Furuno DRS2D Handleiding

Furuno Niet gecategoriseerd DRS2D

Lees hieronder de 📖 handleiding in het Nederlandse voor Furuno DRS2D (52 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/52
www.furuno.com
Installation Manual
RADAR SENSOR
DRS2D/DRS4D/
DRS4A/DRS6A/DRS12A/DRS25A
SAFETY INSTRUCTIONS ............................................................................ i
SYSTEM CONFIGURATION ....................................................................... ii
EQUIPMENT LISTS.................................................................................... iv
1. MOUNTING ............................................................................................ 1
1.1 Mounting Considerations..............................................................................................1
1.2 Mounting Procedure for DRS2D/4D .............................................................................2
1.3 Mounting Procedure for DRS4A/6A/12A/25A...............................................................3
1.4 Mounting of Power Supply Unit .................................................................................... 8
2. WIRING ................................................................................................ 11
2.1 Wiring inside DRS2D/4D ............................................................................................15
2.2 Wiring inside DRS4A/6A/12A/25A..............................................................................19
2.3 Wiring of Power Supply Unit.......................................................................................23
SPECIFICATIONS ................................................................................. SP-1
PACKING LISTS...................................................................................... A-1
OUTLINE DRAWINGS............................................................................. D-1
INTERCONNECTION DIAGRAMS.......................................................... S-1
i
WARNING WARNING
Wear a safety belt and hard hat when
working on the antenna unit.
Serious injury or death can result if
someone falls from the radar mast.
Model Distance to
100 W/m2point
Distance to
10 W/m2point
DRS4A Nil 1.20 m
Nil 1.20 m
CAUTION
Do not open the equipment unless
totally familiar with electrical circuits
and service manual.
Only qualified personnel should work
inside the equipment.
Ground the equipment to prevent
electrical shock and mutual
interference.
Model Standard Steering
DRS4A 0.80 m 0.50 m
DRS6A 0.85 m 0.55 m
Radio Frequency Radiation Hazard
DRS6A
SAFETY INSTRUCTIONS
DRS12A
DRS2D Nil 0.40 m
0.10 m 1.40 m
DRS4D
DRS4D
1.40 m 0.85 m
DRS2D 1.35 m 0.80 m
0.20 m 2.40 mDRS12A (XN12A)
DRS12A (XN13A) 0.20 m 1.90 m
1.15 m 0.70 m
PSU-012
0.30 m 0.30 m
PSU-013
0.30 m 0.30 m
DRS25A 1.00 m 0.60 m
0.50 m 5.30 m
DRS25A (XN12A)
DRS25A (XN13A) 0.40 m 4.40 m
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Read these safety instructions before installing the equipment.
WARNING
Indicates a potentially hazardous situation which, if not avoided,
canresult in minor or moderate injury.
Warning, Caution Prohibitive Action
CAUTION
Mandatory Action
The radar antenna emits electromagnetic radio
frequency (RF) energy which can be harmful,
particularly to your eyes. Never look directly into
the antenna aperture from a close distance while
the radar is in operation or expose yourself to the
transmitting antenna at a close distance.
Distances at which RF radiation levels of 100 and
10 W/m2 exist are given in the table below.
Note: If the antenna unit is installed at a close
distance in front of the wheel house, your
administration may require halt of transmission
within a certain sector of antenna revolution. This
is possible - Ask your FURUNO representive or
dealer to provide this feature.
Construct a suitable service platform
from which to install the antenna
unit.
Serious injury or death can result if the
power is left on or is applied while the
equipment is being installed.
Turn off the power at the mains
switch board before beginning the
installation.
Fire, electrical shock or serious injury
can result if the power is left on or is
applied while the equipment is being
installed.
Observe the following compass safe distance
to prevent deviation of a magnetic compass.
PSU-017
0.30 m 0.30 m

Product specificaties

Merk: Furuno
Categorie: Niet gecategoriseerd
Model: DRS2D

Heb je hulp nodig?

Als je hulp nodig hebt met Furuno DRS2D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Furuno

Furuno

Furuno 1751 Mark-2 Handleiding

8 Juli 2023
Furuno

Furuno GP-1650WDF Handleiding

5 Juli 2023
Furuno

Furuno GP-33 Handleiding

19 Juni 2023
Furuno

Furuno 1761 Mark-2 Handleiding

16 Juni 2023
Furuno

Furuno DRS2D Handleiding

15 Juni 2023
Furuno

Furuno TZTL15F Handleiding

14 Juni 2023
Furuno

Furuno Verado Handleiding

14 Juni 2023
Furuno

Furuno GP-330B Handleiding

13 Juni 2023
Furuno

Furuno 1761 Mark-3 Handleiding

12 Juni 2023
Furuno

Furuno GP-7000F Handleiding

12 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Smeg

Smeg GTA-6 Handleiding

21 November 2024
Smeg

Smeg KIT6CX Handleiding

21 November 2024
Senal

Senal SCS-98 Handleiding

21 November 2024
Senal

Senal ASM-6 Handleiding

21 November 2024
Senal

Senal ASM-MNTKIT Handleiding

21 November 2024
Senal

Senal SMS-45 Handleiding

21 November 2024
Smeg

Smeg KIT6PX Handleiding

21 November 2024
Senal

Senal SCI-3212MP Handleiding

21 November 2024
Matterport

Matterport Pro2 3D Camera MC250 Handleiding

21 November 2024
Senal

Senal OLM-2S-P Handleiding

21 November 2024