Garmin GA 30 GPS Antenna Handleiding

Garmin Niet gecategoriseerd GA 30 GPS Antenna

Lees hieronder de 📖 handleiding in het Nederlandse voor Garmin GA 30 GPS Antenna (36 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 168 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/36

September 2009 190-01139-90_0A Printed in Taiwan

GA 30 GPS Antenna

Installation Instructions

Instructions d’installation

Istruzioni di installazione

Installationsanweisungen

Instrucciones de instalación

Installationsvejledning

Installeringsinstruksjoner

Installationsinstruktioner

GA 30 GPS Antenna Installation Instructions 1

GA 30 GPS Antenna Installation Instructions

The Garmin

GA 30 GPS antenna provides GPS information to your compatible Garmin

chartplotter. The GA 30 connects to compatible Garmin chartplotters using a BNC connector.

Install the GA 30 antenna according to the following instructions. You need the appropriate

fasteners, tools, and mounts listed in each section. These items are available at most marine

dealers.

See the Important Safety and Product Information guide in the compatible Garmin chartplotter box for

product warnings and other important information.

Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or CAUTION:

sanding. When drilling or cutting, always check for clearance on the opposite side of the surface.

Contact Garmin

Contact Garmin Product Support if you have any questions while installing the GA 30. In the

USA, go to www.garmin.com/support, or contact Garmin USA by phone at (913) 397.8200 or

(800) 800.1020.

In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000.

In Europe, go to www.garmin.com/support and click for in-country support Contact Support

information, or contact Garmin (Europe) Ltd. by phone at +44 (0) 870.8501241.

Product Registration

Help us better support you by completing our online registration today. Go to http://my.garmin

.com. Keep the original sales receipt, or a photocopy, in a safe place.

For future reference, write the serial number assigned to your GA 30 antenna in the space

provided. It is located on a sticker on the back of the unit.

Serial number

Packing List and Tools Needed

Before installing your unit, conrm that your package includes the following items. If any parts

are missing, contact your Garmin dealer immediately.

Standard Package

GA 30 antenna

Antenna cable

Surface-mount bracket

Pole-mount bracket

Under-deck mount bracket

Mounting hardware

(screws and adhesive pads)

Installation instructions

•

Tools Needed

Drill and drill bits

Hole saw, 1 in. (25 mm) (surface-mount

cable hole)

Screwdriver (surface-mount screws)

Center punch and hammer

(to mark surface-mount pilot holes)

Countersink bit (when mounting on

berglass)

Marine sealant (for certain mounting

options)

•

Product specificaties

Merk:	Garmin
Categorie:	Niet gecategoriseerd
Model:	GA 30 GPS Antenna
Kleur van het product:	Wit
Compatibiliteit:	Garmin AIS 600\nGPS 152\nGPSMAP 551/551s/556/556s