Ferm CRM1005 FC-710 Handleiding
Ferm
Compressor
CRM1005 FC-710
Lees hieronder de đź“– handleiding in het Nederlandse voor Ferm CRM1005 FC-710 (10 pagina's) in de categorie Compressor. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/10
Ferm B.V. • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com 0208/27
Ferm FC-710
Compressor
Kompressor
Compressor
Compresseur
Compresor
Kompressor
Kompressori
Kompressor
Kompressor
äÓÏÔÂÒÒÓ
USERS MANUAL
GEBRAUCHSANWEISUNG
GEBRUIKSAANWIJZING
MODE D’EMPLOI
MODEO DE EMPLEO
BRUKSANVISNING
KĂ„YTTĂ–OHJE
BRUKSANVISNING
BRUGER VEJLEDNING
êìäéÇéÑëĂÇé èé ùäëèãìÄĂÄñà Ă
Art.nr. 231710
Ferm 192 Ferm
Product: Ferm Compressor
Type FC-710, Art. nr. 231710
Ferm, Genemuiden, The Netherlands
1. TECHNICAL DATA
This is a directly linked 1-cylinder compressor in mobile
design. This compressor is also equipped with a reducing
valve, a automatic shutdown and a quick coupling.
Sound pressure level 83,8 dB(A)
CAREFULLY READ THE INSTRUCTIONS
BEFORE YOU USE THE COMPRESSOR!
2. SPECIFIC SAFETY RULES
BEFORE USING THE COMPRESSOR:
1. Place the compressor in a well ventilated, frost
free area.
To obtain sufficient ventilation and cooling the distan-
ce between the shield and the wall needs to be at least
50 to 60 cm.
2. The following points need to be checked:
- do the voltage of the engine and the engine safe
guard, if any, correspond to the mains voltage (ap-
pliances for a mains voltage of 230 V can be connec-
ted to a mains voltage of 220 V without any pro-
blems);
- an earthed mains connection (wall socket) needs
to be used;
- are the mains lead and the mains plug in a good con-
dition: solid, without any loose ends or damage;
- the pressure reducing valve may not be copletely
closed so as to prevent damage to membranes;
- the oil level with help from the gauge. The oil level
should be within the area indicated by both marks
on the gauge, when the compressor is placed level.
- before use the air tank needs to be empty.
IMPORTANT: To prevent damage to the motor
windings as a result of voltage variation it is advisable
to mount an engine safety switch.
WHILE USING THE COMPRESSOR:
1. Do not use extension cables which are too long.
IMMEDIATELY SWITCH OFF THE COMPRES-
SOR IN CASE OF:
1. defective mains plug, mains line or damage to the
mains line;
2. defective switch;
3. smoke or bad smell caused by scorched insulation.
3. INSTALLATION
The compressor needs to be placed in well-ventilated,
frost-free area. To obtain sufficient ventilation and coo-
ling the distance between the shield and the wall needs to
be at least 50 to 60 cm.
4. OPERATING THE COMPRESSOR
- The mains switch needs to be in “OFF” or “0” posi-
tion before the mains plug is connected to the mains
voltage.
- Bij switching the switch to “ON” or “1” the compres-
sor will operate.
- Always keep the mains lead away from moving parts
of any linked up air-pressure equipment.
- With the use of the reducing valve it is possible to ad-
just the air pressure by hand. By pressing the reducing
valve the chosen position can be locked. However, do
not close the reducing valve too much, in order to
prevent damage to the membranes.
5. MAINTENANCE
The mains plug always needs to be taken out
of the socket (the mains socket) during main-
tenance or cleaning activities. Never use wa-
ter or other agressive liquids to clean the ma-
chine. Clean the machine by brushing it with
a brush.
PERIODIC MAINTENANCE OF THE COMPRES-
SOR WILL PREVENT UNNECESSARY PROBLEMS!
Oillevel
The compressor comes with a special test oil, that must
be Replaced after about 100 hours of use. Check the oil
level from time to time, using the oil gauge.
When the compressor is level and has not been used for
some time, the oil level should be within the area indica-
ted by both marks on the gauge. The oil must be replaced
after every 1000 hours of use. Use compressor oil API
CC SAE 40 rather than motor oil. If the compressor is
!
