Fenton RP165L Handleiding

Fenton Platenspeler RP165L

Lees hieronder de 📖 handleiding in het Nederlandse voor Fenton RP165L (16 pagina's) in de categorie Platenspeler. Deze handleiding was nuttig voor 84 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

RP165 Series Record Player Set

Ref. nr.: 102.151; 102.152; 102.153; 102.154; 102.155

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.3

ENGLISH

Congratulations to the purchase of this Fenton produ . Please read this manual thoroughly prior to using the unit in order to ct

benet fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the unit, please ask advice from a

specialist. When the unit is switched on for the  t time, rs

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause electrical shock and malfu tion. nc

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

n d to be replaced by a qualied technician. ee

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the unit on. Contact your dealer. Do

NOT connect the unit to a rheostat or di er. mm

- To avoid re and shock hazard, do not expose the unit to

rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a -16A fuse. 10

- During a thunders rm or if the unit will not be used for a to

longer period of time, unplug it from the mains. The rule

is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the unit in

humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Do not repeatedly switch the xture on and o. This

shortens the fe time. li

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a special ist.

- Do not force the controls.

- This unit is with speaker inside which can cause

magnetic eld. Keep this unit at least 60cm away from

computer or TV.

- If this product have a built-in lead-acid rechargeable

battery. Please recharge the battery every 3 mont if hs

you are not going to use the product for a long period of

time. Otherwise the battery may be permanently

damaged.

- If the battery is damaged please replace with same

specications battery. And dispose the damaged battery

environment friendly.

- If the it has fallen, always have it checked by a un

qualied technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the unit o prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables

prior to moving the unit.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the coun y is suitable for this unit. tr

- Keep the original packing material so that you can

transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitud to cause a shock hazard. e

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

The unit has been certied CE. It is prohibited to make any changes to the unit. T y would invalidate the CE certicate and he

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Pl se bring them to a recycling centre. Ask your local authorities or your ea

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This wou also invalid ld

your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings

contained in this manual. Fenton cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations

and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCT ION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are

present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if

any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing

materials. In the event that the product must be returned to the factory, it is important that the product returned in the originbe al

factory box and packing.

If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The

arising condensation water might damage your device. Leave the device itched o until it has reached room temperature. sw

OVERVIEW

1. Tone arm Lever

The xed tonearm can be raised and lowered pressing the raise / lower lever.

2. -arm Sta Tone nd

3. 33 / 45 / 78 RPM Switch

This switch controls the RPM of the turntable platter.

4. Autos p Switch ON/OFF to

This switch turns auto stop on or o. When the automatic stop is enabled, the platform will start rotating as soon as the

tone arm is placed over the record and will stop rotating when it has reached the end of the record. Some vinyl rec ds or

stop fore the end do not stop when the end is reached. In this case set Auto-stop to OFF. be or

5. Tone arm Clip

This specially designed arm clip secures the tonearm while at rest or when not in use.

6. Cartridge with needle

When the turntable is not in use it is recommendable to place the removable protection cover on the stylus. ,

7. Volume control

Adjust the volume for the speakers.

8. LED Indicator

Indicator lights up when power turned on.

9. Function Mode

Select the BT or phono play function.

10. Platter

Place you record here. r

11. 45RPM Platter

12. DC IN port

Connecting the 12Volt/DC power adaptor.

13. Line output

The sound signal from long-playing record is sent to this line output. Connect this signal to the line input of an such as

an amplier or a line input of a CD/DVD player.

OPERATION

1. Switch the fu tion mode (9) to PH. Turn on the power switch at the rear of the turntable player. The indicator will nc

become red colou r.

2. Place a record on the turntable platter and select the desired speed (33/45/78RPM) according to the record.

NOTE: when playing a 4 PM record, use the included 45RPM adapter located inside the 5R

accessories bag.

3. Remove the stylus protector. Open the tone-arm clip to release the tone-arm. Push the lift lever

backward to raise the tone-arm and gently move the tone-arm to the desired pos ion over the it

record. The turntable will begin to spin when the arm is moved toward the record. Push the lift

lever forward to lower the tone-arm slowly onto the desired position on the record to begin playing

the record.

NOTE: -The record will begin t spin only when the tone-arm is moved toward the record if the Auto Stop is turned on. o

- If the AUTO STOP ON/OFF Switch is turned ON, the record will stop automatically when nished (For some

few vinyl records, it will stop when it does not come to the e OR it will not stop when it comes to the end.). If nd

Auto Stop Control is turned OFF, record will NOT stop automatically when nishe d.

4. Turn the Volume Control Knob to adjust the volume.

CONNECT BT-DEVI CE

1. Switch the function mode (9) to BT. The LED indicator will ash ue colour. in bl

2. Turn on the BT function your mobile phone, tablet or other BT device and search the turntable of

player with its name Fenton recordplayer .

3. After pairing and connection, the LED indicator wil stop ashing. You can play your music from l

your BT-device.

4. Turn the volume control knob to adjust the volume.

Noted: This device does not have a BT transmitter, this means that it is not possible to send sound via BT to, for example, a BT

speaker

When the unit is used as a speaker, function cannot be used at the same time.BT ALL OTHER PLAYBACK S

Product specificaties

Merk:	Fenton
Categorie:	Platenspeler
Model:	RP165L
Kleur van het product:	Zwart
Gewicht:	5400 g
Breedte:	262 mm
Diepte:	361 mm
Hoogte:	465 mm
Soort:	Draaitafel met riemaandrijving
AC-adapterfrequentie:	50-60 Hz
AC-adapter ingangsspanning:	100-240 V
Soort voeding:	AC
Aantal:	1
AC-adapter, uitgangsspanning:	12 V
Nominale snelheid:	33 1/3, 45, 78 RPM
Type cartridge:	Keramische stereo-cartridge
Stroomverbruik (typisch):	100 W
Line outputs (RCA):	1