Focus SlimFocus Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Focus SlimFocus (28 pagina's) in de categorie Haarden. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/28
SLIMFOCUS
____
INSTALLATION, SERVICING
AND USER INSTRUCTIONS
02
General NotesContent
This Focus gas appliance is a High Efficiency, Balanced Flue Live Fuel
Effect appliance. It provides radiant and convected heat using the latest
burner technology.
Before Installation, check that the local distribution conditions, nature of
the gas and pressure, and adjustment of the appliance are compatible.
This appliance is intended for use on a gas installation with a governed
meter.
This Gas Installation may only be installed by a registered professional
competent person (Gas Safe installer in the UK). The installation must
adhere to the requirements of the local and national Building regulations
and national standards. The installation manual must also be followed.
Ensure that the Flue Terminal is not in any way obstructed and is clear of
vegetation, i.e. trees, shrubs etc. and that no objects are leant against the
terminal or guard.
Always clean the Window Panel before the fire is ignited. Any finger prints
must be removed, as these will be burnt into the glass and will be un-
removable.
Do not operate this appliance if the glass panel has been broken (or
cracked), removed or with firebox access panels open.
Only flue approved by Focus for this appliance may be used.
This appliance is a balanced flue product and is room sealed and as such
requires no additional ventilation for operation. However an adequate
supply of fresh air to maintain temperatures and a comfortable environment
is recommended.
This appliance is designed as a heating appliance, and as such will get
very hot in operation; all surfaces (except the controls and access door)
are considered to be working surfaces and as such should not be touched.
The front windows and surrounds are not considered to be fully secure
guards against accidental contact. It is recommended that an approved
fire screen be used if children, the elderly or persons with limited mobility
are to be present in the same area.
Do not place curtains, laundry, furniture etc. within a safe distance of
300mm of this appliance.
Do not attempt to burn rubbish on this appliance.
If this appliance is extinguished, on purpose or other, no attempt to relight
should be made within 3 minutes.
General Notes
User instructions
EMERGENCY GAS ISOLATION
FIRST TIME OF OPERATION
OPERATING INSTRUCTIONS
A. GENERAL NOTES
B. SETTING THE ELECTRONIC CODE (first time use only)
C. SETTING FAHRENHEIT OR CELSIUS
D. SETTING THE TIME
E. CHILD PROOF
F. MANUAL MODE (handset)
G. DESIGNATED LOW FIRE AND HIGH FIRE
H. COUNTDOWN TIMER
I. MODES OF OPERATION
J. THERMOSTATIC MODE
K. PROGRAM MODE
L. AUXILIARY FEATURE
M. ECO MODE
MANUAL TURN OFF
CLEANING AND MAINTENANCE
Installation instructions
GAS CONNECTION
VENTILATION
APPLIANCE INSTALLATION
FLUE CONNECTION
A. GENERAL NOTES
B. TIMBER FRAME CONSTRUCTION
C. CARPORT OR BUILDING EXTENSION
D. BASEMENTS, LIGHTWELLS AND RETAINING WALLS
E. TERMINAL LOCATIONS
F. HORIZONTAL WALL VENT TERMINATION TYPE C11
G. VERTICAL ROOF VENT TERMINATION C31
H. FLUE RESTICTOR IDENTIFICATION
FUEL BED ARRANGEMENTS
A. FIREBOX ACCESS
B. LOG LAY NATURAL
C. LOG LAY LPG
COMMISSIONING THE APPLIANCE
A. PILOT IGNITION CHECK
B. MAIN BURNER CHECK
C. PRESSURE CHECK
Servicing
CLEANING THE CERAMICS
SERVICING THE BURNER
SPARE PARTS
Technical Information
COUNTRIES OF USE
TECHNICAL DATA
DIMENSIONS
Appendix
MERTIK FAULT FINDING CHART
WIRING DIAGRAM
DECLARATION OF CONFORMITY
02
03
 03
 03
 03
 08
 08
09
 09
 09
 09
 09
 12
 15
16
 16
 16
 16
17
 17
 18
 19
20
20
 24
 25
03
EMERGENCY GAS ISOLATION
In the event of a gas leak or if gas is smelt, the appliance must be isolated.
This is done by turning OFF the gas at the Isolation Tap. This Isolation Tap
is located in the foot of the appliance, at the rear.
FIRST TIME OF OPERATION
Before igniting the appliance, ensure that all packaging, safety stickers
and any protective wrapping have been removed, and that the glass has
been cleaned, including all fingerprints from the glass.
Ensure that the room is adequately ventilated the first time that the
appliance is ignited; we would recommend opening windows if possible.
Run the appliance at full setting for a few hours so that the paint gets an
opportunity to fully cure. During this period it is possible for some fumes
and vapours to be given off. We would recommend keeping children and
pets out of the area at this time.
OPERATING INSTRUCTIONS
A. GENERAL NOTES
Wiring of valve and receiver must be completed before starting ignition.
Failure to do so could damage the electronics.
NOTICE
Batteries – Handset
· Low battery indicator on handsets.
Batteries – Receiver
· Low battery indication: frequent beeps for 3 seconds when motor turns.
