Fibaro FGBHFS-101 Handleiding

Fibaro Smarth home FGBHFS-101

Lees hieronder de 📖 handleiding in het Nederlandse voor Fibaro FGBHFS-101 (13 pagina's) in de categorie Smarth home. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/13

CONTENTS

#1: Description and features 3

#2: Powering the accessory 4

#3: Pairing the accessory 5

#4: Physical installation 6

#5: Reset 7

#6: Functionalities 8

#7: Congurable parameters 9

#8: Specications 10

#9: Regulations 11

FIBARO FLOOD SENSOR

FGBHFS-101

O P E R A T I N G

M A N U A L

v1.1

Important safety information

Read this manual before attempting to install the device!

Failure to observe recommendations included in this manual

may be dangerous or cause a violation of the law. The manufacturer,

Fibar Group S.A. will not be held responsible for any loss or damage

resulting from not following the instructions of operating manual.

HomeKit technology

Apple HomeKit technology provides an easy, secure way to control

HomeKit-enabled accessories using Siri on your iPhone, iPad, or iPod

touch.

After installing your FIBARO Flood Sensor, congure it from a

compatible app with just a few simple steps.

You can even create your own custom scenes to control your home

settings. For example, you can create a scene to automatically turn

o the lights, lock your doors, close the garage door, and set the

thermostat to the desired temperature in just one step.

To control this HomeKit-enabled accessory, iOS 9.3.5 or later is

recommended.

Controlling this HomeKit-enabled accessory automatically and

away from home requires an Apple TV with tvOS 9.2 or later or

an iPad with iOS 9.3 or later set up as a home hub.

DESCRIPTION AND FEATURES

Main features of FIBARO Flood Sensor:

• compatible with Apple HomeKit technology

• Bluetooth® low energy technology for wireless communication

• detects ooding

• detects tampering using accelerometer or when the casing is opened

• easy installation - simply put on a surface prone to ooding

• may be installed anywhere - sensor can be extended using

an external probe (not included)

• battery powered

• indicates state using LED diode and buzzer

FIBARO Flood Sensor is a HomeKit-enabled water sensor using

Bluetooth® low energy technology.

Along with detecting ooding, the accessory measures the ambient

temperature.

Tampering is detected whenever the accessory is moved or casing is

opened.

Built-in LED indicator and an acoustic alarm signal ooding and

tampering. The LED can be also used to identify the accessory.

The accessory is designed to be placed on the oor or mounted on a

wall (in this case sensor should be extended using an external probe).

The accessory is sink-proof, which means it drifts on the water surface

and keeps on sending alarm signal in case of substantial inundation

of water.

#1: Description and features

Product specificaties

Merk:	Fibaro
Categorie:	Smarth home
Model:	FGBHFS-101
Kleur van het product:	Wit
Breedte:	72 mm
Diepte:	28 mm
Hoogte:	72 mm
Stroombron:	DC
Connectiviteitstechnologie:	Draadloos
Diameter:	72 mm
Type stroombron:	DC
Accu/Batterij voltage:	3 V
Ondersteund aantal accu's/batterijen:	1
Interface:	Bluetooth
Frequentie:	2400 MHz
Maximale afstand:	50 m
Draadloze technologie:	Bluetooth
Bedrijfstemperatuur (T-T):	0 - 40 °C
Type batterij:	CR123A