Ferm GGM1001 Handleiding

Ferm Lijmpistool GGM1001

Lees hieronder de 📖 handleiding in het Nederlandse voor Ferm GGM1001 (64 pagina's) in de categorie Lijmpistool. Deze handleiding was nuttig voor 80 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/64
© 2009 Ferm B.V. 0912-16
www.ferm.com
ELECTRICAL GLUE GUN
GGM1001
EN Original instructions 02
DE Übersetzung der
Originalbetriebsanleitung 05
NL Vertaling van de oorspronkelijke
gebruiksaanwijzing 08
FR Traduction de la notice originale 11
ES Traducción del manual original 14
PT Tradução do manual original 17
IT Traduzione delle istruzioni
originali 20
SV Översättning av bruksanvisning
i original 23
FI Alkuperäisten ohjeiden käännös 26
NO Oversatt fra orginal veiledning 29
DA Oversættelse af den originale
brugsanvisning 32
HU Eredeti használati utasítás
fordítása 35
CS Překlad püvodního návodu k
používání 38
SL Preklad pôvodného návodu na
použitie 41
PL Tłumaczenie instrukcji
oryginalnej 44
LT Originalios instrukcijos vertimas 47
LV Instrukciju tulkojums no
oriģinālvalodas 50
RU Перевод исходных инструкций 53
UA Переклад оригінальних
інструкцій 56
EL Μετάφραση του πρωτοτύπου
των οδηγιών χρήσης 59
2
EN
ELECTRICAL GLUE GUN
GGM1001
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe’s leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Contents
1. Machine information
2. Safety instructions
3. Operation
4. Service & maintenance
1. MACHINE INFORMATION
Technical specications
Voltage 110 - 230 V~
Frequency 50 Hz
Power input 16 (65) W
Diameter glue stick 12 mm
Weight ca. 0.24 kg
Contents of the package
1 Glue gun
6 Glue sticks
1 Kit
1 Manual
1 Safety instructions
1 Guarantee card
Check the machine, loose parts and accessories
for transport damage.
2. SAFETY INSTRUCTIONS
Explanation of symbols
Read the instructions carefully
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in
this manual.
Indicates the presence of an electrical
voltage.
Immediately unplug the plug from the
mains electricity in the case that the cord
gets damaged and during maintenance.
Specific safety instructions
Before operating the glue gun:
• Check the following points:
• Do the voltage of glue gun correspond to
the mains voltage.
• Are the mains lead and the mains plug in a
good condition: solid, without any loose
ends or damage.
• Mount the bracket before plugging in the tool.
• As hot glue can cause burns, avoid contact.
• Always allow the gun to cool down by itself.
• Never immerse the tool in water.
Immediately unplug the glue gun in case of:
• The glue gun is overheated.
• Malfunction of the mains plug, -socket or
damaged cables.
• Broken switch.
• Smoke or smell caused by scorched
insulation.
Electrical safety
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of re, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
3
EN
Always check that the power supply
corresponds to the voltage on the rating
plate.
Class ll machine. Your machine is double
insulated; therefore no earthwire is
required.
Replacing cables or plugs
Immediately throw away old cables or plugs when
they have been replaced by new ones. It is
dangerous to insert the plug of a loose cable in
the wall outlet.
Using extension cables
Only use an approved extension cable suitable
for the power input of the machine. The minimum
conductor size is 1.5 mm2. When using a cable
reel always unwind the reel completely.
3. OPERATION
Always observe the safety instructions
and applicable regulations.
This glue gun (kit) has been especially designed
for glueing products such as wood, plastic, foam,
rubber, fabric, cardboard, tiles, ceramics, etc.
Quickly setting, the glue is perfect for repairing
carpets, bookbinding, xing soles, etc. The glue is
waterproof and resistant to the action of many
liquids. The glue gun is quick, environmentally-
friendly, energy-saving and together with the glue
facilitates and quickens any job.
Due operating the glow gun
• The normal setting time of the hot glue is 30
seconds. After 30 seconds the glue starts to
set. Having applied the glue on the relevant
surfaces, wait 15 - 20 seconds before joining
them.
After about 1 minute the joint has reached
90% of its adhesive strength.
• The setting time can be extended to 50 to 60
seconds by applying the glue in thick drops or
shortened by applying the glue in short, ne
lines.
• Joining large surfaces is difcult, as the glue
tends to set before the entire surface has been
covered with glue.
• Preheating the surfaces to be joined
guarantees a strong joint. Sun rays have the
same impact.
• The glue melts from a temperature of approx.
140°C and must never be used on material
that is sensitive to heat.
• The glue gun can be used to replace nails,
paper tape, liquid glue, but not for heavy-duty
jobs.
• The electric glue gun features accurate
temperature control. It is tted with a special
design feed system that ensures no glue is left
behind inside the mechanism.
• The glue gun requires Ø 12mm glue
cartridges.
• The glue gun comes standard with a bracket
that enables you to put the gun safely on the
table when it is not used.
Operation
• Plug in the tool.
• Insert a glue cartridge into the gun, two when
using it for the rst time.
• Wait 5 minutes for the glue to heat.
• Squeeze the trigger to release the glue.
• Replace the glue cartridge as soon as you
notice little if any glue is released from the
gun.
• Disconnect the tool if you do not intend to use
it for some time.
Replacing the nozzle
• Loosen the orange nozzle. If it does not come
easy, use the spanner provided.
• Fit the nozzle on the glue gun. Tightly secure
with the spanner.
Before removing the nozzle, allow the
glue gun to cool down completely to
avoid injuries. Always disconnect the
tool.
4. SERVICE AND
MAINTENANCE
Make sure that the machine is not live
when carrying out maintenance work on
the motor.
This machine has been designed to operate over
a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper machine care and regular
cleaning.

Product specificaties

Merk: Ferm
Categorie: Lijmpistool
Model: GGM1001

Heb je hulp nodig?

Als je hulp nodig hebt met Ferm GGM1001 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Lijmpistool Ferm

Ferm

Ferm GGM1001 Handleiding

30 Maart 2023
Ferm

Ferm GGM1004 Handleiding

26 Maart 2023
Ferm

Ferm GGM1002 Handleiding

23 Januari 2023

Handleiding Lijmpistool

Nieuwste handleidingen voor Lijmpistool

Milwaukee

Milwaukee M12 GG Handleiding

19 November 2024
Metabo

Metabo KE 3000 Handleiding

15 November 2024
MSW

MSW -AAH-01 Handleiding

16 Oktober 2024
Einhell

Einhell BT-GG 30 K Handleiding

6 September 2024
Einhell

Einhell BT-GG 200 Handleiding

10 Juli 2024
Hazet

Hazet 9042N-1 Handleiding

18 Juni 2024
Hazet

Hazet 2162-2 Handleiding

18 Juni 2024
DeWalt

DeWalt DWHTGR50 Handleiding

10 Juni 2024
Hikoki

Hikoki AL 18DA Handleiding

27 Mei 2024
Duro Pro

Duro Pro D-AK 3,6/1 Li Handleiding

7 Mei 2024