GB English
Art.
nr. Type
V~/Hz W RPM LTR. L/MIN BAR
231710 FC-710 230~50 1.500 2.800 50 245 8
1'
Exploded
view 2
FC-710
AVAILABLE SPARE PARTS FOR FC-710
REF.NR. DESCRIPTION FERM NR.
1 CYLINDER COVER (RED) 208217
2 REAR COVER 208200
3 COVER 208201
6 VALVE PLATE 208252
7 FAN 208202
9 OIL LEVEL GAUGE 208203
11 CRANKSHAFT + AXLE 208204
8223091 CONNECTION ROD COMPLETE 208205
21 CONDENSOR 25 uF 800025
23 CYLINDER 208210
24 CYLINDER HEAD PACKING 208211
26 GASKET VALVE PLATE HEAD 208212
27 HEAD 208213
29 FILTER 205730
30 STATOR 208221
31 ROTOR 208222
32 CYLINDER PACKING 208216
Ferm 3
used in temperatures below 0°C, use API CC SAE 20 oil.
Every month:
Clean the air filter.
Every 1,000 working hours:
Refresh the oil
Carefully clean the outside of both the compressor
and the engine, to ensure an efficient cooling.
Condensation :
Regularly, i.e. several times a week, drain condensa-
tion from the air chamber, using the drain cock situa-
ted on the underneath of the air chamber.
Have your tool repaired by an expert!
This electric appliance is in accordance with the rele-
vant safety rules. Repairing of electric appliances may
be carried out only by experts other wise it may cause
considerable danger for the user.
We declare under our sole responsability that this
product is in conformity with the following
standards or standardized documents
prEN1012-1, EN60204-1, EN292, ISO5388
EN550014, EN55104, EN61000-3-2, EN61000-3-3
in accordance with the regulations:
89/392/EEC - 91/368/EEC
93/44/EEC - 93/68/EEC
73/23EEC - 89/336/EEC - 92/31/EEC
from 01-04-1999
GENEMUIDEN NL
G.M. Ensing
Quality department
Produkt: Ferm Kompressor
Typ FC-710, Art.nr. 231710
Ferm, Genemuiden, die Niederlände
1. TECHNISCHE DATEN
Es handelt sich hierbei um ein direkt gekoppelter 1-Zylin-
der Kompressor in mobiler AusfĂĽhrung. Diese Kom-
pressor ist auĂźerdem mit einem Druckreduzierventil, ei-
nem automatischen Ausschalter und einer Schnellkup-
plung ausgestattet.
Schalldruckpegel 83,8 dB(A)
LESEN SIE DIESE GEBRAUCHSANWEI-
SUNG GUT DURCH, BEVOR SIE DEN KOM-
PRESSOR BENUTZEN.
2. SPEZIELLE
SICHERHEITSVORSCHRIFTEN
BEVOR INGEBRAUCHNAHME DER KOM-
PRESSOR:
1. Stellen Sie den Kompressor in einem gut gelĂĽf-
teten, frostfreien Raum.
FĂĽr eine optimale Ventilation und KĂĽhlung muĂź der
Abstand zwischen Schutzkappe und Wand min-
destens 50 bis 60 cm betragen.
2. Kontrollieren Sie folgendes:
- stimmt die AnschluĂźspannung des Motors und
eventuell der Motorsicherung mit der Netzspan-
nung ĂĽberein (Maschinen fĂĽr eine Netzspannung
von 230 V können problemlos an eine Netzspan-
nung von 220 V angeschlossen werden);
- benutzen Sie einen geerdeten NetzanschluĂź.
- sind Netzkabel und Netzstecker in gutem Zu-
stand: stabil und ohne Knicke oder Beschädigun-
gen;
- Vermeiden Sie zu lange Verlängerungskabel.
- um Schäden an den Membranen zu vermeiden,
darf das Druckreduzierventil nicht völlig geschlos-
sen sein;
- Der Ă–lstand mittels der Ă–lstandmesser. Das Ă–l
soll zwischen den beiden Markierungen auf dem
Ă–lstandsmesser stehen, wenn der Kompressor
horizontal aufgestellt ist.
- vor Inbetriebnahme mĂĽssen der LuftverschluĂź ge-
schlossen und der Lufttank leer sein.
WICHTIG: Um zu vermeiden, daĂź Spannungssch-
wankungen Schaden an der Motorwicklung verursa-
chen, ist es empfehlenswert, einen Motorsicherungs-
schalter anzubringen.
