Geemarc TV-Photo 100 Handleiding

Geemarc Afstandsbediening TV-Photo 100

Lees hieronder de 📖 handleiding in het Nederlandse voor Geemarc TV-Photo 100 (2 pagina's) in de categorie Afstandsbediening. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
The TV-Photo 100 is powered
by two AAA 1.5 volt (Alkaline)
non-rechargeable batteries.
These are not provided.
Fitting the Batteries
1.Totthebatteries,carefully
pushdownandslideopenthe
battery cover.
2. Insert two AAA 1.5 volt
Downloading the
Application
TheTV-photo100requiresthe
correctsoftwaretofunctionwith
yourTV.Youwillneedaccess
to either a desktop PC or laptop
withInternetaccesssothatyou
can download an application
thatallowsyoutondand
downloadthecorrectsoftware
to the TV-photo 100. It is not
possibletouseTV-photo100
withoutthissoftware.
1. Download the Geemarc
applicationtoyourcomputer.
2.Theapplicationuploads
softwaretotheTV-photo100.
3.Oncethesoftwareis
uploaded,youcanusethe
TV-photo100withyourTV.
1.Gotoourwebsite
www.geemarc.com
2. At the search bar (at top
ofthepage)typein«TV-
photo100» then press enter.
3.OntheTV-photo100page,
gotothe«productles
»sectionandclickon«
softwareTV-photo100»to
download the application to
yourcomputer.
4. Once the application has
downloaded,installandopen
it with WINRAR or WINZIP.
WinRAR and WinZIP are
compressedleformats
thatuselessdata.Ifyour
computerdoesnotread
thisleformat,youcan
downloadafreereaderat
these two addresses :
www.winrar.com
& www.winzip.com
5. Open the Geemarc
software:
« » Geemarc.exe
(NOTE: A more recent
version of the software
maybe available). Follow
the on-screen prompts
and install the application.
6.Selectyourlanguageand
press OK.
7. Press next.
8. Choose INSTALL and
authorisetheinstallation
oftheapplicationonyour
computer.
9. Select Finish.
Uploading the Correct
Software to the
TV-photo 100
NOTE: To proceed to the
nextstep,thebatteriesmust
bettedtotheTV-photo100.
Open Geemarc application
installed on your computer.
Ifyouaregivenanoptionto
downloadanupdateforthe
application,pleaseaccept.
ATTENTION:
Turn o sound devices (such
as microphones and speakers)
connected to your computer, or
unplug them before uploading
the software to the remote.
Do not listen to audio / visual
media ( e.g. music, games,
videos ) on the computer at the
same time as programming the
remote control. Set the volume
level on your computer to at
least 80%. You can adjust the
volume level on your computer
by going to settings >
System > Sound > Master
Volume.
1. Remove the battery cover
fromtheTV-photo100.
With the USB/3.5mm cable
provided,carefullyplugthe
USBendofthecableintothe
USB socket (located inside
the battery compartment).
3.TheapplicationwillneedthebrandandmodelofyourTV.You
canndthisinformationonalabelonthebackoftheTV,inthe
UserGuideoftheTVoronthepackaging.
Iftheapplicationdoesn’thaveyourTVmodel,trychoosingasimilar
modelfromthesamebrand(sometimesTVsetmanufacturersuse
thesameremotecontrolforarangeofmodels).
Youcanalsoemail:
unetec@uneteconline.com withthebrandandmodelofyourTV.
Itwillbeaddedtotheapplications’database,orasimilarmodelthat
usesthesameremotewillbesuggested.
4.Under«Device»,selectTV,DTT,DVD,SATdependingonwhether
youwanttousetheTV=photo100withaTVorotherdevicesuch
as a satellite set top box receiver (SAT), DVD player (DVD), or
terrestrialsettopbox(DTT).Tosimplifyyoursearch,typethebrand
andmodelofyourTVinthe«brand»and«model»elds.
5. Press and hold the [V+] and
[V-]keysoftheremotecontrol
for3secondsuntiltheLED
lightunderthe powerbutton
ashes.
6.Ontheapplication,click
totransferthe
programmingsoftwaretothe
TV-photo 100.
7. Disconnect the USB/3.5mm
JackcablefromtheTV-photo
100.YoucannowusetheTV-
photo100withyourTV.
How to use DEVICE and
MEMORY modes
The TV-photo 100 has two
modes: DEVICE and photo
MEMORY.
-InDEVICEmode,youcanuse
the TV-photo 100 in a similar
way to the remote control
suppliedwithyourTV.For
example,toselectchannel1on
theTV-photo100,pressthe«1»
photomemorybutton.
-InphotoMEMORYmode,you
canusethephotobuttonsto
selectvariouschannelsthatyou
have programmed into the TV-
photo 100 (see programming
yourpicturememory).For
How to Switch Between
Photo MEMORY and
DEVICE modes :
- Press and hold the
buttonfor3secondsand
release it as soon as the
LEDlightunderthe
buttonlightsup.Youwill
then see the LED light
underthe powerbutton
lightsuptoshowthatyour
remote is now in DEVICE
