G-Technology CM01 Handleiding

G-Technology Grasmaaier CM01

Lees hieronder de 📖 handleiding in het Nederlandse voor G-Technology CM01 (20 pagina's) in de categorie Grasmaaier. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/20
Safety and Instruction Manual for
CM01 Cordless Cylinder Mower
IMPORTANT:
READ ALL INSTRUCTIONS
BEFORE USE.
RETAIN INSTRUCTIONS FOR FUTURE
REFERENCE.
WARNING:
THIS PRODUCT CAN CAUSE SERIOUS
INJURIES.
Read all instructions. Failure to follow
all instructions listed below may result in
electric shock, re and/or serious injury.
The term “power tool” in all of the warnings
listed below refers to your mains-operated
(corded) power tool or battery-operated
(cordless) power tool.
WARNING:
When using any electrical appliance,
basic safety precautions should always be
observed, including the following, to reduce
the risk of re, electrical shock, or injury.
Work area:
•Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
•Mow only in daylight or good articial light
•Thoroughly inspect the area where
the mower is to be used and move any
object which may jam or be thrown by the
machine.
•Do not operate power tools in explosive
atmospheres, such as in the presence of
ammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust and fumes.
•Keep children, bystanders, and pets
away while operating the power tool,
distractions can cause you to lose control.
•Not to be used as a toy. Not to be used
near children.
•Never allow children or people unfamiliar
with these instructions to use the power
tool. Local regulations may restrict the age
of the operator.
•When not in use store the power tool out
of the reach of children.
•Always be sure of your footing on slopes,
do not over-reach or use on excessively
steep slopes.
•Mow across the face of slopes, never up
and down.
•Take extreme caution when changing
direction on slopes.
•Avoid operating the mower in wet grass
where possible.
Electrical safety:
•Power tool plugs must match the outlet.
Never modify the plug in any way.
•Do not use any adaptor plugs with
earthed (grounded) power tools.
Unmodied plugs and matching outlets
will reduce the risk of electric shock.
•Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if
your body is earthed or grounded.
•Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
•Do not abuse the charger cord. Never
use the charger cord for carrying the
charger, or pulling and unplugging the
power tool. To disconnect the charger
from an outlet grasp the plug and pull to
disconnect. Damaged or entangled cords
increase the risk of electric shock.
•Keep charger cord away from heat, oil,
sharp edges or moving parts.
•When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
•If the cord becomes damaged during use
disconnect the cord from the power supply
immediately- do not touch the cable
before disconnecting.
•Before use check the power supply and
charger cables for signs of damage or
ageing.
•When charging or operating the power
tool it is recommended that the appliance
Important Safeguards

Product specificaties

Merk: G-Technology
Categorie: Grasmaaier
Model: CM01

Heb je hulp nodig?

Als je hulp nodig hebt met G-Technology CM01 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Grasmaaier G-Technology

G-Technology

G-Technology RLM50 Handleiding

24 Januari 2024
G-Technology

G-Technology CLM001 Handleiding

24 Januari 2024
G-Technology

G-Technology CLM50 Handleiding

24 Januari 2024
G-Technology

G-Technology CM01 Handleiding

24 Januari 2024

Handleiding Grasmaaier

Nieuwste handleidingen voor Grasmaaier

Anova

Anova CC146T Handleiding

20 December 2024
Anova

Anova E60BC Handleiding

20 December 2024
Anova

Anova CC151T Handleiding

20 December 2024
Gude

Gude 320/20-4 Handleiding

19 December 2024
Zipper

Zipper ZI-MOS4T Handleiding

19 December 2024
Ozito

Ozito CPM-300C Handleiding

10 December 2024
Powerblade

Powerblade 350CX Handleiding

10 December 2024
Powerblade

Powerblade V475 Handleiding

10 December 2024
Stihl

Stihl RM 253 Handleiding

8 December 2024
Baumr-AG

Baumr-AG 790SXe Handleiding

7 December 2024