Geemarc Wake'n'Shake Light Handleiding

Geemarc Wekkerradio Wake'n'Shake Light

Lees hieronder de 📖 handleiding in het Nederlandse voor Geemarc Wake'n'Shake Light (2 pagina's) in de categorie Wekkerradio. Deze handleiding was nuttig voor 74 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

1 2 3

USER GUIDE

!!! Please refer to our website: www.geemarc.com for an up to date user

guide, as there may be important updates and changes you need to be

aware of !!!

What’s in the box

● Wake & Shake Light Power supply unit This instructions guide 1 Shaker● ● ●

Signs and symbols

The following symbols appear in the instructions for use and on the battery door.

WARNING : Warning instruction indicating a risk of injury or damage to

health.

IMPORTANT Safety note indicating possible damage to the device/ :

accessory.

NOTE Note on important information. :

1. Safety notes

WARNING

 Only operate the device with the power supply unit provided and the mains voltage

specied on the power supply unit.

 Do not operate the device if it is visibly dam aged.

 In the event of defects or operational faults, switch the device o immediately and

disconnect it from the mains socket.

 Do not pull on the mains cable or on the device to disconnect the power supply unit

from the socket.

 Never plug in or unplug the power supply unit when you have wet hands.

 Never hold or carry the device by the mains cable.

 Keep packaging material away from children (risk of suocation).

 Arrange the mains cable so that no-one will trip over it.

 Never use the device in proximity to moisture.

2. Intended use

The Wake-up Light wakes you from sleep in a gentle and natural manner. The LED

light gradually becomes brighter like a rising sun, allowing your eyes to slowly become

accustomed to the light conditions and your body to gently prepare itself for waking up.

The light intensity can be set to your personal preferences. Along with the simulated

sunrise, you can set an acoustic alarm to help you wake up. Choose between the

radio, a beep or five natural sounds or you can select shaker vibration. The Wake-up

Light provides a rested and pleasant start to your day.

3. Device functions:

 Clock display

 Wake-up function with simulated

sunrises and alarm

 Two alarms selection

 Radio

 Goodnight function

 5 natural sounds

 Shaker vibrations

 LED light can be used as a lamp

 Mood light function.

 USB Smart Phone charger.

 MP3 Input.

WARNING

 The device is only intended for the purpose described in these instructions for use.

The manufacturer is not liable for damage resulting from improper or careless use.

4. Initial use

 Remove the packaging material.

 Check that all parts listed are present.

 Check the device, mains plug and cable for damage. Place the device on a rm,

even surface.

 Remove the battery compartment cover (A11) on the rear of the device and insert

the 4 x AA batteries with corrected polarity battery symbol on compartment. The

battery supplies power to the device in the event of a power failure and is not

intended to be used as a permanent power supply.

 Plug the power supply connector into the power supply socket on the underside of

the device.

 Insert the mains plug into a suitable socket. The time will display and you can set

the hour format.

NOTE: All settings will back to normal time mode after 6 seconds, press the go

TONE button to exit if you want to exit the settings.

5. Cleaning and maintenance

 Clean the device with a dry cloth.

 Do not use any abrasive cleaning products.

 Protect the device from knocks, damp, dust, chemicals, drastic changes in

temperature, and nearby sources of heat (ovens, heaters).

6. Technical Data

 :120 x 170 x 120mm Dimensions

 : approx. g Weight 508

 Voltage supply: -240V; 50/60Hz; 7A 100 0.

 Protection class II

 For indoor use only

 7.5-108.0 MHz FM Radiofrequency range: 8

 : 300lux Illuminance

7. RANTEE GUA

From the moment your Geemarc product is purchased, Geemarc guarantees it for the

period of two years. During this time, all repairs or replacements (at our discretion) are

free of charge. Should you experience a problem then contact our help line or visit our

website at www.geemarc.com.

The guarantee does not cover accidents, negligence or breakages to any parts. The

product must not be tampered with or taken apart by anyone who is not an authorised

Geemarc representative.

The Geemarc guarantee in no way limits your legal rights.

IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE AND MUST BE

RETAINED AND PRODUCED IN THE EVENT OF A WARRANTY CLAIM.

Please note: The guarantee applies to the United Kingdom only.

8. DECLARATIONS:

CE Directives

Geemarc Telecom SA hereby declares that this product is in compliance with the

essential requirements and other relevant provisions of the RED 2014/53/UE.

The CE declaration of conformity may be consulted at www.geemarc.com

Recycling Directives

The WEEE (Waste Electrical and Electronic Equipment) has been put in place for the

products at the end of their useful life recycled in the best way. to be

When this product is nished with, please do not put it in your domestic waste bin.

Please use one of the following disposal options:

- Remove the batteries and deposit them in an appropriate WEEE skip.