mode.
Note: If the application says
the software was successfully
transferred but the LED on
the remote continues to ash,
2.Plugthe3.5mmJackendof
thecableintoyourcomputers
audio/headphoneoutput.
Fitting the USB/3.5mm
Jack cable
HowtoswitchfromDEVICE
modetoPhotoMEMORY
mode :
- Press and hold the
buttonfor3secondsand
release it as soon as the
lightunderthepower
example,youcanprogram
photomemorybutton«5»
so that pressing it selects
channel 13.
it means the transfer failed.
Repeat step 6. if this happens.
Further options : Check the
output headset level in order to
be sure it is not too low. Restart
your computer in order the
software îš¿nishes installing.
Power
LED
LED
Mute
TVsoundvolume
increase
TVsoundvolume
decrease
Photo memory
buttonsto
aid channel
identiîš¿cation
«Exit»key
formenu
navigation
Menu
«AudioVisual»
Change
connection
sourcesforTV
Validatebutton
to navigate
throughthe
menus
«Program»
Directional
keysformenu
navigation /
channel change
USB
Socket
Batteries
Howtoswitchfrom
PhotoMEMORYmodeto
DEVICE mode :
(Alkaline) batteries into the
batteryholder,observingthe
correct -/+ battery polarities.
Note:incorrectttingofthe
batteries may damage the
unit.
3. Slide the battery cover back
over the battery compartment
to close it.
LED
En
Pleasenote:sincethisuser
guidewasprinted,some
changes may have been made
to how the TV-photo 100 is
programmed.Adownloadof
themostrecentversionofthe
userguideisavailablefrom:
www.geemarc.com
Parts Supplied
The packaging contains the
followingparts:
• 1 TV-Photo 100 remote
control
• 1 mini USB/3.5mm Jack
cable
• 1userguide
• 10 plasic key covers
2.Press1,then2.
3. Press buttononce.
4.Press(1)(LEDlightunderthe
powerbuttonashes3
times).
5. Press (8).
6. Press buttononce.
Example: In STORE mode, to
assign channel 12 to Photo
MemoryButton1,andchannel8
toPhotoMemoryButton2.
1. Press the button(for
6 seconds) then release it
whentheLEDlightunderthe
buttonstartstoash.
Note: If no buttons are pressed
within 30 seconds during the
programming process, the
remote will automatically exit the
STORE mode.
Example: In STORE mode, to
assign TV channel 451 to Photo
MemoryButton2.
A. Press the button(for6
seconds) then release it when
theLEDlightunderthe
buttonstartstoash.
B.Press4,then5,then1.
C. Press the buttononce.
D.Press(2)(LEDlightunder
the power buttonashes3
times).
E. Press the buttononce
(orwait30secondswithout
pressinganybuttonstoexit
STORE mode.)
ATTENTION: NOTE: It is not
possible to assign TV channels
to the Power, Mute,AV, V+, V-,
P UP, P DOWN, Back and OK
functionbuttons.
Changing the Channels
that are assigned to the
Photo Memory Buttons
- First method: Repeat the
programming procedure from
step2.AnyofthePhotoMemory
Buttons that have previously
been assigned to a TV channel
can be reprogrammed.
NOTE: This will replace a TV
channelthathadpreviouslybeen
assigned to a Photo Memory
Button.
- Second method:
To erase ALL TV channels that
were previously assigned to
Photo Memory Buttons, press
and hold the and
buttonsuntiltheLEDlightunder
the powerbuttonashes3
times.
Resetting your Remote
to the Factory Settings
- Press and hold the and
buttons  until the LED
light under the power
button ashes 3 times.This
will erase everything that
had been programmed and
uploaded to the TV-Photo
100.
NOTE: All data will be
erased from the TV-photo
100 and you will no longer
be able to use it with your
TV in DEVICE or MEMORY
mode. To use the remote
control, please reinstall the
TV-photo100 application.
Getting Pictures for the
Photo Memory Buttons
A template of the most
popular TV channel logos
in the UK, France and
Germany is available to
download from the product
pageoftheTV-photo100on
DECLARATIONS:
UKCA Directives
Geemarc Telecom SA
hereby declares that
this TV-Photo100 is in
compliance with the
essentialrequirementsand
other relevant provisions
of the Radio Equipment
Directive 2014/53/UE.
The UKCA declaration
of conformity may be
consultedat
www.geemarc.com
Recycling Directives
The WEEE (Waste Electrical and
Electronic Equipment) has been
put in place for the products at
the end of their useful life are
recycled in the best way.
When this product is nished
with,pleasedonotputitinyour
domesticwastebin.Pleaseuse
one of the following disposal
options:
- Remove the batteries and
deposit them in an appropriate
WEEEskip.Deposit theproduct
in an appropriate WEEE skip.
