Extron Cable Cubby 202 EU Handleiding

Extron Niet gecategoriseerd Cable Cubby 202 EU

Lees hieronder de 📖 handleiding in het Nederlandse voor Extron Cable Cubby 202 EU (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

IMPORTANT:

Go to www.extron.com for the

complete user guide

, installation

instructions, and specifications.

Cable Cubby 202 • Installation Guide

This guide provides instructions for an experienced installer to install and connect the

Extron Cable Cubby 202 Cable Access Enclosures.

The Cable Cubby units are furniture-mounted enclosures for cable access,

connections, and AC power. Cables that are not in use can be stored out of

the way while remaining connected to the presentation system.

Planning

Check with local and state regulations before

starting the installation:

Ensure that the planned installation complies with building and

electrical codes.

Ensure that the planned installation complies with the Americans with Disabilities

Act or other accessibility requirements.

Check all parts and equipment before installation:

Ensure that all parts are present in each kit.

Ensure that necessary tools and equipment are available for the installation.

Preparing the Table

Cut a hole in the surface where the enclosure will be installed. .Read the following information before making a cut

Determine the best location for the enclosure

Ensure that the location where the Cable Cubby is to be installed is convenient for as many users as possible.

Ensure that the edge on which the lid opens is oriented correctly.

Ensure that there is ample space under the table for cables.

Choose a method for cutting the hole in the table

See the next page for details on cutting the hole in the table.

CABLE CUBBY

Kit Contents

Grommet Plugs

(3) 3/8", (1) 1/4"

AC Cord

Retainer Clip

(Non-US models only)

Cable Grommet Plate

and #4-40 Plate Sc wsre

Cable Cubby 202

Mini AAP and #4-40 Mounting

Screws (US model only)

Cable Cubby 202 • Installation Guide (Continued)

Preparing the Cable Cubby

Assemble the cable pass-through plate and (for US models) install a Mini AAP.

Choose one of the following methods for cutting the hole:

Hand Router and Routing Template Jigsaw and Paper Cut-Out Template CNC Wood Router

If using a CNC wood router or

other precise machinery, use the

exact cut-out dimensions (see the

table below).

Visit www.extron.com for Cable Cubby

routing template part numbers and

instructions.

Dimensions and cut-out templates are

available online at www.extron.com.

The opening in the table for the Cable Cubby should be cut only by licensed and bonded craftspeople.

CAUTION: Wear safety glasses when operating power equipment. Failure to comply can result in eye injury.

ATTENTION: Portez des lunettes de sécurité lorsque vous utilisez l’équipement électrique. Ne pas respecter cela peut

conduire à une blessure à l’oeil.

Cut-out Dimensions

User Access

Width

Side Dimension

7.0"

(17.8 cm)

3.25"

(8.3 cm)

US models only:

Install a Mini AAP into the

opening by the AC connection.

Connect cables to the AV

Mini AAP if necessary, and

secure the plate using the

provided mounting screws.

Insert the assembled plate into the

enclosu and secu the plate, using re re

the included plate screws.

Assemble the cable pass-through

plate with your choice of cables.AV

Snap the included hole plugs into

any unused holes.

Cut-O ut Templ ate for the Extr on

Cable Cubby 202

User Access

0.00” (0.00 c m)

0.02 (0.05 c m)

Outer Edge of Front Bez el

(Do not cut this line.)

1. Co nfir m the pro duct to be ins tal led .

2. Re mo ve the sur face cut- ou t are a

(gra y) fro m the tem pla te.

3. Me as ure the cutou t and te mpl ate .

4. Ma rk the p os itio n o n the

furn iture wher e the Cabl e Cub by 202

will be ins tal led .

5. Do uble check di me nsi ons and pos itio n,

the n cut the ope nin g.

P/N ??-????-01 R ev. A

Pag e size : 11" x 17"

Print scale 1:1

Do not shrink.

3.25"

(8.25 cm)

7.0"

(17.78 cm)

SURFACE

CUT-OUT

AREA

Cut-Out Radi us :

0.25"

(0.6 cm)

Cut-O u t T

Mounting and Installing the Cable Cubby in the Table

CAUTION: The anged edges of the top of the surface enclosure are sharp. These edges are also soft and may be easily

nicked or bent. Exercise caution when handling the enclosure to prevent personal injury or damage to the enclosure.

ATTENTION: Les extrémités à brides du haut de la surface du boîtier sont aiguisées. Ces extrémités sont aussi lisses

et peuvent facilement être coupées ou pliées. Soyez prudents lorsque vous manipulez le boîtier an d’éviter de

l’endommager ou de vous blesser.

Lower the Cable Cubby into the hole

to test the t. If necessary, carefully

enlarge the opening.

Remove the plastic strips and lm on the

surface of the Cable Cubby.

Ensure that the side clamps are

seated against the enclosure.

ATTENTION: When tightening the clamp screws, do not

exceed a torque rating of 5 inch-pounds. Overtightening

can damage the clamp mechanism and enclosure.

ATTENTION: Lors du serrage des pinces à vis, veillez à ne

pas dépasser une valeur de couple de 5 livres par pouce.

Un serrage excessif pourrait endommager le dispositif ainsi

que le boîtier.

Ensure that the Cable Cubby is rmly seated in the table.

Using a screwdriver, tu the clamp screw clockwise rn

and slowly tighten it to secu the enclosure to the surface.re

Product specificaties

Merk:	Extron
Categorie:	Niet gecategoriseerd
Model:	Cable Cubby 202 EU
Kleur van het product:	Zwart
Gewicht:	800 g
Materiaal:	Metaal
Code geharmoniseerd systeem (HS):	85389099