Fenton RP168 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Fenton RP168 (21 pagina's) in de categorie Platenspeler. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/21
RP168 Series Record Player Set
Ref. nr.: 102.147; 102.149
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
V1.2
2
ENGLISH
Congratulations to the purchase of this Fenton product. Please read this manual thoroughly prior to using the unit in order to
benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the t time, firs
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore, do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and malfu tion. nc
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
n d to be replaced by a qualified technician. ee
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer. Do
NOT connect the unit to a rheostat or er. dimm
- To avoid fire and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualified technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a -16A fuse. 10
- During a thunders rm or if the unit will not be used for a to
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the unit in
humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guidelines and follow the instructions.
- Do not repeatedly switch the fixture on and off. This
shortens t lifetime. he
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a speci alist.
- Do not force the controls.
- This unit is with speaker inside which can cause
magnetic field. Keep this unit at least 60cm away from
computer or TV.
- If this product have a built-in lead-acid rechargeable
battery. Please recharge the battery every 3 mo if nths
you are not going to use the product for a long period of
time. Otherwise the battery may be permanently
damaged.
- If the battery is damaged please replace with same
specifications battery. And dispose the damaged battery
environment friendly.
- h it has fallen, always have it checked by a If t e un
qualified technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cau se
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit off prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
- Ma sure that the mains lead cannot be damaged when ke
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the co y is suitable for this unit. untr
- Keep the original packing material so that you can
transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient
magnit to cause a shock hazard. ude
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The unit has been certified CE. It is prohibited to make any changes to the unit. T y would invalidate the CE certificate and he
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F .
Electric products must not be put into household waste. se bring them to a recycling centre. Ask your local authorities or your Plea
dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Fenton cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations
and warnings. This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCT ION
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be
returned, it is important that the product is returned in the original factory box and packaging If the device has been exposed to .
drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might
damage your device. Leave the device switched off until it has reached room temperature.
OVERVIEW
1. T e arm Lever on
The fixed tonearm can be raised and lowered pressing the raise / lower
lever.
2. arm Tone
3. 33 / 45 / 78 RPM Switch
This switch controls the RPM of the turntable platter.
4. Autos p Switch ON/OFF to
This switch turns auto stop on or off. When the automatic stop is
enabled, the platform will start rotating as soon as the tone arm is placed
over the record and will stop rotating when it has reached the end of the
record. Some vinyl rec ds stop fore the end do not stop when the or be or
end is reached. In this case set Auto-stop to OFF.
5. Tone arm Clip
This clip secures the tonearm while at rest or when not in use.
6. Cartridge with Needle
When the turntable is not in use it is recommendable to place the ,
removable protection cover on the stylus.
7. Volume Control
Adjust the volume for the speakers.
8. LED Indicator
Indicator lights up when power turned on.
9. Mode
Select the BT or phono play function.
10. Platter
Place you record here. r
11. 45RPM Adapter
12. DC IN port
Connecting the 12Volt/DC power adaptor.
13. Line O put ut
The audio from a playing vinyl record is sent to this line-level coaxial audio output. This must not be connected to phono
level devices.
14. USB Port
Use the included USB cable to connect your turntable to your computer. The USB connection will send audio signal from t he
turntable to your computer.
OPERATION
1. Switch the fu tion mode (9) to PH. Turn on the power switch at the rear of the turntable player. The indicator will emit red nc
colou r.
2. Place a record on the turntable platter and select the desired speed (33/45/78R ) according to the record. PM
NOTE: when playing a 4 PM record, use the included 45RPM adapter located inside the accessories bag. 5R
3. Remove the stylus protector. Open the tone-arm clip to release the tone-arm. Push the lift lever backward to raise the tone-
arm and gently move the tone-arm to the desired pos ion over the record. The turntable will begin to spin when the arm is it
moved toward the record. Push the lift lever forward to lower the tone-arm slowly onto the desired position on the record to
begin playing the record.
NOTE: -The record will begin t spin only when the tone-arm is moved toward the record if the Auto Stop is turned on. o
- AUTO STOP function applies to most 33RPM vinyl records. However, for very few vinyl records, it will stop when it d id
not yet reach the end (in this case, turn the AUTO STOP switch to OFF position and then it will continue playback), or it
will not stop when it has reached the end when AUTO STOP is ON.
4. Turn the Volume Control Knob to adjust the volume.
CONNECT BT-D EVICE
1. Switch the function mode (9) to BT. The LED indicator will flash ue colour. in bl
2. Turn on the BT function your mobile phone, tablet or other BT device and search the turntable of
player with its name Fenton recordplayer .
3. After pairing and connection, the LED indicator wil stop flashing. You can play your music from l
your BT-device.
4. Turn the volume control knob to adjust the volume.
Noted: This device does not have a BT transmitter, this means that it is not possible to send sound via BT to, for example, a BT
speaker
When the unit is used as a speaker, function cannot be used at the same time.BT ALL OTHER PLAYBACK S


Product specificaties

Merk: Fenton
Categorie: Platenspeler
Model: RP168

Heb je hulp nodig?

Als je hulp nodig hebt met Fenton RP168 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Platenspeler Fenton

Handleiding Platenspeler

Nieuwste handleidingen voor Platenspeler