Fredenstein V.A.S. Mic-Pre Handleiding

Fredenstein Receiver V.A.S. Mic-Pre

Lees hieronder de đź“– handleiding in het Nederlandse voor Fredenstein V.A.S. Mic-Pre (7 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
V.A.S.
MIC-PRE
Operating Manual
Fredenstein V.A.S. Microphone Preamplifier
The V.A.S. Microphone Preamplifier is a single channel stand-alone device. The V.A.S. MicPre
features top of the line performance, key component to achieve this performance level is our new
OPA2 discrete audio operational amplifier. As all Fredenstein products, it is not a copy of an older
design, but a completely new circuitry manufactured in SMT technology. Matched and integrated
dual input transistors guarantee vastly improved specifications compared to older designs. The
OPA2, following the tradition of well known manufactures, is socketed and can be exchanged
without tools. The industry standard pin-out makes it compatible with many manufactures. Another
very important sound shaping component is the American-made steel-core output transformer,
which has this smooth vintage sound without being dark or just “mid-rangy” and at the same time,
the V.A.S. MicPre is very quiet.
A 100K Ohms high impedance direct input is located on the front-panel, it accepts balanced and
unbalanced signals, the rear microphone input is automatically disconnected when a plug is inserted
in the DI connector.
The features include a maximum gain of 65 dB, Output-Level Control, a 20 dB Pad, switchable
polarity, selectable input impedance, switchable Low-Cut filter, and Phantom-Power support. Our
new eight LED Peak-Meter with a 50 dB range gives the user a precise reading of the operating
conditions. For added versatility, a hybrid headphone amplifier with separate volume control is
integrated to allow precise monitoring.
The balanced input and the balanced output are available on XLR and TRS connectors. An
unbalanced insert is also provided to connect effect equipment.
With the optional rack mount kit, two V.A.S. devices can be mounted together to form a 19 inch 1U
enclosure (table feet need to be removed).
For easy touring and recording around the world, the V.A.S. MicPre has a built-in universal power
supply ranging from 90VAC to 240VAC, 50 -60 Hz.
As all Fredenstein products, the V.A.S. MicPre is designed by a German-American team and
manufactured in Taiwan.
Fredenstein V.A.S. MicPre Manual V1.1 Oct. 2, 2014 Page 1
Fredenstein V.A.S. Microphone Preamplifier
Installation:
Electrical Safety Warnings:
Do not open the enclosure, hazardous voltages are present inside!
There are no user serviceable parts inside.
If you need to replace the mains fuse, make sure the replacement has the same
rating (0.5AT 250V).
Rear View:
Please connect your microphone input and the output first to the XLR or TRS
connectors located on the back panel. Connect the mains cable to the V.A.S. MicPre
and then to a grounded mains outlet. The power ON/OFF switch is located on the
back panel near the power cable connector (IEC). After the unit is powered on, the
PWR indicator on the front panel will be illuminated.
An unbalanced insert is also provided on the back-panel to connect effect equipment.
Fredenstein V.A.S. MicPre Manual V1.1 Oct. 2, 2014 Page 2


Product specificaties

Merk: Fredenstein
Categorie: Receiver
Model: V.A.S. Mic-Pre

Heb je hulp nodig?

Als je hulp nodig hebt met Fredenstein V.A.S. Mic-Pre stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Fredenstein

Handleiding Receiver

Nieuwste handleidingen voor Receiver