Fellowes Starlet 90 Handleiding

Fellowes Inbindmachine Starlet 90

Lees hieronder de 📖 handleiding in het Nederlandse voor Fellowes Starlet 90 (40 pagina's) in de categorie Inbindmachine. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/40

fellowes com

Home Comb Binder

Please read these instructions before use.

Veuillez lire ces instructions avant utilisation.

Lea estas instrucciones antes del uso.

Bitte lesen Sie diese Anleitungen sorgfältig, bevor Sie das Gerät benutzen.

Prima dell’uso, si raccomanda di leggere questo manuale di istruzioni.

Gelieve deze instructies te lezen vóór gebruik.

Läs dessa instruktioner före användningen.

Læs venligst denne vejledning før anvendelse.

Lue nämä ohjeet ennen käyttöä.

Vennligst les nøye igjennom denne bruksanvisningen før bruk.

Przed użyciem proszę przeczytać instrukcje.

Перед началом эксплуатации обязательно прочите данную инструкцию.

Παρακαλείσθε να διαβάσετε αυτές τις οδηγίες πριυ χρησιμοποιήσετε το προϊόν.

Kullanmadan önce lütfen bu talimatlari okuyun.

Před použitím si pročtĕte tyto pokyny.

Pred použitím si prečítajte tieto pokyny.

Használat előtt kérjük, olvassa el az alábbi utasításokat.

Leia estas instruções antes da utilização.

mm inch number of pages

6mm 1/4” 2-20

8mm 5/16” 21-40

10mm 3/8” 41-55

12mm 1/2” 56-90

ENGLISH

CAPABILITIES

IMPORTANT SAFETY INSTRUCTIONS

When punching;

- always ensure the machine is on a stable surface

- test punch scrap sheets and set the machine before punching ﬁnal documents

- remove staples and other metal articles prior to punching

- never exceed the machines quoted performance

COMB DIAMETER & DOCUMENT SIZES

Punching Capacity

Paper sheets

70-80g / 20lb 7 sheets

Transparent covers

100-200 micron / 4-8 mil 2 sheet

200+ micron / 8+ mil 1 sheet

Other standard covers

160-270g / 40-60 lb 2 sheet

270+g / 60+ lb 1 sheet

Binding Capacity

Max comb size 12mm / 1/2”

Max document (80g / 20lb) 90 sheet

Technical Data

Paper dimensions A4

Punching slots 21

Slot pitch 14.28mm / 9/16”

Adjustable edge guide yes- rotary

Waste tray capacity c.600 sheets

Net weight 4 kg / 8.8lb

Dimensions (LxDxH) 450 x 250 x 80mm / 17.7” x 9.8” x 3.1”

Please keep for future reference.

Comb diameter sizes

Read Before Using!

Need Help?

Customer Service…

www.fellowes.com

Let our experts help you

with a solution.

Always call Fellowes

before contacting

your place of purchase.

Comb storage and Document measure

Waste tray

Comb storage

and Document

measure

Document

support (lid)

Punch handle

Comb

opening

lever

Wheel

to adjust

edge guide

Carry handle

Paper entry

Adjustable

edge guide

Window

CORRECTING A BOUND DOCUMENT REMOVAL OF WASTE CLIPPINGS

WARRANTY

Fellowes warrants all parts of the binder to be free of defects in material and workmanship for 2 years from the date of purchase by the original

consumer. If any part is found to be defective during warranty period, your sale and exclusive remedy will be repair or replacement, at Fellowes’

option and expense, of the defective part. This warranty does not apply in cases of abuse, mishandling or unauthorised repair. Any implied

warranty, including that of merchantability or ﬁtness for particular purpose, is hereby limited in duration to the appropriate warranty period set

forth above. In no event shall Fellowes be liable for any consequential damages attributable to this product. This warranty gives you speciﬁc legal

rights. You may have other legal rights that vary from this warranty. The duration, terms and conditions of this warranty are valid worldwide,

except where different limitations, restrictions or conditions may be required by local law. For more details or to obtain services under this

warranty, please contact Fellowes or your dealer. 3

SET UP

TROUBLESHOOTING

Problem

Punched holes are not central

Machine will not punch

Punch holes are not parallel to edge.

Partial holes

Damaged hole edges

Waste tray leaks

Cause

Edge guide not set

Blockage

Debris is stuck below dies.

Sheets not correctly aligned to punch pattern.

Possibly overloading the machine

Waste tray is not correctly inserted or ‘burst feature’ has activated

Solution

Adjust edge guide until hole pattern is correct

Check waste tray is empty. Check for blockage to paper entry.

Take stiff cardboard and slide into the paper entry. Move the cardboard sideways

to release any stray clippings into the waste tray.

Adjust edge guide and test punch scrap sheets until correct

Punch plastic covers with paper sheets. Reduce number of sheets being punched.

Check waste tray is empty and ‘burst feature’ is closed.

1. Ensure the machine is on a

stable surface.

2. Check waste tray is empty and

correctly ﬁtted.

3. Lift the lid. Ensure the comb-

opening lever is pushed backwards.

4. Lift the punch handle to its

upright position.

BEFORE YOU BIND

1. Select the correct comb diameter. 2. Insert the plastic comb into

the mechanism.

3. Pull comb-opening lever

forward to open the comb.

4. Test punch scrap sheets to check

edge guide setting.

STEPS TO BIND

1. Punch front and back covers ﬁrst. 2. Punch sheets in small batches

that do not overload the machine

or the user.

3. Load punched sheets directly

onto the opened comb. Starting

with the front of the document.

4. When all punched sheets are loaded

onto the comb, push the comb lever

backwards to close the comb and

remove the bound document.

3 4

2 3 4

21 3 4

Additional sheets may be included or removed at any time by opening and

then closing the comb as previously described.

The waste tray is located under the machine and is accessed from the right side. For

best results empty the tray regularly.

STORAGE

Lower the punch handle to the horizontal position. Lower the lid. The Starlet comb binder is designed to be stored horizontally or vertically.

There are feet that enable them to stand upright.

Front

Cover

Back

Cover

Max

(80gsm/20lbs)

Product specificaties

Merk:	Fellowes
Categorie:	Inbindmachine
Model:	Starlet 90
Gewicht:	3500 g
Aanbevolen mediagewicht:	80 g/m²
Afmetingen (B x D x H):	450 x 250 x 80 mm
Bindcapaciteit:	90 vel
Perforatiecapaciteit:	7 vel
Maximale papier breedte:	12 mm