Garmin GMS 10 Handleiding

Garmin Niet gecategoriseerd GMS 10

Lees hieronder de 📖 handleiding in het Nederlandse voor Garmin GMS 10 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 267 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

The GMS 10 Network Port Expander lets you connect more than two chartplotters

and other Garmin marine network devices to share data. Simply connect one end of the

network cable to your Garmin marine network device and connect the other end of the

network cable to the Expander. Then, your Garmin marine network devices will be able

to share information such as weather, mapping, and sounder data as well as position

information.

Contents

• GMS 10 Network Port Expander (#010-00351-00)

• Garmin marine network cable (#320-00227-00)

• 7-pin power cable (#320-00023-05)

• Grommet (#252-00129-00) Use the grommet to cover holes you drill for cables.

• Optional mounting hardware kit (#K00-00123-00)

Use the kit only if you cannot mount the Expander by using the factory-drilled

holes. The kit contains two brackets with two screws/nuts per bracket. Use the

screws and nuts to attach the bracket to the unit. Screws to secure the Expander to

your boat are not included.

Selecting a proper mount location

Mount your Expander in a location that is away from heavy foot trafﬁ c and where the

network cables can easily reach your Garmin marine network devices and the Expander.

If you foresee purchasing an additional Expander as you add Garmin network devices,

make certain you have enough space to mount two Expanders near each other. Before you

mount the Expander, consider the length at which the network cables will extend when

plugged in to the Expander and allow for this extra space. If you select a mounting loca-

tion that prevents you from using the Expander’s factory-drilled holes, use the brackets

included in the optional mounting kit. (Instructions are included in the mounting kit.)

Connecting the cable to the network port

1. Unscrew the weather cap from a network port by turning the cap counterclockwise.

2. Connect the network cable to the network port by aligning the cable head with the opening

of the network port. Use the black arrow on top of the cable head as an alignment guide.

3. Tighten the cable cap to prevent the cable from vibrating loose.

GMS 10 Network Port Expander Instructions

7-pin power cable

connector

network ports

weather caps

LED indicator

lights

Connecting the cable to a Garmin marine network device

1. Connect the network cable to the network port that is located on your marine network device

(the port is labeled “Network”) by aligning the cable head with the opening of the network

port. Use the black arrow on top of the cable head as an alignment guide.

2. Tighten the cable cap to prevent the cable from vibrating loose.

Connecting the 7-pin power cable to your boat’s battery or fuse block

The GMS 10 Network Port Expander is designed to pass control signals to turn sensors

(such as the Garmin marine weather/audio satellite receiver) on

and off. Thus, when you

power on/off a chartplotter that is connected to an Expander, all sensors that are also con-

nected to the Expander will automatically power on/off as well. This eliminates the need

for you to individually power on/off the sensors through a circuit breaker.

The 7-pin power cable includes a Red and Black wire. Connect the Red wire to the

positive (+) terminal on your battery or fuse block and the Black wire to the negative (-)

terminal. Do not remove the AGC/3AG 2.0 amp fuse located on the Red wire.

Maximizing data sharing among Garmin marine network devices

Use the Expander when you need to connect more than two Garmin marine network

devices. For example, if you have two chartplotters and a sensor (such as the Garmin

marine weather/audio satellite receiver), you can view the sensor’s information on both

chartplotter screens. If you run out of connection space on one Expander, you can add

another Expander to meet your data sharing needs.

Use two Expanders to allow data sharing between an even larger number of chartplotters and sensors.

Use two Expanders to allow data sharing between

two chartplotters and two sensors.

LED Indicator Lights

Three indicator lights appear above each network port on your Expander:

• LNK/ACT: ON means that a link has been established between the Expander and

the attached device. A FLASHING light indicates network activity.

• ON means the attached device is operating at full network capacity. DUP/COL:

OFF or a FLASHING light means the attached device is operating at half capacity.

• ON means the network port is running at 100 megabits per second. OFF 100:

means it is running at 10 megabits per second.

FCC Compliance

The GMS10 Network Port Expander complies with Part 15 of the FCC interference

limits for Class B digital devices FOR HOME OR OFFICE USE. These limits are de-

signed to provide more reasonable protection against harmful interference in a residen-

tial installation, and are more stringent than “outdoor” requirements.

Operation of this device is subject to the following conditions: (1) This device

may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communica-

tions. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, you are en-

couraged to try to correct the interference by one of the following measures: Reorient or

relocate the receiving antenna; increase the separation between the equipment and the

receiver; connect the equipment into an outlet on a circuit different from that to which

the receiver is connected; consult your Garmin dealer or an experienced radio/TV tech-

nician for help.

The GMS10 Network Port Expander does not contain any user-serviceable parts.

Repairs should only be made by an authorized Garmin service center. Unauthorized

repairs or modiﬁ cations could result in permanent damage to the equipment, and void

your warranty and your authority to operate this device under Part 15 regulations.

This product, its packaging, and its components contain chemicals known to

the State of California to cause cancer, birth defects, or reproductive harm. This

Notice is being provided in accordance with California’s Proposition 65. If you have

any questions or would like additional information, please refer to our Web site at

www.garmin.com/prop65.

Speciﬁ cations

Case: Fully gasketed, high-impact plastic alloy

Waterproof: to IEC 60529, level IPX7 (submerged to 1 meter for 30 minutes)

Size: 3.5” W x 2.3” H x 11.8” D (89.0 x 57.2 x 300.8 mm)

Weight: 1.2 lbs

Temperature Range: +5°F to 158°F (-15C to 70C)

Source: 10 to 35 Vdc

Usage: 2.75 watts maximum

Fuse: AGC/3AG 2.0 amp

Product specificaties

Merk:	Garmin
Categorie:	Niet gecategoriseerd
Model:	GMS 10

Heb je hulp nodig?

Als je hulp nodig hebt met Garmin GMS 10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Garmin

Garmin dēzl Headset 210 Handleiding

13 November 2024

Garmin Edge Power Mount Handleiding

2 Oktober 2024

Garmin Approach Z30 Handleiding

23 Juli 2024

Garmin Tacx NEO 3M Handleiding

25 Juni 2024

Garmin Delta SE Handleiding

9 Juli 2023

Garmin Foretrex 801 Handleiding

8 Juli 2023

Garmin BMW Motorrad Navigator VI Handleiding

19 Juni 2023

Garmin GSD 26 Handleiding

18 Juni 2023

Garmin Dash Cam 54 Handleiding

15 Juni 2023

Garmin Varia ERTL615 Handleiding

6 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Vitec MGW Diamond-HX OG Handleiding

23 November 2024

Electrolux STA9 Handleiding

23 November 2024

Electrolux UMP3 Handleiding

23 November 2024

Electrolux ZS70GL Handleiding

23 November 2024

Bosch HEZ8TK36UC Handleiding

23 November 2024

Bosch HEZ8ZZ36UC Handleiding

23 November 2024

Bosch HDZIT301 Handleiding

23 November 2024

Bosch HEZBS301 Handleiding

23 November 2024

LG LX-330 Handleiding

23 November 2024

Stamos S-PLASMA 60U Handleiding

23 November 2024