Deutsch
D
CE
ı
DECLARATION OF CONFORMITY (UK)
18 Ferm
AVAILABLE SPARE PARTS FOR FC-710
REF.NR. DESCRIPTION FERM NR.
1 AUTOMATIC ON/OFF SWITCH 240018
2 PRESSURE GAUGE REAR 240100
3 PRESSURE REDUCER MICRO 205887
4 NO RETURN VALVE 1/2” M 205889
5 SAFETY VALVE 1/4” 8,5 BAR 205915
7 RILSAN TUBE 4/6 205902
8 WHEEL 125 MM 205896
9 DRAIN TAP 1/4” 205888
10 RUBBER SUPPORT H50X30 208114
13 CONNECTOR 0° 208219
14 AIR PRESS TUBE 208220
Exploded
view 1
FC-710
Product specificaties
| Merk: | Ferm |
| Categorie: | Compressor |
| Model: | CRM1005 FC-710 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ferm CRM1005 FC-710 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Compressor Ferm
19 April 2023
18 April 2023
15 April 2023
29 Maart 2023
23 Maart 2023
19 Maart 2023
18 Maart 2023
18 Maart 2023
14 Maart 2023
11 Februari 2023
Handleiding Compressor
- Compressor Bosch
- Compressor Xiaomi
- Compressor AEG
- Compressor DeWalt
- Compressor Airpress
- Compressor Bavaria
- Compressor Boss
- Compressor Danfoss
- Compressor Duro
- Compressor Duro Pro
- Compressor Einhell
- Compressor Emax
- Compressor Eufab
- Compressor Festool
- Compressor Global
- Compressor Gude
- Compressor Hikoki
- Compressor Hitachi
- Compressor Holzmann
- Compressor Hyundai
- Compressor Kibani
- Compressor Laica
- Compressor Livoo
- Compressor Makita
- Compressor Merlin
- Compressor Metabo
- Compressor Milwaukee
- Compressor Nilfisk
- Compressor Parkside
- Compressor Powerplus
- Compressor Robust
- Compressor Samson
- Compressor Scheppach
- Compressor Silvercrest
- Compressor Silverline
- Compressor Stanley
- Compressor Technaxx
- Compressor Toolcraft
- Compressor Topcraft
- Compressor Trotec
- Compressor Ultimate Speed
- Compressor Vonroc
- Compressor Westfalia
- Compressor WilTec
- Compressor Workzone
- Compressor Zipper
- Compressor OKAY
- Compressor Omnitronic
- Compressor Osram
- Compressor Ozito
- Compressor Black And Decker
- Compressor Steren
- Compressor Cocraft
- Compressor Draper
- Compressor Meec Tools
- Compressor Senco
- Compressor Hamron
- Compressor Aerotec
- Compressor Contimac
- Compressor HBM
- Compressor Power Craft
- Compressor Tacklife
- Compressor Truper
- Compressor Festo
- Compressor Fieldmann
- Compressor Biltema
- Compressor Porter-Cable
- Compressor Sun Joe
- Compressor Dedra
- Compressor CMI
- Compressor Herkules
- Compressor Bimar
- Compressor MSW
- Compressor Sthor
- Compressor Craftsman
- Compressor Alphacool
- Compressor Freeman
- Compressor Pretul
- Compressor Hazet
- Compressor Full Boar
- Compressor Yato
- Compressor Avantco
- Compressor Auto Joe
- Compressor Unimac
- Compressor PreSonus
- Compressor Carel
- Compressor Outbac
- Compressor Golden Age Project
- Compressor Eventide
- Compressor Abac
- Compressor DBX
- Compressor SPL
- Compressor Lindell Audio
- Compressor Arebos
- Compressor POWERNAIL
- Compressor Anova
- Compressor Pansam
- Compressor Narvon
- Compressor Airman
- Compressor Pro-Lift
- Compressor Aomni
- Compressor Numax
- Compressor TOOLMATE
- Compressor California Air Tools
- Compressor Ilsco
- Compressor Hulk Power
- Compressor Cartrend
- Compressor Prowork
- Compressor Proviel
- Compressor Creemers
- Compressor ExelAir
- Compressor TJM
- Compressor API Audio
- Compressor TAURUS Titanium
Nieuwste handleidingen voor Compressor
21 November 2024
20 November 2024
19 November 2024
15 November 2024
14 November 2024
20 Oktober 2024
15 Oktober 2024
15 Oktober 2024
6 September 2024
6 September 2024