Fellowes Orion E 500 Handleiding

Fellowes Inbindmachine Orion E 500

Lees hieronder de 📖 handleiding in het Nederlandse voor Fellowes Orion E 500 (54 pagina's) in de categorie Inbindmachine. Deze handleiding was nuttig voor 62 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/54

1789 Norwood Avenue, Itasca, Illinois 60143 • 1-800-955-0959 • www.fellowes.com

B r a n d s

Heavy Duty Comb Binder

ENGLISH 3-6

FRANCAIS 7-10

ESPAÑOL 11-14

DEUTSCH 15-18

ITALIANO 19-22

NEDERLANDS 23-26

SVENSKA 27-30

DANSK 31-34

SUOMI 35-38

NORSK 39-42

POLSKI 43-46

РУССКИЙ 47-50

EΛΛΗΝΙΚΑ 51-54

TÜRKÇE 55-58

ČESKY 59-62

SLOVENSKY 63-66

MAGYAR 67-70

PORTUGUÊS 71-74

БЪЛГАРСКИ 75-78

ROMÂNĂ 79-82

HRVATSKI 83-86

SLOVENŠČINA 87-90

SRPSKI 91-94

95-98

99-102

Please read these instructions before use.

Lire ces instructions avant utilisation.

Lea estas instrucciones antes de usar la máquina.

Diese Anleitungen vor Gebrauch genau durchlesen.

Primo dell’uso, si raccomanda di leggere questo manuale di

istruzioni.

Lees deze instructies zorgvuldig door voordat u de machine in

gebruik neemt.

Läs dessa anvisningar innan du använder apparaten.

Læs venligst denne vejledning før anvendelse.

Lue nämä ohjeet ennen käyttöä.

Vennligst les nøye igjennom denne bruksanvisningen før bruk.

Przed użyciem proszę zapoznać się z niniejszą instrukcją.

Перед эксплуатацией устройства ознакомьтесь с

содержанием данной инструкции.

Διαβάστε τις παρακάτω οδηγίες πριν από τη χρήση.

Kullanmadan önce lutfen bu talimatlari okuyen.

Pred použitím si pročtěte tyto pokyny.

Pred poużitím si prečítajte tieto pokyny.

Kérjük, hogy használat elött olvassa el az utasításokat.

Leia estas instruções antes da utilização.

Моля, прочетете инструкциите преди употреба.

Vă rugăm să citiţi instrucţiunile înainte de utilizare.

Pažljivo pročitajte ove upute prije korištenja.

Pred uporabo izdelka preberite ta navodila za uporabo.

Molimo da ova uputstva pročitate pre upotrebe.

HB .

INDEX

CUSTOMER SERVICE & SUPPORT

www.fellowes.com

Europe Freephone: 00800-1810-1810

Benelux: +31-(0)-13-458-0580

Deutschland: +49 (0)511 545489-0

France: +33 (0) 1 78 64 91 00

Italia: +39-071-730041

Polska: +48 (22) 205-21-10

España/Portugal: +34-91-748-05-01

United Kingdom: +44 (0) 1302 836836

Declaration of Conformity

Fellowes, Inc.

Unit 2 Ontario Drive, New Rossington, Doncaster, DN11 0BF, England declares that the product model Orion E conforms with the

requirements of the Restriction of Hazardous Substances Directive (2011/65/EU), the Low Voltage Directive (2014/35/EU), the

Electromagnetic Compatibility Directive (2014/30/EU), the WEEE directive (2012/19/EU), and below harmonized European EN

Standards.

Safety: EN60950-1: 2006/A2:2013

EMC Standard: EN55014-1:2006+A1:2009+A2:2011

EN55014-2:1997+A1:2001+ A2:2008

EN61000-3-2:2014

EN61000-3-3:2013

Year Affixed: 16

Itasca, Illinois, USA

July 1, 2016

John Fellowes

405609_RevC_EUR_Orion_E_25L_103116.indd 110-2 10/31/16 4:34 PM

CAPABILITIES

IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE

When punching;

- always ensure the machine is on a stable surface

- test punch scrap sheets and set the machine before punching ﬁnal

documents

- remove staples and other metal articles prior to punching

- never exceed the machines quoted performance

Keep the machine away from heat and water sources.

Never attempt to open or otherwise repair the machine.

When binding;

- Keep the machine away from heat and water sources.

- Never attempt to open or otherwise repair the machine.

- Plug the machine into an easily accessible socket.

- Note – this machine has a thermal cut-out device which activates

when the machine is overheated during use. It will automatically reset

when the machine is safe to operate.

