Fender KXR 60 Handleiding

Fender Keyboard KXR 60

Lees hieronder de šŸ“– handleiding in het Nederlandse voor Fender KXR 60 (7 pagina's) in de categorie Keyboard. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
Sixty
T H E S O U N T H A T C R E A T E S L E G E N D SD
P/N 049254
Owner,s Manual
KEYBOARD
EXTENDED
RANGE
Your new FenderĀ®KXR 60 Keyboard Ampliļ¬er is the result
of Fenderā€™s ongoing dialog with many of todayā€™s top musi-
cians. It uses state of the art technology to deliver clear,
resonant and most importantly... musical sound.
The KXR 60 is actually much more than just a keyboard
amp. With its heavy-duty, FenderĀ®Special Design speaker
and piezo-electric horn, it is a self-contained, portable P.A.
system, suitable for almost any musical instrument requiring
full-range sound reinforcement. This makes the KXR 60
ideal for amplifying electronic keyboards, acoustic/electric
guitar, electric violin or voice. Compact packaging and
medium level output power make the KXR 60 the perfect
full-range instrument ampliļ¬er for rehearsal, studio or small
club performances.
The preamp section of the KXR 60 features two indepen-
dent channels, a four band master EQ, Reverb and Master
Volume controls. Each channel features a single 1/4 inch
Input jack and Volume control. The Eļ¬€ects Send and Eļ¬€ects
Return jacks can be used with a wide variety of eļ¬€ects
devices, or as patch points for slaving multiple amps
together. The Eļ¬€ects Send can also be used to connect
your KXR 60 directly to a recording console or sound rein-
forcement mixer. A tape player or drum machine can be
mixed with the preamp signal (pre-eļ¬€ects loop) by using
the Tape In jacks. The Headphones jack automatically
mutes the internal speaker while driving stereo or mono
headphones for private practice sessions.
The KXR 60's rugged 50 watt power ampliļ¬er was
designed to give years of quality service under all condi-
tions and is equipped with a unique implementation of our
exclusive DELTACOMPTM adaptive compression system.
With DELTACOMPTM, it is practically impossible to cause
the power ampliļ¬er to clip (distort). Also, apparent com-
pressor release time is kept short keeping distortion to a
minimum at low frequencies.
Your selection of a FenderĀ®ampliļ¬er will be rewarded with
years of quality performance and a wide range of musical
sounds. The built in quality of your FenderĀ®ampliļ¬er is the
result of over four decades of dedication in the combined
skills of research and development by our engineers and
musicians.
That is why we proudly say... FenderĀ®, The Sound That
Creates Legends.
INTRODUCTION
CHANNEL 1 INPUT (1/4" Phone)- Plug-in connection
for instruments. This balanced input can handle as
much as 8V R.M.S.
CHANNEL 1 VOLUME- This control adjusts the pream-
pliļ¬er gain of channel 1. It works in conjunction with
the Master Volume control (item H) to set the overall
loudness of the ampliļ¬er for Channel 1 only. Being a
true ā€œgainā€ control, it allows for the use of a variety of
microphones, keyboards or other instruments with dif-
fering output signal levels. Low-level instruments gen-
erally require a higher Channel Volume setting, while
ā€œhotterā€ keyboards require a lower Channel Volume
setting.
CHANNEL 2 - This channel is provided for an addi-
tional instrument. Its input and volume control operate
in the same manner as items A and B in channel 1.
This channel is muted when nothing is plugged into its
input, and thus will contribute no additional noise to
the ampliļ¬er output when left unused. Both channels
may be used simultaneously, however Channel 1
should be used ļ¬rst if only one input is needed.
EQUALIZER- The equalizer allows precise adjustments
of the tonal characteristics of the ampliļ¬er. Each con-
trol provides a 12 dB boost or cut to bands of frequen-
cies centered about 100, 338, 1188, and 4000 Hz.
REVERB CONTROL- This control adjusts the amount
of reverb to be mixed with the dry signal. The input to
the reverb assembly is the sum of Channels 1 and 2.
EFFECTS SEND JACK- This jack provides an unbal-
anced output signal from the preamp. This output can
be used with the Eļ¬€ects Return jack (item G) as a patch
point for mono eļ¬€ects devices. The Eļ¬€ects Send is
connected to the input of the eļ¬€ect (digital delay or
other eļ¬€ects device) and the output of the eļ¬€ect is con-
nected to the Eļ¬€ects Return jack (Item G). The Eļ¬€ects
Send can also be used to provide a signal to a record-
ing or sound reinforcement mixer. In addition, this
output can be used to drive another KXR 60 used as a
slave amp. This is done by connecting a standard gui-
tar cord from the Eļ¬€ects Send jack of the master amp
to the Eļ¬€ects Return jack of the slave amp.
A.
B.
C.
D.
E.
F.
KXR 60 FRONT PANEL FUNCTIONS


Product specificaties

Merk: Fender
Categorie: Keyboard
Model: KXR 60

Heb je hulp nodig?

Als je hulp nodig hebt met Fender KXR 60 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Keyboard Fender

Handleiding Keyboard

Nieuwste handleidingen voor Keyboard