Extron EBP VC1 EU Handleiding

Extron Niet gecategoriseerd EBP VC1 EU

Lees hieronder de 📖 handleiding in het Nederlandse voor Extron EBP VC1 EU (14 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/14

Product Category

eBUS® Button Panel EU and MK Series • Setup Guide

Overview

Extron offers a range of eBUS Button Panels (EBPs)in one-gang EU and MK form factors. They can be mounted into one-gang

EU or MK enclosures and can also be mounted alongside other EU, MK, or Flex55 products in larger enclosures. Each panel is a

fully customizable AV system control interface for use with Extron IPCPPro Series control processors. Individual EBPs are easily

congured and can be connected with other panels to provide control for large and complex AV systems.

NOTE: These products are only for use with Extron UL Listed IPCP Pro controller products.

Each EBP button panel has two eBUS ports that support power and communications between the IPCPPro control processor

and eBUS devices. Up to eight eBUS devices such as EBP button panels can be connected to the control processor and to each

other in various cabling topologies. Cabling topology refers to the physical layout of cabling interconnections between devices

in a network such as an eBUS system. eBUS systems can include daisy chain, star, or hybrid system (a combination of both)

topologies (see the eBUS Technology Reference Guide, available on www.extron.com, for basic diagrams). Every device must

have a unique identication address (eBUS ID) within the system.

Setup involves setting eBUS ID DIP switches on the EBPs, then using Extron GlobalCongurator® Plus and Professional

software, the Toolbelt utility, or Global Scripter programming software, to congure the control processor. Once congured, the AV

system can be controlled from any of its EBPs.

This guide provides basic instructions for an experienced installer to install the EBP EU or MK series button panels. For more

details on the EBPs, see the eBUS Technology Reference Guide, available on www.extron.com. For details on conguration or

programming, see the software help les.

EBP Rear Panel Features

+S -S G+V +S -S G

eBUS

PWR LOAD = 1.5W

PWR LOAD

= X.XW

+V +S -S G+V +S -S G

eB US

STATUS

GREEN LINK

COM ERROR

ID ERROR

AMBER

RED

EBP 104 EU and EBP 104 MK Models

Other EBP EU and MK Models

Figure 1. EBP EU Models: Rear View

The features shown in gure 1 are the same for all EBP EU and MK models, except for the EBP 104 EU and EBP 104 MK.

A — Up to eight devices can be connected to one control processor. Each device connected to the same control DIP switches

processor must have a unique eBUS ID, which is set using DIP switches (see ).

Step 4: Set the eBUS ID on page 6

B (2 ports) — The four-pole captive screw connectors use the Extron eBUS protocol to connect the panel to eBUS connectors

a controller and to other panels (see on page 9).

Step 5: Cable All Devices

C — Provide diagnostic information about the connection, communication, and power status eBUS connection status LEDs

of the panels.

zThe EBP 104 EU and EBP 104 MK has a single LED that can light yellow, red, or green.

zAll other EBP Decorator-style models have a single green LED.

For more information about how the LEDs are used for troubleshooting, see Step 7: Test and Troubleshoot on page 11.

D — Resets the rmware to the factory installed version. To reset the rmware:Reset button

1. Disconnect the eBUS cable that is providing power.

2. While reconnecting power, press and hold down the button.

3. Release the button 1 second after reconnecting power.

During the reset process, the front panel buttons are not lit. When the eBUS Status LED lights, the reset process is

complete, and the EBP is functioning normally. For the EBP 104 EU and EBP 104 MK, the green Link LED lights to show

that the EBP is functioning normally.

eBUS® Button Panel EU and MK Series • Setup Guide (Continued)

EBP Front Panel Features

Figure 2 shows the range of EBP EU front panels. The EBP MK series is the same except for the wall frame surrounding the

button plate. All buttons are back-lit with LEDs to identify the active button. Inactive buttons can be backlit dimly to help identify

them in low ambient lighting.

OFFON

Extron

LAPTOP

VIDEO

DOC

CAM

VGAHDMI

VOLUME

DISPLAY

OFFON

PC VIDEO

LAPTOP MUTE

Extron

VOLUME

DISPLAY

OFF

VIDEO

Extron

VOLUME

MUTE

CH +

CH −

TITLE

INFO

– +

AUX VIDEO

DOC CAM

VIDEO

LAPTOP

Extron

VIDEO

LAPTOP

DISPLAY

OFFON

Extron

SOURCE 3

SOURCE 1 SOURCE 2

MUTE

EBP 104 EU EBP 105 EU EBP 105P EU

EBP 106 EU EBP 108 EU EBP 110 EU

EBP VC1 EU EBP VC2 EU EBP NAV EU

Figure 2. EBP EU Series front panels

NOTES:

• The buttons and encoders must be congured or programmed to carry out their functions.