Deposit the product in an appropriate WEEE skip.

- Or, hand the old product to the retailer. If you purchase a new one, they should

accept it.

Thus if you respect these instructions you ensure human health and environmental

protection.

For product support and help visit our website at www.geemarc.com

United Kingdom: 5B Swallow Court, Swallowfields, Welwyn Garden City,

Hertfordshire, AL7 1SB, UK

telephone or fax 01707 387602 01707 832529

QUGWake&ShakeLight_En_A3_V 9 1.

4 5 6

9. Unit description

FRONT RIGHT

A1. LED light

A2. SET/MEM button (for adjusting time and radio station storage)

A3. ALARM button (for adjusting the alarm time n alarm type)

A4. RADIO button (for activating the radio function)

A5. SNOOZE button (for activating snooze function, goodnight function or Wake up light function)

LEFT REAR

A6. TONE button (for adjusting the volume and selecting alarm tone)

A7. LIGHT button (for switching on/o the light and adjusting the back light and colour mood light

selecting)

A8. UP/Down button (For adjusting time, alarm and volume)

A9. Aux Input Jack (For connecting the MP3 input)

A10. USB port (for charging a smart phone)

A11. Battery compartment with cover

A12. Shaker Jack (for connecting the shaker)

A13. Reset-Hole (Resetting the device to factory settings)

A14. Switching power adapter (Select adaptor) UK

10. Display description

B1. Time / alarm time or radio frequency

B2. Light symbol

B3. Auto turn o (Good night)

B4. Shaker

B5. Beep Alarm sound

B6. Radio

B7. Seagull sound

B8. Wind sound

B9. Rain forest so und

B10. Frog sound

B11. Bird sound

B12. FM radio frequency

B13. Alarm 1

B14. Alarm 2

B15. Sleep

B16. Radio station memory

11. Operation

NOTE - All settings will go back to normal time mode after 6 seconds. :

You must complete each section completely without stopping

for more than 6 seconds otherwise it will return to the beginning

of the section.

11.1 Setting the time

 Shortly press the SET MEM (A2) button, the hour will ash.

12:00

 Press the Up ▲

▲

▲▲ (A8) button to set the hour.

 Press the DOWN ▼

▼

▼▼ (A8) button to set the minute then

 Press the SET MEM (A2) button, Choose between 12 and 24 hour

format with the UP▲

▲

▲▲

/ DOWN▼

▼

▼▼ (A8) buttons.

12 hr

 Press the SET MEM (A2) button, Choose Snooze time 5 to 30 minutes

at 5 minutes steps (Default is 5 minutes) with the UP▲

▲

▲▲

/ DOWN▼

▼

▼▼ (

(

( (A8)

)

) )

buttons.

ZZ 05

 Press the SET MEM (A2) button to exit (Time is set ).

12:00

11. Setting and turning on/o the alarm 2

 Short press the ALARM once (A3) button , to set Alarm 1 .

 Then press and hold the ( button until the alarm tone ALARM A3)

sounds. Set the alarm time by pressing UP▲

▲

▲▲ to set the Hour or DOWN▼

▼

▼▼

to set the minutes ( button. A8)

 Then to change the alarm sound ( the alarm must be on), short press SET

MEM (A2) button until you reach your desired alarm sound. The

alarm sound will be displayed on the screen.

The bird, frog, rain forest, wind, seagull, radio or beep

It will display a sound.

 and then short press ALARM

( ) twice. A3

- If you want the shaker to vibrate when the alarm is activated then plug it in

at the back of the clock in ( - A12)

NOTE: If you want to stop the alarm when it is ringing, short press the

ALARM (A3) button

If you do not want the alarm to ring (turn it o completely) then short press

the ALARM (A3) button and then press and hold the ALARM

( ) until the A3 alarm o is displayed on the screen.

OFF

If you want to activate Alarm 2 then repeat the above procedure but short press

ALARM (A3) twice.

11. Settin the light to wake you up 3 g

 Press and hold ( button until the shown in the SNOOZE A5) is

display.

 Press the UP▲

▲

▲▲ or DOWN▼

▼

▼▼ ( button to set the wake up light to OFF,15 A8)

or 30 or minutes.

 The wake up light will gradually brighten before the alarm goes o.

OFF

11.4 Alarm Tone

 Press the TONE (A6) button when the clock is in normal time mode.

 Press the UP▲

▲

▲▲ or DOWN▼

▼

▼▼

( button to set the tone to one of the 10 A8)

possible tone levels.

F05

11.5 Alarm Volume

 Press the or DOWNUP▲

▲

▲▲ ▼

▼

▼▼

( button at normal Time mode for setting the A8)

volume of alarm.

Default volume is U08 and maximum level is U20.