-Or,handtheoldproducttothe
retailer. If you purchase a new
one,theyshouldacceptit.Thus
ifyourespecttheseinstructions
you ensure human health and
environmental protection.
Geemarcguarantee
TVphoto-100fortheperiodof
twoyears.Theguaranteedoes
notcoveraccidents,negligence
or breakage
to any parts. The Geemarc
guaranteeinnowaylimitsyour
legal rights. The product is
covered by the legal guarantee
of conformity as provided by
applicable law.
Important:YOUR RECEIPT IS
PART OF YOUR GUARANTEE
AND MUST BE RETAINED AND
PRODUCED IN THE EVENT OF
AWARRANTYCLAIM.
EEC and WEEE Declarations:
ThisproductrespectstheUKCA
and WEEE.
Marking. The declarations of
conformitycanbefoundat
www.geemarc.com
Garantee
Forproductsupportandhelp
visitourwebsiteat
www.geemarc.com
E-mail : help@geemarc.
com
telephone 01707 387602
lines are open 09h00 to
16h00 Mon to Fri
Parcdel’Etoile,2Rue
Galilée,59760Grande-
Synthe,France.
MadeforGeemarcTelecom
S.A. in China
REGULATORY
COMPLIANCE
FCC CLASS B
NOTE: This equipment has
been tested and found to
comply with the limits for
a Class B digital device,
pursuant to Part 15 of FCC
Rules.
These limits are designed to
provide reasonable protection
against harmful interference in
a residential installation. This
equipment generates, uses and
can radiate radio frequency
energy and, if not installed
and used in accordance with
the instructions, may cause
harmful interference to radio
communications.
However,thereisnoguarantee
that interference will not occur
in a particular installation. If
this equipment does cause
harmfulinterferencetoradio or
television reception, which can
be determined by turning the
equipmento󰀨and on,the user
is encouraged to try to correct
theinterferencebyoneormore
ofthefollowingmeasures:
• Re-orient or relocate the
receiving antenna.
• Increase the separation
betweentheequipmentand
receiver.
•Connecttheequipmentinto
anoutletonacircuitdi󰀨erent
fromthattowhichthe
receiver is connected.
•Consultthedealeroran
experienced radio TV
technicianforhelp.
NOTICE: This class B digital
apparatuscomplieswith
Canadian ICES-003. This
productmeetstheapplicable
IndustryCanadatechnical
speciîš¿cations.
This device complies with Part
15oftheFCCRules.Operation
issubjecttothefollowingtwo
conditions:
(1) this device may not cause
harmful interference, and
(2) this devise must accept
any interference received,
including interference
that may cause undesired
operation.
3. Press once on the button.
4. Press the Photo Memory
Button to assign the TV
channel selected in step
2. The LED light under the
power button  will ash 3
times.
5.ToassignfurtherTVchannels
to Photo Memory Buttons,
repeat the process from step
2,ortoexittheSTOREmode,
press the  button once,
or wait 30 seconds without
pressinganybuttons.
7.Press(2)(LEDlightunderthe
powerbuttonashes3
times).
8. Press the buttononce
(orwait30secondswithout
pressinganybuttonstoexit
STORE mode).
2.SelectaTVchannelthatyou
wish to assign to a Photo
MemoryButton.
Quick explanatory diagram
for programming the channel
(451) in photo memory (2)
UGTV_PHOTO100_WH_En_V.1
Programming your
picture memory
Beforeyoucanassigna
channel to each Photo
MemoryButton(0to9),
makesureTV-photo100
isinMEMORYmode.
1. Press and hold the button
for6secondsandrelease
it as soon as the LED light
underthe powerbutton
startstoash.TheLEDwill
stopashingandstayonto
show that the remote is now
in STORE mode.
Note: If your remote is in Photo
MEMORY mode as you start
step 1. the LED light under the
button will briey light up
before the one under the power
button starts ashing.
Note: If you want to know
which mode your remote
is in:
Press the button once.
If the LED under the
button lights up, the
remote is in DEVICE
mode.
If the LED under the
button lights up,
the remote is in Photo
MEMORY mode.
buttonlightsup.Youwill
then see the LED light
underthebutton
lightsuptoshowthat
yourremoteisnowin
PhotoMEMORYmode.
Customizable
paper sheet for
memory button
ourwebsite.Oncecutout,
they can be slide under
the plastic window of the
Memory Buttons to keep
rmlyinplace.


Product specificaties

Merk: Geemarc
Categorie: Afstandsbediening
Model: TV-Photo 100

Heb je hulp nodig?

Als je hulp nodig hebt met Geemarc TV-Photo 100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Afstandsbediening Geemarc

Handleiding Afstandsbediening

Nieuwste handleidingen voor Afstandsbediening