Fenton RP112 Handleiding

Fenton Platenspeler RP112

Lees hieronder de 📖 handleiding in het Nederlandse voor Fenton RP112 (12 pagina's) in de categorie Platenspeler. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

RP112 Series Record Player BT

Ref. nr.: 102.157; 102.159

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

V1 .0

ENGLISH

Congratulations to the purchase of this Fenton product. Please read this manual thoroughly prior to using the unit in order to

benet fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid re and/or electrical shock epairs must only be carried out by a qualied technician in order to avoid electrical shock. . R

Keep the manual for future reference.

- Prior to using the unit, please ask advice from a

specialist. When the unit is switched on for the rst time, fi

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause electrical shock and malfunction.

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged m s lead can cause electrical shock ain

and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the unit on. Contact your dealer. Do

NOT connect the unit to a rheostat or mmer. di

- To avoid re and shock hazard, do not expose the unit to

rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the unit will not be used for a

longer period of time, unplug it from the mains. The rule

is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the unit in

humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Do not repeatedly switch the xture on and o. This

shortens t life time. he

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force e controls. th

- This unit is with speaker inside which can cause

magnetic eld. Keep this unit at least 60cm away from

computer or TV.

- his unit have a built-in lead-acid rechargeable battery. If t

Please recharge the battery every 3 months if you are

not go to use the unit for a long period of time. Or the ing

battery may be damaged.

- If the battery is damaged please replace with same

specications battery. And dispose the damaged battery

environment friendly.

- If the unit has fallen, always have it checked by a

qualied technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the unit o prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables

prior to moving the unit.

- Make sure that the mains l cannot be damaged when ead

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this unit.

- Keep the or nal packing material so that you can igi

transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate t CE certicate anhe d

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask ur local authorities or your yo

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid

your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings

contained in this manual. Fenton cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations

and warnings. This is also applicable to all damages in whatever form.

OVERVIEW

1. 45RPM Adaptor

This adaptor allows you to play 45RPM records.

2. Tone arm Lever

Raises and lowers the tonearm.

3. 33 / 45 / 78 RPM Switch

This switch controls the RPM of the turntable platter.

4. Autostop Switch ON/OFF

This switch turns auto stop on or o. When the automatic

stop is enabled, the platform will start rotating soon as as

the tone arm is placed over the record and will stop

rotating when it has reached the end of the record. Some

vinyl records stop fore the end do not stop when the be or

end is reached. In this case set Auto-stop to OFF.

5. Arm Clip

This specially designed arm clip secures the tonearm

while at rest or when not in use. The arm clip has been

designed to remain in the up position while unlocked.

6. Cartridge with needle

When the turntable is not in use, it is recommendable to

place the removable protection cover over the stylus.

7. LED indicator

8. Power & volume control kn ob

To power on the record player, turn this knob clockwise

until it clicks. When powered on, use this knob to adjust

the output volume. To turn o the record player, turn this

knob counter clockwise until it clicks.

9. DC IN port

Connecting the Volt/DC power adaptor.12

10. RCA Line output

The audio from a playing vinyl record is sent to this line-

level coaxial audio output. This must not be connected to

phono level devices.

11. Speakers

OPERATION

1. Connect the record player with the power adapter and plug the other end into a wall power outlet.

2. Remove the white protective needle cover by gently pulling towards the fr of the unit. ont

3. Place a vinyl record on the turntable platter and select the desired speed (33/45/78RPM) according to

the record.

4. Open the tone arm clip to release the tone arm. Gently move the tone arm and put the cartridge onto

the desired positi the record and the turntable player starts to play. on of

5. Turn the volume control knob clockwise to adjust the volume.

Noted: If the AUTO STOP ON/OFF Switch is turned ON, the record will stop automatically when nished. If Auto Stop Control is

turned OFF, record will NOT stop automatically when nished.

BT CONNECTION

BT is the default mode when the auto/stop switch is set to ON position. The LED indicator will ash in blue color.

Turn on the -function on your mobile phone or tablet PC on and then search the turntable player (Fenton recordplayer). After BT

pairing and connection, the LED will light up continuously in blue color and you can play your music on your mobile phone or

tablet PC on this turntable player.

Turn the volume control to adjust the volume. (The volume control of the mobile phone, tablet or PC can also aect the total

volume.)

Product specificaties

Merk:	Fenton
Categorie:	Platenspeler
Model:	RP112
Kleur van het product:	Black, Wood colour
Ingebouwd display:	Nee
Gewicht:	3300 g
Breedte:	310 mm
Diepte:	330 mm
Hoogte:	120 mm
Soort:	Draaitafel met directe aandrijving
Gebruikershandleiding:	Ja
Materiaal behuizing:	Hout
AC-adapterfrequentie:	50/60 Hz
AC-adapter ingangsspanning:	100/240 V
Type verpakking:	Doos
Aantal luidsprekers:	2
Volumeregeling:	Draaiknop
Soort voeding:	AC
Aantal:	1
AC-adapter, uitgangsspanning:	12 V
Nominale snelheid:	33, 45, 78 RPM
Werking:	Handmatig
Inclusief stofhoes:	Ja
Line outputs (RCA):	2
Draaitafel snelheden:	45 RPM
Ondersteunde sample rates:	32 kHz