U08

11.6 Connecting Shaker Vibrator

 Connect shaker vibrator at rear jack (A12).

11.7 Light Function

 Shortly press the LIGHT (A7) button normal Time mode. in

The lamp will light up.

 Press the UP▲

▲

▲▲ or DOWN▼

▼

▼▼

( button adjusting the light brightness. A8)

The default intensity L07 shown and the max brightness is L15.

L07

 Press the LIGHT (A7) button again.

To switch OFF the light.

11.8 Radio Function

 Press the RADIO (A4) button normal Time mode. in

The radio frequency currently set will appear on the display.

 Press the or DOWNUP▲

▲

▲▲ ▼

▼

▼▼

(A8) button to set the desired radio

frequency.

Tip: to start the automatic scan, press and hold the UP▲

▲

▲▲ or

DOWN▼

▼

▼▼

(A8) button until the scan start and then release it

again.

 Press the TONE ( button to set the default Volume: A6)

U06 will show the display. on

 Press the UP▲

▲

▲▲ or DOWN▼

▼

▼▼

( button to adjust the volume. A8)

The max volume is U12.

U06

11.9 Preset Radio Station / Listening Preset Radio Station

 While listen , press and hold theing SET MEM (A2) button until S01 shows.

The current radio station is stored in S01.

 Select a new radio station and then press and hold the SET MEM (A2)

button until shows. S02

The new desired radio station is stored in S02.

A maximum of 10 radio stations can be stored. Repeat process to store other

preset stations.

S01

S02

To use a register memory, in mode radio, press the button SET MEM (A2),

S01 is shown or press again to show S02 and TONE (A6) button to valid

S01

S02

11. Goodnight function 10

 Have either the light or the radio on and then press and hold the

SNOOZE ( ) button and A5 SLEEP OFFF will be shown on the display.

 Press the or DOWNUP▲

▲

▲▲ ▼

▼

▼▼

(A8) button to select desired switch off time “ ”

from 5 minutes to 90 minutes.

 You will see the icon ashing on the display SLEEP

SLEEP

OFF

SLEEP

 If you want to see how much time remains before the light/radio goes o then

short Press and hold the ( button. SNOOZE A5)

11. Display Illumination 11

 Press and hold the LIGHT (A7) button until U03 shown at normal time

mode.

Adjusting the display brightness by press the Light button each times.

The brightness changes U03>U04>U01>U02, Max brightness is U04.

U03

11.12 MP3 Playback Function

 Press the RADIO (A4) button.

 Connect the MP3 to the rear jack by cable. (A9)

 AU shown on display.

 Press the ( butt The default Volume U06 will show the TONE A6) on. on

display.

 Press the UP▲

▲

▲▲ or DOWN▼

▼

▼▼

( button for adjusting the volume, and the A8)

max volume is U12.

U06

NOTE: when the audio cable is connected to rear jack ), the radio mode is not (A9

available.

11. Smart Phone Charger Function 13

 Connect your Smart Phone with USB cable to rear USB socket (A10) to

charge

Product specificaties

Merk:	Geemarc
Categorie:	Wekkerradio
Model:	Wake'n'Shake Light

Heb je hulp nodig?

Als je hulp nodig hebt met Geemarc Wake'n'Shake Light stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Wekkerradio Geemarc

Geemarc Wake’n’Shake STAR Handleiding

17 November 2024

Geemarc Wake’n’Shake VINTAGE Handleiding

4 Mei 2024

Geemarc Wake’n’Shake SPOT Handleiding

9 April 2024

Geemarc Wake'N'Shake Voyager V2 Handleiding

9 April 2024

Geemarc Wake'n'Shake DYNAMITE Handleiding

9 April 2024

Geemarc Wake’n’Shake JUMBO Handleiding

9 April 2024

Geemarc Wake 'n Shake Curve Handleiding

6 Juli 2023

Geemarc Wake'n'Shake Light Handleiding

6 Juli 2023

Geemarc Wake & Shake Star Handleiding

22 Juni 2023

Geemarc Wake & Shake Light Handleiding

24 Oktober 2022

Handleiding Wekkerradio

Nieuwste handleidingen voor Wekkerradio

TFA Clocco Cloud 60.2040.15 Handleiding

19 November 2024

TFA 60.2044.01 Handleiding

19 November 2024

TFA Clocco Desk 60.2041.15 Handleiding

19 November 2024

Techno Line Modell N Handleiding

18 November 2024

Techno Line Modell H Handleiding

18 November 2024

Techno Line Modell F Handleiding

18 November 2024

Techno Line WT 330 Handleiding

18 November 2024

Techno Line WT 344 Handleiding

18 November 2024

Techno Line WT 494 Handleiding

18 November 2024

Techno Line Modell L Handleiding

18 November 2024