• Use Global Congurator Plus and Professional and Toolbelt to congure the EBP buttons and LEDs.

• Use Global Scripter to program the EBP buttons and LEDs.

A — These buttons must be congured to carry out various functions.Function buttons

B — Control the power to the display device. The button has a nub that can be felt with the nger tips.Power buttons

C Transmit LED — Blinks once when any button is pressed.

Volume Control

D Volume buttons — Increment or decrement audio volume.

E Volume LED meter — Shows the volume level.

F Volume rotary encoder — Increment or decrement audio volume.

G — Toggle between audio mute and unmute. You can congure the mute button so that it is backlit red when Mute button

muted and white when unmuted for a visual indication of the status.

Video Control

H Transport control buttons — Used to control a DVD or Blu-ray player.

Product Category

Planning the System and Installation

When planning to install an eBUS system, consider how many EBP button panels to use, maximum cable distance, cabling

topology, and mounting. See the eBUS Technology Reference Guide for more information about eBUS topologies.

Installation

Step 1: Get Ready

Use the following check list to prepare for the installation.

Download and install the latest version of the software, rmware, and device drivers needed to congure or program the

IPCPPro and control the connected AV products. See the (available at IPCPPro Series User Guide www.extron.com)

for details on software and drivers.

Obtain model names, drivers, and setup information for AV devices.

Determine which eBUS cabling topologies to use and obtain cables, mounting hardware, and any power supplies or

hubs required by that conguration.

Step 2: Prepare the Installation Site

ATTENTION:

• Installation and service must be performed by authorized personnel only.

• L’installation et l’entretien doivent être effectués par le personnel autorisé uniquement.

• If the EBP will be installed into ne furniture, it is best to hire a licensed, bonded craftsperson to cut the access hole

and perform the physical installation so the surface will not be damaged.

• S’il est prévu d’installer le EBP dans du beau mobilier, il est préférable de faire appel à un artisan autorisé et qualié

pour couper le trou d’accès et réaliser l’installation de telle façon que la surface ne soit pas endommagée.

• Follow all national and local building and electrical codes that apply to the installation site.

• Respectez tous les codes électriques et du bâtiment, nationaux et locaux, qui s’appliquent au site de l’installation.

Site preparation

The EBPEU panels t any one-gang EU junction boxes, enclosures having 60 mm mounting centers, or Flex55 enclosures. The

EBP MK panels t any standard MK junction box. In addition, Extron offers an assortment of optional in-wall junction boxes,

external wall boxes (EWBs), and surface or tabletop mounting boxes for use with the eBUS button panels (see www.extron.com).

NOTE: For the installation to meet UL requirements and to comply with National Electrical Code (NEC), the EBP must be

installed in a UL Listed junction box (not included with the EBP). The end user or installer must furnish the junction box.

Americans with Disabilities Act (ADA) compliance

When planning where to install these devices, you may need to consider factors affecting accessibility of the button panel such

as height from the oor, distance from obstructions, and how far a user must reach to press the buttons. For guidelines, see

sections 307 (“Protruding Objects”) and 308 (“Reach Ranges”) of the available at 2010 ADA Standards for Accessible Design

http://www.ada.gov/regs2010/2010ADAStandards/2010ADAStandards.pdf.

Step 3: Change the Buttons

You can replace a faceplate or one or more of the individual buttons. You can order replacement or custom buttons using the

Custom Button Builder at www.extron.com. To replace the buttons:

1. If required, remove the rotary encoder knob (EBP VC1 EU or EBP VC1 MK only) (see Remove the rotary encoder knob

(VC1 models only) on the next page).

2. Remove the button panel. For most models, see on the Remove the bezel (except the EBP 104 EU and EBP 104 MK)

following page. The procedure is slightly different for the EBP 104 EU and EBP 104 MK (see Remove the bezel on the EBP

104 EU or EBP 104 MK on the following page).

3. Separate the button panel from the control panel. This step uses the same procedure for all models (see Separate the bezel

from the button board (all models) on page 5)

4. Replace the buttons. For all models except the EBP 104 EU or EBP 104 MK, see Replace buttons for all models (except

EBP 104 EU and EBP 104 MK) on page 5 Replace buttons for the

. For the EBP 104 EU and EBP 104 MK, see

EBP 104 EU and EBP 104 MK on page 5.

Product specificaties

Merk:	Extron
Categorie:	Niet gecategoriseerd
Model:	EBP VC1 EU
Kleur van het product:	Black, White
Gewicht:	100 g
Breedte:	81 mm
Diepte:	10 mm
Hoogte:	81 mm
Materiaal:	Kunststof
Aantal polen:	4P