Ferm FHG-2000 Handleiding
Ferm
Hittepistool
FHG-2000
Lees hieronder de 📖 handleiding in het Nederlandse voor Ferm FHG-2000 (4 pagina's) in de categorie Hittepistool. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/4
Ferm • P.O. Box 134 • 8280 AC Genemuiden • NL • Web: www.ferm.com 0208/30
Ferm Hot-Air Gun
FHG-2000(K)
USER’S MANUAL
Art.nr. 785700
Art.nr. 785705
Screwfix art.nr: 12296
UK Subject to change
Ferm 7
FERM HOT-AIR GUN FHG-2000(K)
USERS MANUAL
TECHNICAL SPECIFICATIONS
PRODUCT INFORMATION
1 Hot-air gun
4 Mouthpieces
1 Paint scraper
1 Users manual
1 Garanty card
ELECTRICAL INFORMATION
This product is complete with a pre-wired mains plug. If
the plug needs replacing follow these instructions.
Wire correctly
The wires in the mains lead are coloured in the following
way:
BLUE -Neutral
BROWN -Live
GREEN/YELLOW -Earth
Secure wires
Secure wires carefully and firmly to the correct termi-
nals. Secure the mains cable in the plug cord grip firmly
Fit a 13 amp fuse. If a 13amp (BS1363) plug is used a (BS
1362) ASTA approved 13-amp fuse must be fitted.
Recycle/Dispose of old plug and cable
Prevent inadvertent connection to socket and risk of
electric shock.
If in doubt always consult a Qualified Electrician
SAFETY INSTRUCTIONS
The following pictograms are used in these instructions
for use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of the
instructions in this manual.
Denotes risk of electric shock.
Denotes risk of fire.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
Ferm products are manufactured to high quality stan-
dards they are safe and fit for purpose at time of sale, but
all tools can be dangerous if the correct precautions are
not taken. Always follow these instructions, do not carry
out the operation until you are sure you can do so in saf-
ety. Remember to consider the work environment for
safe operation as well as safety for tool use.
Warning! When using electric tools, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury. Read all
these instructions before attempting to operate this product.
Save these instructions for future reference.
PERSONAL SAFETY
Use Personal Protection Safety Equipment
Protect eyes with safety glasses or goggles note: the use
of safety protective eyewear without the CE mark can
lead to serious injury if the glass breaks. A suitable dust
mask should be worn if cutting, drilling or sanding is
dusty, in particular chipboard or MDF. Approved safety
footwear and headgear should worn as appropriate, for
example on building works or when heavy weights are
involved.
Dress properly
Do not wear loose clothing or jewellery. It can get caught
in moving parts. Non-skid footwear is recommended
when working out doors. Wear protective hair covering
to contain long hair.
Stay alert
Watch what you are doing Use common sense. Do not
operate tools when tired or after taking alcohol or pre-
scription/ non-prescription drugs.
Blue
(Neutral)
Green & Yellow
(Earth)
Brown
(Live)
Fuse
(5 Amp)
Voltage | 230 V ~
Frequency | 50 Hz
Power input | 2000 W
Heat capacity position 1 | 320°C/
| 500 l/min
Heat capacity position 1 | 580 °C/
| 650 l/min
2Ferm
SPARE PARTS FHG-2000(K)
REF.NR. DESCRIPTION FERM NR.
1 ENCLOSURE (COMPLETE) 104080
2 METAL FRAME FOR ELEMENT SUUPORT 104081
3 FAN MOTOR 104082
4 HEATING ELEMENT 104083
5 SWITCH 104084
6 CAPACITOR 0,1µF 104085
EXPLODED VIEW
6Ferm
OPERATIONAL SAFETY
Warning! The hot air gun operates at a tempera-
ture of 580 degrees without visible signs of heat. Be
careful: the hot air stream and the mouthpiece are very hot
and can cause burns.
Be aware that the hot air stream is a fire risk although no fla-
mes are visible. Do not touch the mouthpiece or point it at
yourself.
Do not leave the hot air gun unattended when switched on.
Do not use for drying hair, animals or on any living thing.
Keep the hot air gun away from children and animals
Do not use the hot air gun in a bath, near water or inflamma-
ble liquids.
Concentrate
Routine and repetition can lead to mistakes. Remember
that a slight lack of concentration can result in serious
injuries in a split second.
Keep work area clean
Cluttered areas and benches invite injuries
Consider the work environment
Do not expose power tools to rain or use them in damp
or wet locations. Keep work area well lit. Do not use
power tools in the presence of flammable liquids, vap-
ours or gases.
Guard against electric shock
This unit contains dangerous voltages. Use a RCD (resi-
dual current device) to provide protection against elec-
trical shock. Prevent body contact with grounded sur-
faces (e.g. pipes, radiator, ranges or refrigerators).
