Garmin GHS10i Handleiding

Garmin Niet gecategoriseerd GHS10i

Lees hieronder de 📖 handleiding in het Nederlandse voor Garmin GHS10i (12 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

GHS10/10i handset

installation instructions

instructions d’installation

istruzioni di installazione

installationsanweisungen

instrucciones de instalación

GHS 10/10i Installation Instructions EN-1

These installation instructions are for

the GHS 10 and GHS 10i handsets.

The GHS 10 is for use with the Garmin

VHF 200 radio and the GHS 10i is for

use with the Garmin VHF 200i radio.

For additional information, refer to the

VHF 100/200 Series Radio Installation

Instructions that came with your radio.

For operational instructions, refer to

your VHF 100/200 Series Radio Owner’s

Manual.

The handset comes with a 32.8 ft. (10 m)

extension cable, a bulkhead mounting

plate, a weather cap, and the necessary

cable hardware.

Install the GHS 10 or GHS 10i

handset at least 20 in. (500

mm) from any compass.

To connect the GHS 10 or GHS 10i

handset:

1. Using the mounting plate as a

template, use a center punch to mark

the three screw locations on the

surface.

2. Use a pencil to trace the cable hole in

the center of the mounting plate. Set

the mounting plate aside.

3. Use a in. (22 mm) hole saw to cut ⅞

the cable-mounting hole.

4. Use a in. (3 mm) drill to drill the ⅛

three mounting-plate holes.

GHS 10/10i Installation Instructions

Mounting

plate

Weather cap Cable nut

Cable-mounting

hole

External speaker

wires

EN-2 GHS 10/10i Installation Instructions

5. Use the three 3.5 × 20 mm, panhead

mounting screws to attach the

mounting plate.

6. Connect the extension cable to the

microphone relocation port on the

rear of the VHF 200 or VHF 200i

radio.

7. Mount the other end of the extension

cable through the mounting plate and

weather cap, securing with the cable

nut.

8. Connect the handset to the extension

cable.

Connecting an external

speaker next to the

GHS 10/10i handset

The green and yellow wires on the

extension cable can be used to connect

an external passive speaker (4 ohm, 5 W

minimum).

1. Connect the yellow wire to the

positive (+) connection on the

external speaker.

2. Connect the green wire to the

negative (-) connection on the

external speaker.

Specications

Dimensions: 6.34 × 2.82 × 1.69 in.

(16.1 × 7.16 × 4.28 cm)

Weight: 12.98 oz. (368 g)

Temperature Range: from 14ºF to

122ºF (from -10ºC to 50ºC)

Compass-safe Distance: 20 in.

(500 mm)

Waterproof: IEC 60529 IPX7

(Immersion in 1 meter of water for

30 minutes)

Please visit www.garmin.com

for additional documentation and

information.

Product specificaties

Merk:	Garmin
Categorie:	Niet gecategoriseerd
Model:	GHS10i
Kleur van het product:	Zwart
Gewicht:	368 g
Breedte:	72 mm
Diepte:	42.8 mm
Hoogte:	161 mm
Snoerlengte:	1.5 m
Beeldscherm:	LCD
Aantal:	1
Kleur kabel:	Zwart
Compatibiliteit:	VHF 200, VHF 300/300 AIS
Type mobiele apparatuur:	Tweewegsradio