Festo VSNC Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Festo VSNC (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Translation of the original instructions
© 2021 all rights reserved to Festo SE & Co. KG
1 Applicable Documents
All available documents for the product www.festo.com/sp.è
2 Safety
2.1 Safety instructions
– Before working on the product, switch off the power supply and secure it
against being switched on again.
2.2 Intended use
The solenoid valve is intended for mounting on a drive with a NAMUR plug pattern
in accordance with VDI/VDE3845 Sheet1:2010-09.
3 Additional information
– Accessories www.festo.com/catalogue.è
4 Product overview
4.1 Included in scope of delivery
VSNC-F...-M52-...-P2
1Basic valve (1x)
single solenoid,
5/2 or 3/2
2Screw (2x)
3O-ring 3x1 (2x)
4O-ring 16x2 (1x)
5Sheet metal seal (1x)
6Coding pin (1x)
Fig. 1 VSNC-F...-M52-...-P2
VSNC-F...-B52-...-P2
1Basic valve (1x)
double solenoid 5/2
2Screw (2x)
3O-ring 3x1 (4x)
4O-ring 16x2 (2x)
6Coding pin (1x)
Fig. 2 VSNC-F...-B52-...-P2
VSNC-F...-P53...-...-P2
1Basic valve (1x)
double solenoid 5/3
2Screw (2x)
3O-ring 3x1 (4x)
4O-ring 16x2 (2x)
6Coding pin (1x)
Fig. 3 VSNC-F...-P53...-...-P2
4.2 Not in scope of delivery
Pilot valve
7Pilot valve (1x)
MGXDH-3/2-1.2-…-EX,
MGXIAH-3/2-0.8-24DC-EX
8Screw (2x)
M4x35
Fig. 4
Connector
9Connector (1x)
VABF-B14-P1-G18,
VABF-B14-P1-N18
10 Screw (2x)
M4x16
Fig. 5
5 Preassembly
Fig. 6
• Press O-rings into the recesses[A].3
5.1 With electrical control
Fig. 7
1. Place pilot valves on the basic valve .7 1
2. Tighten screws . Tightening torque:1.4Nm±10%8
5.2 With pneumatic control
Fig. 8
1. Place the connectors on the basic valve .9 1
2. Tighten screws . Tightening torque:1.4Nm±10%aJ
8149698
VSNC-F...-M52/-B52/-P53...-...-P2
Solenoid valve
8149698
2021-01
[8149700]
Assembly instructions
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
6 Assembly
Requirement for outdoor application:
Protection against sealing of exhaust ducts 3/5 e.g.by frozen condensate or nest-
ing insects.
1. Take on-site environmental conditions into account.
2. Take suitable protective measures. For example:
– Use exhaust protection VABD-D3-SN-G14.
– Duct exhaust air.
The orientation of the basic valve depends on the position of the coding1
pin . The position of the coding pin determines the direction of movement at6 6
the drive.
6.1 VSNC-F...-M52-...-P2
Fig. 9 Valve function 5/2
Fig. 10 Valve function 3/2
1. Press O-ring into the recess[C].4
2. Orient the sheet metal seal in accordance with the desired valve function.5
3. Press sheet metal seal into the recess[D].5
6.2 VSNC-F...-B52/-P53...-...-P2
Fig. 11
• Press O-rings into the recesses[B].4
6.3 Mounting on the drive
Fig. 12
1. Position coding pin on the thread[E]/[F] in accordance with the desired6
direction of movement.
2. Screw coding pin into the thread[E]/[F] to the stop.6
Fig. 13
• Place coding recess[G] on the coding pin .6
Fig. 14
• Tighten screws . Tightening torque: 3.5Nm±20%2
7 Circuit diagrams
VSNC-F...-...-P2
-M52- (single solenoid 5/2) -M52- (single solenoid 3/2)
-B52- -P53C-
-P53E- -P53U-
Tab. 1


Product specificaties

Merk: Festo
Categorie: Niet gecategoriseerd
Model: VSNC

Heb je hulp nodig?

Als je hulp nodig hebt met Festo VSNC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Festo

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd