELW

Masonry Wall

Nylon Anchor

(x2)

Wall Mount Screw (x2)

Wall Plate

M6 Washer (x2)

Wall Plate

Wall Mount Screw (x2)

M6 Washer (x2)

Timber Stud

'ULOOWZRKROHVPP

GHHSZLWKDPP

0DVRQU\GULOOELW

LIFT

TH-2250-VTP

(fully assembled)

IMPORTANT INFORMATION

,03257$17,QVWDOO:DOO0RXQWDVSHU,QVWDOODWLRQ,QVWUXFWLRQV

! Wall Mount supports Displays weighing up to 30kg (66lbs), with VESA hole configurations:

50x50mm, 75x75mm, 100x100mm, 200x100mm, 200x200mm.

! The Manufacturer accepts no responsibility for incorrect installation.

Cover

Locking

Screw (x2)

PULL

TH-2250-VTP Flat Screen Wall Mount lTilt

Installation Instructions

Step 6. Fasten the Mounting Plate to your Display

Mounting Screw (x4)

Choose appropriate Mounting Screws

and Washers from the Hardware

supplied to suit your Display.

Washer (x4)

Top of

Display

Mounting Plate

Step 7. Attach the Display to the Wall

Step 8. Tilt Adjustment

Locking

Screw (x2)

Hook the Mounting Plate

onto the Wall Bracket.

Wall Bracket

Mounting Plate

Re-insert the two

Locking Screws

on boths sides.

Display

( required)

Tighten the Lever to lock the

Display in the desired position.

Step 5. Reinstall Wall Bracket Cover

Push the two pieces of

the Cover together.

PUSH

TILT

Installation Complete

No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.

Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 1 7.01.11 ©

LOOSEN

Loosen the Lever before adjusting tilt.

TIGHTEN

Lever

LOWER

Product specificaties

Merk:	Genesis
Categorie:	Controller
Model:	Seaborg 400
Kleur van het product:	Zwart, zilver
Gewicht:	2290 g
Breedte:	290 mm
Diepte:	350 mm
Hoogte:	110 mm
Snoerlengte:	2 m
Stroombron:	Kabel
Connectiviteitstechnologie:	Bedraad
Ondersteunt Windows:	Windows 10, Windows 7, Windows 8, Windows Vista, Windows XP
Soort apparaat:	Stuurwiel + pedalen
Aantal knoppen:	15
Aansluiting:	USB
Gaming platforms ondersteund:	Nintendo Switch, PC, PlayStation 4, Playstation 3, Xbox 360, Xbox One
Programmeerbare knoppen:	Ja
Reflex vibratie:	Ja
Gaming controle functie toetsen:	D-pad
Stuur-rotatiehoek:	900 °
Inclusief klemmen:	Ja