· An AC mains adapter may be used instead of batteries.
· The module for fan speed control and light/dimmer includes mains
power together with batteries in the receiver for automatic backup in
case of power outage.
· Without using a mains adapter, battery replacement is recommended
at the beginning of each heating season.
· Old or dead batteries should be removed immediately. If left in the unit
the batteries can overheat, leak, and / or explode.
· Do NOT expose batteries (including during storage) to direct
sunlight, excessive heat, fire, moisture, or severe impact. Each of these
conditions can cause the batteries to overheat, leak, and / or explode.
· Batteries must be kept within their recommended temperature limits.
(Ambient battery temperature range: 32 °F to 131 °F [0 °C to 55 °C].)
· New and old batteries and different brands of batteries should not be
used together. Mixing of various batteries can cause the batteries
to overheat, leak, and / or explode.
WARNING
Software Version
Press and buttons simultaneously. Software version is displayed.
Handset Model Number
Press and buttons simultaneously. Handset model number
is displayed.
Deactivate Functions
1. Install batteries. All icons are displayed and flashing.
2. While the icons are flashing, press the relevant function button and hold
for 10 sec.
3. The function icon will flash until deactivation is complete. Deactivation
is complete when the function icon and two horizontal bars are displayed.
NOTE: If a deactivated button is pressed, there is no function, and two
horizontal bars are displayed.
NOTE: Deactivation remains in effect after change of batteries.
Activate Functions
1. Install batteries. All icons are displayed and flashing.
2. To activate a function, press the relevant button and hold for 10 sec.
3. The function icon will continue to flash until activation is complete.
Activation is complete when the function icon is displayed.
The following Functions can be Deactivated / Activated
· CHILD PROOF
· PROGRAM MODE
· THERMOSTATIC MODE (also deactivates PROGRAM MODE)
· ECO MODE
· LIGHT / DIMMER OPERATION
· CIRCULATING FAN OPERATION
· AUXILIARY FEATURE
· COUNTDOWN TIMER
B. SETTING THE ELECTRONIC CODE (First time use only)
Radio Frequency Handset
A code is selected automatically for all Mertik Maxitrol electronics from
among 65,000 codes available. The receiver must be paired with the
handset.
The receiver has to learn the handset code:
Press and hold the receiver’s reset button until you hear two (2) beeps. After
the second, longer beep, release the reset button. Within the subsequent
20 seconds press the button on the handset until you hear two (2) short
beeps confirming the code is set.
NOTE: This is a one time setting only, and it is not required when changing
the batteries In the handset or receiver.
User instructions
Product specificaties
| Merk: | Focus |
| Categorie: | Haarden |
| Model: | SlimFocus |
Heb je hulp nodig?
Als je hulp nodig hebt met Focus SlimFocus stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Haarden Focus
12 December 2023
Handleiding Haarden
- Haarden Quigg
- Haarden Altech
- Haarden Austroflamm
- Haarden Barbas
- Haarden Barbecook
- Haarden Bellfires
- Haarden Big Fire
- Haarden Blackline
- Haarden Blumfeldt
- Haarden Bocal
- Haarden Boley
- Haarden Brula
- Haarden Brunner
- Haarden Dimplex
- Haarden Dovre
- Haarden DRU
- Haarden Edilkamin
- Haarden El Fuego
- Haarden Element4
- Haarden Eurom
- Haarden Faber
- Haarden Franco Belge
- Haarden Global Fires
- Haarden Godin
- Haarden Haas-Sohn
- Haarden Hergom
- Haarden Hwam
- Haarden Icon Fires
- Haarden Italiana Camini
- Haarden K-Stove
- Haarden Kago
- Haarden Kalfire
- Haarden Klarstein
- Haarden Landmann
- Haarden Livin Flame
- Haarden M-design
- Haarden Manor House
- Haarden Mondena
- Haarden Napoleon
- Haarden Norsk Kleber
- Haarden Perel
- Haarden Qlima
- Haarden Rowi
- Haarden Ruby Fires
- Haarden Saey
- Haarden Spartherm
- Haarden Stuv
- Haarden Tel Sell
- Haarden Thermocet
- Haarden Thermorossi
- Haarden Toolland
- Haarden Wamsler
- Haarden Wanders
- Haarden Well Straler
- Haarden Wiking
- Haarden Xaralyn
- Haarden JAcobus
- Haarden Jydepejsen
- Haarden Olsberg
- Haarden OneConcept
- Haarden Oxford
- Haarden Create
- Haarden Amantii
- Haarden Charlton Jenrick
- Haarden Classic Fire
- Haarden Cosi
- Haarden Bartz
- Haarden Camina-Schmid
- Haarden Cera-Design
- Haarden Color
- Haarden Greithwald
- Haarden Hurdley
- Haarden Kanuk
- Haarden Outr
- Haarden Redfire
Nieuwste handleidingen voor Haarden
22 Februari 2025
7 Maart 2025
16 Februari 2025
22 Februari 2025
14 Februari 2025
14 Februari 2025
7 Maart 2025
31 Januari 2025
22 Februari 2025
31 Januari 2025