Fenton RP135W Handleiding

Fenton Platenspeler RP135W

Lees hieronder de 📖 handleiding in het Nederlandse voor Fenton RP135W (20 pagina's) in de categorie Platenspeler. Deze handleiding was nuttig voor 68 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

RP135W Record Player 60 s’

Ref. nr.: 102 19.1

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

V1.2

ENGLISH

Congratulations to the purchase of this Fenton product. Please read this manu thoroughly prior to using the unit in order to al

benet fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the unit, please ask advice from a

specialist. When the unit is switched on for the rst time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause electrical shock and malfunction.

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the unit on. Contact your dealer. Do

NOT connect the unit to a rheostat or dimmer.

- To avoid re and shock hazard, do not expose the unit to

rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the unit will be used for a not

longer period of time, unplug it from the mains. The rule

is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the unit in

humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Do not repeatedly switch the xture on and o. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the controls.

- This unit is with speaker inside which can cause

magnetic eld. Keep this unit at least 60cm away from

computer or TV.

- If this product have a built-in lead-acid rechargeable

battery. Please recharge the battery every 3 months if

you are not going to use the product for a long period of

time. Otherwise the battery may be permanently

damaged.

- If the battery is damaged please replace with same

specications battery. And dispose the damaged battery

environment friendly.

- If the unit has fallen, always have it checked by a

qualied technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the unit o prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables

prior to moving the unit.

- Make sure that the mains lead nnot be damaged when ca

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this uni t.

- Keep the original packing material so that you can

transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate and

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycli centre. Ask your local authorities or your ng

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make changes to the unit. This would also invalid any

your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings

contained in this manual. Fenton cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations

and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCT ION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are

present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if

any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing

materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original

factory box and packing.

If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The

arising condensation water might damage your device. Leave the device switched o until it has ached room temperature. re

OVERVIEW

1. Tuning knob

2. USB port

3. Standby indicator

4. Standby button

5. Function button

6. PREV button

7. NEXT button

8. PLAY/PAUSE button

9. STOP button

10. REC button

11. BT indicator

12. REC indicator

13. OPEN/CLOSE button

14. Volume control knob

15. Antenna

16. Headphone port

17. AUX IN socket

18. RCA output socket to connect external

speakers(with power amplier built- in)

19. Power ON/OFF switch

20. DC IN jack

21. 45RPM adaptor

22. Turntable platter

23. Speed selector

24. Tonearm

25. AUTO STOP ON/OFF Switch

26. Tone Arm Lock

27. Cartridge/needle

LISTEN TO O FM RADI

• Press standby button [4] and the default mode is FM radio mode.

• Rotate the tuning knob [1] to search for the FM radio station manually.

• Press the button [8] for 2 seconds to search stations and save stations with name P01, P02, etc.

• ss buttons [6 7] to switch between saved stations. Pre ] [

Recording

Plug in the USB drive to the USB port [2] at the front of the unit; press the REC button [ ], the REC indicator [ ] will light up 10 12

and the letters USB becomes ashing on the display and the radio program will be recorded into USB drive; press the STOP

button [9] to save the recorded le and stop recording.

PLAYING A CD

• Press the function button [5] to enter into the CD mode; press OPEN/CLOSE button [13] to open the disc tray, place

disc label side up on the tray, press OPEN/CLOSE button [ ] close the tray the disc will start playing once loaded. 13 to ;

• To pause playback press the PLAY/PAUSE button [8], to continue playback press PLAY/PAUSE button [8] again.

• To stop playback press STOP button [9].

• To skip backwards through tracks, press PREV button [6] . To skip forwards through tracks press NEXT button [7] .

Recording

There are two ways to record CD via USB:

1. Recording of one track

• Press the REC button [ ] he REC indicator [ ] will light up, on the display, REC will appear and then ONE will 10 , t 12

appear

• Press the REC button [ ] to conrm the recording. 10

• Press the NEXT button [7] to select the song to be recorded.

• Press the REC button [ ] to conrm the selection. The single song recording wil automatically end up when that song 10 l

playback is nished. During recording, you can also press STOP button [9] to stop the recording.

2. Recording of all music tracks:

• Press the REC button [ ], the REC indicator [ ] will light up, on the display, REC will appear and then ONE will 10 12

appear.

• Press the NEXT button [7] and then ALL will appear on the display.

• Press the REC button [ ] to start recording. During recording, you can also press STOP button [9] to stop the 10

recording.

Product specificaties

Merk:	Fenton
Categorie:	Platenspeler
Model:	RP135W
Kleur van het product:	Hout
Gewicht:	3800 g
Breedte:	325 mm
Diepte:	345 mm
Hoogte:	170 mm
Soort:	Draaitafel met riemaandrijving
AC-adapterfrequentie:	50/60 Hz
AC-adapter ingangsspanning:	100-240 V
Bluetooth:	Ja
Aantal ingebouwde luidsprekers:	2
Aantal USB-aansluitingen:	1
Certificering:	CE
Soort voeding:	AC
Aantal:	1
AC-adapter, uitgangsspanning:	12 V
Ondersteunde frequentiebanden:	FM
Nominale snelheid:	33 1/3, 45, 78 RPM
Cd-speler:	Ja
Werking:	Handmatig
Ingebouwde versterker:	Ja
Ingebouwde radio:	Ja