Keep children and pets away
Do not let children or pets come into contact with the
tool, extension cable or work area.
Do not force the tool
It will work better and safer at the rate for which it was
intended.
Use the right tool
Do not force small tools or attachments to do the job of a
heavy-duty tool. Do not use tools for purposes for which
they were not intended; for example do not use a circular
saw for cutting trees or logs.
Do not abuse cable
Never carry the tool by the cable or pull it to disconnect
it from the power socket. Keep the cable away from heat,
oil and sharp edges. Do not touch the metal plug pins
when connecting or removing the plug.
Secure Work
Use clamps or a vice to hold work. It is safer than using
your hand and it frees both hands to operate the tool.
Do not over-reach
Keep a proper footing and balance at all times.
Disconnect tools from power supply
When not in use, before servicing and when changing
accessories such as blades, bits and cutters. Always
switch off and unplug the hot air gun from the power sup-
ply before making adjustments or changing nozzles.
Remove adjusting keys and wrenches
Ensure that they are removed from the tool before swit-
ching on.
Avoid unintentional starting
Do not carry plugged in tools with your finger on the
switch. Check that the switch is off before plugging in to
socket.
Extension cables
Use only three core earthed extension cables suitable
for the power input of the tool (minimum cable size
1.5mm2). Plug into an earthed socket only.
When using a cable reel unwind it fully. Do not use long
extension cables.
Outdoors use
If the tool is suitable to be used outdoors, only use an
extension cable intended for outdoor use and marked
accordingly. Use a RCD (residual current device) to pro-
vide protection against electrical shock. Do not use in
rain or damp conditions.
Connect a dust extraction device
Whenever there are facilities for fitting a dust of fume
extraction system, make sure it is connected and used.
Use recommended accessories
The use of any other accessory or attachment other than
recommended in the instructions or catalogue may pre-
sent a risk of personal injury. Do not use long extension
cables with the hot air gun.
USING THE HOT AIR GUN
- Before operating check the voltage on the hot air gun
corresponds with your power supply voltage and
that the plug and lead are in good condition.
- Check that the switch is in position"0"
- Attach the adaptor (if supplied) to the nozzle before
switching on.
- Operation Plug into a suitable mains supply and
switch on.
- To switch ON put the switch on the hot air gun to
position:
- "I" for lower heat and air flow – 320 degrees/500
litres air per minute
- "II" for higher heat and air flow – 580 degrees/ 650
litres air per minute
- The hot air gun can be used either hand held or free-
standing with the stand set at 90 degrees to the
handle.
- To switch OFF put the switch in position "O"
- To determine suitability or find the best heat setting,
test on a piece of scrap or small area of the work
piece that will not be seen. Start off at position "I" low
setting.
Ferm 3
Product specificaties
| Merk: | Ferm |
| Categorie: | Hittepistool |
| Model: | FHG-2000 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ferm FHG-2000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Hittepistool Ferm
9 Mei 2023
20 April 2023
18 April 2023
1 Maart 2023
13 Januari 2023
19 November 2022
11 Oktober 2022
Handleiding Hittepistool
- Hittepistool Bosch
- Hittepistool Panasonic
- Hittepistool AEG
- Hittepistool DeWalt
- Hittepistool Argo
- Hittepistool Bavaria
- Hittepistool Einhell
- Hittepistool G3 Ferrari
- Hittepistool Gude
- Hittepistool Hikoki
- Hittepistool Hitachi
- Hittepistool Holzmann
- Hittepistool Kress
- Hittepistool Makita
- Hittepistool Metabo
- Hittepistool Milwaukee
- Hittepistool Parkside
- Hittepistool Powerplus
- Hittepistool Qlima
- Hittepistool Ryobi
- Hittepistool Skil
- Hittepistool Stanley
- Hittepistool Steinel
- Hittepistool Trotec
- Hittepistool Vonroc
- Hittepistool Wagner
- Hittepistool Weller
- Hittepistool Jocel
- Hittepistool Ozito
- Hittepistool Black And Decker
- Hittepistool Steren
- Hittepistool Meec Tools
- Hittepistool Rapid
- Hittepistool Genesis
- Hittepistool Fieldmann
- Hittepistool Proxxon
- Hittepistool Porter-Cable
- Hittepistool MSW
- Hittepistool Craftsman
- Hittepistool Alpha Tools
- Hittepistool Hazet
- Hittepistool Meister Craft
- Hittepistool Wagner SprayTech
- Hittepistool Challenge Xtreme
- Hittepistool Einhell Bavaria
- Hittepistool Bavaria By Einhell
Nieuwste handleidingen voor Hittepistool
5 December 2024
4 December 2024
1 December 2024
19 November 2024
19 November 2024
17 November 2024
16 Oktober 2024
17 Juni 2024
10 April 2024
10 April 2024