Furuno NAVpilot-711 Handleiding

Furuno Niet gecategoriseerd NAVpilot-711

Lees hieronder de 📖 handleiding in het Nederlandse voor Furuno NAVpilot-711 (100 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/100

AUTOPILOT

NAVpilot-700/711/720

Installation Manual

SYSTEM CONFIGURATION .........................ii

EQUIPMENT LISTS ......................................iii

1. HOW TO INSTALL THE UNITS ............ 1-1

1.1 Control Unit FAP-7001/FAP-7011...... 1-1

1.1.1 Surface mount.......................... 1-2

1.1.2 Desktop mount......................... 1-4

1.2 Processor Unit FAP-7002 .................. 1-5

1.3 Rudder Reference Unit FAP-6112 ..... 1-7

1.4 Remote Controllers (option)............... 1-9

1.5 Distributor FAP-6800 (option) .......... 1-12

1.6 Control Unit FAP-7021 ..................... 1-13

1.7 Cable Extension Kit

FAP-7822 (option)............................ 1-13

2. WIRING.................................................. 2-1

2.1 General Wiring ................................... 2-1

2.2 Processor Unit.................................... 2-2

2.2.1 Connections inside the processor

unit ........................................... 2-2

2.2.2 How to fasten cables to the cable .

clamps...................................... 2-3

2.2.3 How to put wires into the connector

blocks....................................... 2-4

2.2.4 How to terminate of NMEA2000

connection................................ 2-5

2.2.5 Power and motor cables .......... 2-5

2.2.6 Teleflex linear sensor............... 2-7

2.2.7 CAN bus power........................ 2-8

2.2.8 Connection to TB4 ................... 2-8

2.3 Control Unit ........................................ 2-8

2.4 Remote Controllers (option)............... 2-9

2.4.1 Example remote controller

connections............................ 2-10

2.4.2 Prohibited remote controller

connections............................ 2-11

2.5 Input/Output Sentences ................... 2-12

3. INITIAL SETTINGS ............................... 3-1

3.1 About Initial Settings, Menu Operation3-1

3.2 How to Select Language and Units,

Open the Installation Menu ................ 3-2

3.3 Display Setup ..................................... 3-4

3.4 Ship’s Characteristics Menu............... 3-5

3.5 Dockside Setup Menu ........................ 3-6

Dockside setup for RRU..................... 3-6

Dockside setup for Fantum

FeedbackTM ..................................... 3-15

3.6 CAN bus Port Setup......................... 3-17

3.7 NMEA0183 Port Setup..................... 3-18

3.8 Sensor Setup.................................... 3-20

3.9 Universal Port Setup ........................ 3-21

3.10 Sea Trial........................................... 3-23

3.11 Data Calibration................................ 3-25

3.12 PARAMETER SETUP Menu ........... 3-26

3.13 AUTO OPTION Menu....................... 3-30

3.14 NAV OPTION Menu ......................... 3-31

3.15 FISH HUNTER OPTION Menu or

WIND OPTION Menu....................... 3-34

3.15.1FISH HUNTER OPTION

menu ...................................... 3-34

3.15.2WIND OPTION menu............. 3-35

3.16 SYSTEM SETUP Menu.................... 3-36

3.17 RC (Remote Controller) SETUP

Menu ................................................ 3-37

3.18 All Clear............................................ 3-37

JIS CABLE GUIDE ................................. AP-1

PACKING LISTS ........................................A-1

OUTLINE DRAWINGS ...............................D-1

INTERCONNECTION DIAGRAM............... S-1

MOUNTING TEMPLATES

www.furuno.com

All brand and product names are trademarks, registered trademarks or service marks of their respective holders.

The paper used in this manual

is elemental chlorine free.

・FURUNO Authorized Distributor/Dealer

9-52 Ashihara-cho,

Nishinomiya, 662-8580, JAPAN

A : JAN 2010

Printed in Japan

F1 : JUN . 12, 2012

Pub. No. IME-72720-F1

00017181315

(REFU ) NAVpilot-700/711/720

00017181315

* 0 0 0 1 7 1 8 1 3 1 5 *

WARNING

Turn oﬀ the power at the switchboard

before beginning the installation.

Fire or electrical shock can result if the

power is left on.

Use the proper power cable.

Use JIS type DPY-2.5 or the equivalent.

Other types can cause fire.

Conﬁrm that no one is near the rudder

when bleeding air from oil cylinder.

The rudder may move unexpectedly,

possibly causing bodily injury.

When connecting a geomagnetism

detection type heading sensor,

correct magnetic ﬁeld deviation.

If an autopilot is used without the compen-

sation, unexpected course change may

occur.

Set REMOTE CONTROLLER 1/2 on

SYSTEM SETUP menu properly accord-

ing to remote controller connected.

If not done properly, malfunction may

occur. Especially, take care when

setting the NFU-type remote controller.

CAUTION

Control

Unit

Standard Steering

compass compass

0.35 m 0.30 m

Conﬁrm that the power supply voltage

is compatible with the voltage rating

of the equipment.

Connection to the wrong power supply

can cause fire or damage the equipment.

Observe the following compass safe

distances to prevent interference to a

magnetic compass:

Separate the reversible pump at least one

meter from communications equipment,

communications antenna and communi-

cations cabling to prevent interference.

Processor Unit

FAP-7002 0.45 m 0.30 m

Remote

controllers 0.30 m 0.30 m

FAP-7001

FAP-7011 0.35 m 0.30 m

FAP-7021 0.35 m 0.30 m

SAFETY INSTRUCTIONS

WARNING

Indicates a condition that can cause death or serious injury if

not avoided.

CAUTION

Indicates a condition that can cause minor or moderate injury if

not avoided.

Warning, Caution Mandatory Action

Prohibitive Action

Please read these safety instructions before you install the equipment.

Product specificaties

Merk:	Furuno
Categorie:	Niet gecategoriseerd
Model:	NAVpilot-711

Heb je hulp nodig?

Als je hulp nodig hebt met Furuno NAVpilot-711 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Furuno

Furuno 1751 Mark-2 Handleiding

8 Juli 2023

Furuno GP-1650WDF Handleiding

5 Juli 2023

Furuno GP-33 Handleiding

19 Juni 2023

Furuno 1761 Mark-2 Handleiding

16 Juni 2023

Furuno DRS2D Handleiding

15 Juni 2023

Furuno TZTL15F Handleiding

14 Juni 2023

Furuno Verado Handleiding

14 Juni 2023

Furuno GP-330B Handleiding

13 Juni 2023

Furuno 1761 Mark-3 Handleiding

12 Juni 2023

Furuno GP-7000F Handleiding

12 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Vitec MGW Diamond-HX OG Handleiding

23 November 2024

Electrolux STA9 Handleiding

23 November 2024

Electrolux UMP3 Handleiding

23 November 2024

Electrolux ZS70GL Handleiding

23 November 2024

Bosch HEZ8TK36UC Handleiding

23 November 2024

Bosch HEZ8ZZ36UC Handleiding

23 November 2024

Bosch HDZIT301 Handleiding

23 November 2024

Bosch HEZBS301 Handleiding

23 November 2024

LG LX-330 Handleiding

23 November 2024

Stamos S-PLASMA 60U Handleiding

23 November 2024