Fuzzix PLB10 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Fuzzix PLB10 (16 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
Plasma Ball
Ref. nr.:153.172; 153.173
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
GEBRAUCHSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSƁUGI
V2.0
2
ENGLISH
Congratulations to the purchase of this Fuzzix oduct. Please read this manual thoroughly prior to using the product in order to pr
benet fully from all features.
Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions
to avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the product, please ask advice from a
specialist. When the product is switched on for the rst
time, some smell may occur. This is normal and will
disappear after a while.
- The product contains voltage carrying parts. Therefore do
NOT open the housin g.
- Do not place metal objects or pour liquids into the
product. This may cause electrical shock and
malfunction.
- Do not place the product near heat sources such as
radiators, etc. Do not place the product on a vibrating
surface. Do not cover the ventilation holes.
- The product is not suitable for continuous use.
- careful with the mains lead and do not damage it. A Be
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the product from a mains outlet,
always pull the plug, never the lead.
- Do not plug or unplug the product with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualied technician.
- If the product is damaged to such an extent that internal
parts are visible, do NOT plug t product into a mains he
outlet and DO NOT switch the unit on. Contact your
dealer. Do NOT connect the product to a rheostat or
dimmer.
- To avoid re and shock hazard, do not expose the
product to rain and moisture.
- All repairs should be carried out by a alied technician qu
only.
- nnect the product to an earthed mains outlet (220-Co
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the product will not be used
for a longer period of time, unplug it from the mains. The
rule is: Unplug it from the mains when not in use.
- If the product has not been used for a longer period of
time, condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the
product in humid rooms or outdoors.
- To prevent accidents in com ies, you must follow the pan
applicable guide lines and follow the instructions.
- Do not repeatedly switch the product on and o. This
shortens the life time.
- Keep the product out of the reach of children. Do not
leave the product unattended.
- Do not use cle ng sprays to clean switches. The ani
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the controls.
- his product is with speaker inside which can cause If t
magnetic eld. Kee the product at least 60cm away p
from computer or . TV
- e product has built-in lead-acid rechargeable battery. If th
Please recharge the battery every 3 months if you are
not going to use the unit for a long period of time. Or the
battery may be damaged.
- I he battery is damaged please replace with same f t
specications battery. And dispose the damaged battery
environment friendly.
- If the product has fallen, always have it checked by a
qualied technician before you switch the product on
again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the product with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the product o prior to unplugging it from the
mains and/or other equipment. Unplug all leads and
cables prior to moving the product.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220- 0Vac/50Hz. Check if power 24
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this product.
- Keep the original packing material so that you can
transport the produc in safe conditions.t
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions at are contained in the manual and that p2-he should th
read and adhere to.
The product has been certied CE. It is prohibited to make any changes to the product. They would invalidate the CE certicate
and their guarantee!
NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/41°F and
35 95°C/ °F .
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the y to proceed. The specications are typical. The actual values can slightly change from one unit to the other. wa
Specications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also
invalid your warranty. The warranty is not applicable in case of accidents or damages caused by in or disrespect of the appropriate use
warnings contained in this manual. Fuzzix cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCTION
CAUTION! Carefully unpack the box on receipt. Check the contents to ensure that all parts are present and have been up
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be
returned, it is important that the product is returned in the original factory box and packaging.
If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched o until it has reached room temperature.
POWERSUPPLY
On the label on the backside the product is indicated on this type of power supply must be connected. Check that the mains of
voltage corresponds to this, all other voltages than specied, the light eect can be irreparably damaged. The product must also
be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or re.
OPERATING INSTRUCTIONS
Place the lamp on a at surface and make sure that there are no ammable materials near the lamp.
Connect the plug of the adapter to the plasma bulb and then plug the adapter into a wall socket.
The selector switch has 3 positions: OFF / AUDIO / ON
The plasma ball contains a gas mixture. When the switch is set to "ON", the product base produces high-frequency
electromagnetic waves, which transform the gases into plasma - an ionised or electrically charged gas.
The ions produced emit energy that appears as coloured light laments. The plasma ball reacts to your touch, with the light
beams following your ngers when you touch the ball. You may feel a slight tingling sensation when your hand comes close to
the glass and touches it. This is caused by the vibrations on the glass ball when the electrons hit the surface of the ball.


Product specificaties

Merk: Fuzzix
Categorie: Verlichting
Model: PLB10

Heb je hulp nodig?

Als je hulp nodig hebt met Fuzzix PLB10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Verlichting Fuzzix

Fuzzix

Fuzzix MB30M Handleiding

5 November 2024
Fuzzix

Fuzzix MB40 Handleiding

5 November 2024
Fuzzix

Fuzzix PLB10 Handleiding

5 November 2024
Fuzzix

Fuzzix PLB20 Handleiding

5 November 2024
Fuzzix

Fuzzix Aurora Handleiding

5 November 2024
Fuzzix

Fuzzix PLP10 Handleiding

5 November 2024
Fuzzix

Fuzzix PLB20S Handleiding

4 November 2024
Fuzzix

Fuzzix MBM400 Handleiding

4 November 2024
Fuzzix

Fuzzix DJ10 Handleiding

4 November 2024

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting