Extron Retractor SM HDMI Handleiding

Extron Niet gecategoriseerd Retractor SM HDMI

Lees hieronder de 📖 handleiding in het Nederlandse voor Extron Retractor SM HDMI (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

IMPORTANT:

Go to www.extron.com for the

complete user guide

, installation

instructions, and specifications.

Retractor SM • Installation Guide

This guide provides basic instructions for an experienced technician to quickly install the Extron

Retractor SM Show Me® cable retraction modules in an Extron TeamWork® Collaboration System and

in compatible Cable Cubby enclosures.

Additional instructions are available in the TeamWork Collaboration System Installation Guide and the

installation guides for the individual Cable Cubby® enclosures and the . All Retractor SM User Guide

are available at www.extron.com.

NOTE: For information on safety guidelines, regulatory compliances, EMI/EMF compatibility,

accessibility, and related topics, see the Extron Safety and Regulatory Compliance Guide

on the Extron website.

Planning

Retractor SM modules can be mounted in a horizontal, vertical, or angular orientation depending upon under‑table clearance and

accessibility.

Horizontal mounting is recommended to provide maximum legroom and to protect the Retractors against accidental damage.

Be certain the Horizontal Mounting Bracket can be fastened under the table or on a table support without bending the pulley

system or forcing it from a perpendicular angle with the enclosure (see the Top View diagram on page3).

Vertical mounting is used where insufcient under‑table space exists for horizontal mounting or where under‑table access is

limited. Ensure the Retractor SM modules hang freely without touching the oor and are not obstructed under the table.

Angular mounting is used where insufcient under‑table space exists for horizontal mounting and tabletop to oor clearance

prevents vertical mounting. An additional mounting hole allows installation at an angle providing extra oor clearance.

• For horizontal mounting, a Retractor SM Horizontal Bracket Kit is required.

• A Retractor SM Filler Module is required to occupy unused Retractor space.

• Depending on the enclosure, various Retractor SM Mounts are available, both Triple and Quad.

NOTE: See the for a list of compatible Retractor SM Mounts and brackets to suit the application and

Extron website

enclosure.

Mounting kits, bracket kits, ller modules, and accessories are available at www.extron.com.

For new installations, to determine the best location for the enclosure, keep in mind the under‑table space required for the

retraction system. Refer to the enclosure installation guide for mounting.

NOTE: Before starting an installation, determine if additional hardware is needed.

Required Tools and Additional Accessories

Horizontal Mounting

Bracket (Optional)

Retractor SM

Mount - Triple

Retractor SM

Mount - Quad (x2)

-or-

Retractor SM

Mount - Triple

(x4) (x4)

(x2)

(x3)

Filler Module

(Optional)

(x2)

( 2

)

Tape Measure Phillips Screw Driver Zip TiesMarking Pen Tweeker

Retractor SM • Installation Guide (Continued)

Getting Started — Determine Under-table Clearances

Follow the installation instructions provided in your Cable Cubby enclosure package to determine a suitable mounting location.

The diagrams that follow show the space required for a Retractor SM module installation in a compatible enclosure.

NOTES:

• To prevent objects from impeding cable retraction, ensure the exposed cable clears nearby obstructions.

• Excess cabling can cause clearance issues. Use zip ties to secure under‑table cabling to prevent accidental contact or

entanglement.

The Retractor SM module is mounted from below the enclosure.

Retractor SM

Horizontal Mounting Vertical Mounting Angular Mounting

15.2 in.

(386 mm)

25.7 in.

(653 mm)

27.4 in.

(696 mm)

8.3 in.

(211 mm)

14.4 in.

(366 mm)

13.3 in.

(338 mm)

17.7 in.

(450 mm)

Cable Cubby 1202

Cable Cubby 700

14.8 in.

(376 mm)

13.4 in.

(341 mm)

8.7 in.

(220 mm)

27.4 in.

(695 mm)

25.7 in.

(653 mm)

Pigtails

For connections to devices under the table, the Retractor SM

modules have 6feet (1.8m) of pigtail from the exit of the cable

retainer as shown.

6 ft. (1.8 m) Std.

Getting Started — Prepare the Retractors

The Retractor SM modules are delivered ready to mount vertically. No further modications are required. If the Share button is not

seated fully against the cable release assembly, conrm proper tension adjustment using the instructions in the Retractor SM User

Guide.

To mount a Retractor horizontally or at an angle:

Remo two enclosure screws ve

(one on each side) from this position

for horizontal and angular mounting.

Cable Stop Assembly

Share Button

Screws (one on each side)

To mount the Retractor at an angled position for increased under-table clearance:

Install the two enclosure screws

removed in step 1 (one on each side)

in the angular mounting location.

Mounting Location

For angular mounting, move the

cable stop assembly upward until

the angular mounting hole is visible.

Go to 3.

Angular Mounting Hole

Getting Started — Prepare the Enclosure

By now, you should be certain the Retractor SM modules have adequate under‑table clearance for installation and that proper

legroom is provided to avoid accidental contact with the system. You should have the required accessories for mounting the

retraction system and to congure the enclosure (see Required Tools and Additional Accessories on page1).

Horizontal

Brac tke

Top View

USB CHARGER

NOTE: For horizontal mounting instructions see

the and the Retractor SM User Guide Retractor

SM Horizontal Bracket Installation Guide.

DANGER:

• Disconnect the power from the Cable Cubby enclosure before

beginning a Retractor system installation.

• Débranchez l’alimentation du boîtier CableCubby avant de

commencer l’installation d’un système de Rétracteur.

Product specificaties

Merk:	Extron
Categorie:	Niet gecategoriseerd
Model:	Retractor SM HDMI
Kleur van het product:	Zwart
Gewicht:	1600 g
Breedte:	30 mm
Diepte:	684 mm
Hoogte:	109 mm
Gewicht verpakking:	1950 g
Breedte verpakking:	778 mm
Diepte verpakking:	156 mm
Hoogte verpakking:	64 mm
Soort:	Kabelhouder
Aantal per verpakking:	1 stuk(s)