Ganz Genstar ZN8-N4NFN4 Handleiding

Ganz Bewakingscamera Genstar ZN8-N4NFN4

Lees hieronder de 📖 handleiding in het Nederlandse voor Ganz Genstar ZN8-N4NFN4 (1 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

2. Sensor image settings

and Motor-zoom control

User can set sensor parameters in "Live" tab by clicking right

mouse button on Live image and selecting " " from Sensor

context menu, like shown on below picture. It will show popup

window with sensor parameters which we can modify.

This menu provides possibility to control lens Motor-zoom

(depends on camera model).

To modify sensor parameters we must to change mode from ,

standard to " in configuration menu Debug Mode" .

4. Setting IP address in camera:

- Using web browser

In tab expand menu and select Configuration Device

Local Network option To set static IP address You must to .

disable client mode by moving switch to DHCP OFF

position. Next You must to enter planned IP addresses to

camera configuration You must to remember to fill correctly .

available fields with acceptable addresses (add likeress

"0.0.0.0" not complete are not allowedor ).

! Basic informations about IP addresses

For addressing You should use addresses containing 4

segments separated by " " sign. which should be compatible dot

with standard address rule in LAN network Using not complete .

addresses or containing less than 4 segments separation sign ,

will be other from " will be used "dot or restricted IP add sre s

starting with "0" ( . 0.1.2.3) ending on "255" (ex. ex or

8.8.8.255), will cause an error when saving configuration by

clicking - ."Apply" button

Configuration menu is displayed like showed below.

- Using dedicated tool attached on CD

"GANZ-ZN8-series_IPSearchTool"

You need to run application from attached CD In tool menu .

You need to click " " button After camera search, You Start .

need to select device in which we want to change IP setting (in

" " column, there are typed Device ID end segments of

device MAC address) and input planned address to camera

configuration, which we applies by clicking " " button. Modify

5. Video Streams configuration

In tab expand menu and select Configuration Stream

Base Stream option First of all You need to decide which .

stream You want to modify by selecting Stream ID

dropdown list After parameter configuration You need to save . ,

settings for each stream separately by clicking " " button. Apply

Next streams parameters we can define in the same way by

changing ID and saving parameters like before.

GANZ ZN8-series IPC

Quick Start

1. Log to camera WWW interface in

Open web browser type camera IP address (default - ,

http://192.168.1.168) in browsers address field

and click Enter key.

! Warning - one IP address and two cameras

Two cameras cannot work with the same IP address in one

network In this case You should add cameras "one by one" .

and modify their IP addresses manually or use dedicated tool -

GANZ-ZN8-series_IPSearchTool (attached on CD).

Enter username and password.

Default login credentials - ADMIN / 1234.

Change password after first login to camera to ensure system

security.

You can change language in camera menu on login page.

Click on Login button.

Main page will be displayed.

! Warning - IP address and DHCP

Camera has enabled by default DHCP client feature what

means, when we connect camera to network in which works

DHCP server (ex. router) then camera recive address from this

network pool and for discover it we need to use dedicated tool t

- (attached on CD).GANZ-ZN8-series_IPSearchTool

Mind you respected user, important operations and

maintenance (repair) guide are described in the

attached product instruction.

Mind you respected user, uninsulated "dangerous

voltage" exists, please be aware of electric shock.

- Power supply must pass safety certification ,Its output

voltage, current, voltage polarity and operating temperature

must match requirement of this equipment.

- Please install lightning protection devices or cut off the

power in thunder and lightning conditions.

- To capture high-quality video and pictures, please make

sure the network connection is stable and smooth.

- To prevent the sensor pull light phenomenon, prohibit

putting the lens under bright light for a long time.

- The equipment must not be installed under the air door of

air conditioner , otherwise the lens will become blurry and

condenses into moisture.

- When install, repair or clean the equipment, please make

sure the power has been turned off.

- Prohibit putting this equipment to work in strong magnetic

field and laser beam environment.

3. OSD configuration

In tab expand menu and select Configuration Device

OSD option. Here You can decide which elements should be

visible on camera image and their parameters.

Product specificaties

Merk:	Ganz
Categorie:	Bewakingscamera
Model:	Genstar ZN8-N4NFN4
Kleur van het product:	Black, White
Gewicht:	700 g
Breedte:	101.6 mm
Hoogte:	96.5 mm
Soort:	IP-beveiligingscamera
Internationale veiligheidscode (IP):	IP66
Ondersteund audioformaat:	G.711, PCM
Vormfactor:	Rond
Ondersteuning voor plaatsing:	Buiten
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Montagewijze:	Muur
Ondersteunde video-modi:	1080p
Maximum resolutie:	1920 x 1080 Pixels
Totaal aantal megapixels:	- MP
Videocompressieformaten:	H.264, M-JPEG
Type stroombron:	DC, PoE
Stroomuitvoer (volt):	12
Minimale belichting:	0.2 Lux
Field of view (FOV) hoek:	75 °
Aantal cameras:	1
Nachtvisie:	Ja
LED-type:	IR
Vaste focale lengte:	3.6 mm
Video bewegings-detectie:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Vermogensverbruik (max):	2.5 W
Certificering:	CE, FC, Onvif
Omvang optische sensor:	1/3 "
Type beeldsensor:	CMOS
Camera sluitertijd:	1/5 - 1/20000 s
Witbalans:	Auto
Ruisonderdrukking:	Ja
Lengte:	297.2 mm
Maximaal 30 frames per seconde:	30 fps
Ondersteunde netwerkprotocollen:	HTTP, HTTPS, TCP/IP, UDP/IP, RTSP, DHCP, NTP, PPoE, Unicast / Multicast, ONVIF
Dag/nacht modus:	Ja
Maximum aperture number:	2
BNC output ports:	1
Aantal sensoren:	1
Videostreaming:	Ja
Aantal verlichtingen LEDS:	2
Aantal effectieve pixels (H x V):	1920 x 1080 Pixels
Alarm ingang/uitgang:	Ja
Highlight Compensation (HLC) (compensatie voor sterke belichting):	Ja
Aanpassing van de afbeeldingskwaliteit:	Brightness, Contrast, Saturation, Sharpness
Wide Dynamic Range (WDR):	Ja
Bitrate:	500kb - 12000kb
Bedrijfstemperatuur (T-T):	-20 - 55 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 90 procent
Audio invoer kanalen:	1
Ruisonderdrukkingstechnologie:	3D-ruisonderdrukking