Punching Capacity

Paper sheets

70 - 80g / 20lb 30 sheet

Transparent covers

100-200 micron / 4 - 8 mil. 4 sheet

200+ micron / 8+ mil. 3 sheet

Other standard covers

160-270g / 40 - 60lb 4 sheet

270+g / 60+ lb 3 sheet

Binding Capacity

Max binding comb size 51 mm

Max document (80g / 20lb) approx. 500 sheets

Technical Data

Paper dimensions A4, A5, US letter, US cover

Punching slots 21

Releasable dies 21 dies (1 - 21)

Adjustable back margin 5 positions - (2.5 - 6.5mm)

Slot pitch 14.28 mm / 9/16”

Adjustable edge guide Yes

Waste tray capacity approx. 1800 sheets

Net weight 17 kg / 37lb

Dimensions (WxDxH) 40 x 40 x 25 cm

Voltage 220-240V 50/60Hz

Motor wattage 160W 1.0A

ENGLISH

Need Help?

Let our experts help you with a solution.

Customer Service... www.fellowes.com

Always call Fellowes before contacting your place of purchase (see the

rear cover for contact details.

Adjustable

edge guide

Waste tray

Punch selection

Paper entry

Document measure

Comb opening

lever Back margin

adjustment

Foot pedal

COMB DIAMETER & DOCUMENT SIZES

SET UP

Comb diameter sizes

To select the correct size comb diameter for a document use the document measure card as printed on the machine.

Ensure the machine is on a

stable surface.

Plug the machine into an eas-

ily accessible mains socket.

21 3

Switch the power on (located at

the rear of the machine).

Check the waste tray is empty

and correctly ﬁtted.

Ensure the comb opening lever

is pushed backwards.

405609_RevC_EUR_Orion_E_25L_103116.indd 5,4 10/31/16 4:34 PM

REMOVAL OF WASTE CLIPPINGS

TROUBLESHOOTING

Problem

No power

Not punching

Punched holes are not central

Machine will not punch

Punch holes are not parallel to

edge

Partial holes

Missing holes

Damaged hole edges

Cause

Machine is not switched on

Thermal cut-out switch has activated

Edge guide not set

Blockage

Debris is stuck below dies

Sheets not correctly aligned to punch

pattern

Selectable dies are not selected to punch

Possibly overloading the machine

Solution

Switch on machine at rear next to plug inlet and at the

socket

Allow machine to cool down for 30-60 minutes.

Adjust edge guide until hole pattern is correct

Check waste tray is empty. Check for blockage to paper

entry

Take stiff cardboard and slide into the paper entry. Move

the cardboard sideways to release any stray clippings into

the waste tray

Adjust edge guide and test punch scrap sheets until correct

Check the current dies are selected to punch holes. To

select a die, push selector switch down at the front

Punch plastic covers with paper sheets. Reduce number of

sheets being punched

The tray should be emptied after every 50 operations to ensure no blockages occur.

This machine is ﬁtted with a fuse, located between the mains switch and mains socket on the rear of

the machine. To replace the fuse;

• Isolate the machine from the mains supply.

• Open the fuse holder with a screwdriver blade.

The holder contains two fuses, the loose fuse is a spare.

• Insert a new fuse in the holder and replace the holder in to the machine.

NOTE: Always use the recommended fuse (120W / 2A) and DO NOT replace it with one of a

different rating.

BEFORE YOU BIND

Select the correct comb diameter

using the document measure.

Select the correct punch proﬁle for

the sheet size. Select releasable

dies as appropriate.

Select the correct back margin

depth for the number of sheets.

To cancel a punch, pull the pin

forward. Test punch a sheet.

2 43

Insert the plastic comb into the

opening mechanism. Pull comb-

opening lever forward to open

the comb.

Test punch scrap sheets to check

edge guide setting.

Load punched sheets directly

onto the open comb.

5 6 7

Empty waste tray regularly -

ideally after each use.

Back

Cover

BINDING A DOCUMENT

Punch front and back covers

ﬁrst.

Punch sheets in small batches

that do not overload the

machine or the user.

When all punched sheets are

loaded onto the comb, push

the comb lever backwards to

close the comb and remove the

bound document.

Load punched sheets directly

onto the opened comb. Starting

with the front of the document.

21 43

Front

Cover

MAX 30

(80gsm)

CORRECTING A BOUND DOCUMENT

Additional sheets may be added or removed at any time by opening and then closing the comb as previously described.

405609_RevC_EUR_Orion_E_25L_103116.indd 6 10/31/16 4:34 PM

Product specificaties

Merk:	Fellowes
Categorie:	Inbindmachine
Model:	Orion E 500
Kleur van het product:	Grijs
Gewicht:	17009 g
Breedte:	400 mm
Diepte:	501 mm
Hoogte:	247 mm
Materiaal behuizing:	Metal, Plastic
Bindcapaciteit:	500 vel
Perforatiecapaciteit:	30 vel
Aansturingsmethode:	Electrisch
Maximale papier breedte:	- mm
Inbinden met plastic kam:	Ja