Evolution EVSP1013 Handleiding

Evolution Receiver EVSP1013

Lees hieronder de 📖 handleiding in het Nederlandse voor Evolution EVSP1013 (12 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
Vanco Part Number:
EVSP1013
HDMI® 1x3 Splitter
over Category 5e/6
Cable with additional
HDMI output
www.vanco1.com • 800.626.6445
HDMI®1 x 3 S P L I T T ER
over Cat5e/Cat6 Cable
with additional HDMI output
www.vanco1.com2
1. Do not expose this unit to water, moisture, or
excessive humidity.
2. Do not install or place this unit in a built-in
cabinet, or other conned space without
adequate ventilation.
3. To prevent risk of electrical shock or re
hazard, due to overheating do not obstruct
unit’s ventilation openings.
4. Do not install near any source of heat,
including other units that may produce heat.
5. Do not place unit near ames.
6. Only clean unit with a dry cloth.
7. Unplug unit during lightening storms or when
not used for an extended period of time. A
surge protector is strongly recommended.
8. Protect the power cord from being walked on
or pinched, particularly at the plugs.
9. Use unit only with accessories specied by
the manufacturer.
10. Refer all servicing to qualied personnel.
CAUTION
HDMI is a very complex technology requiring continuous authentication of the signal and the same
video resolution and audio settings on all electronic equipment in the system. When there are multiple
sources and displays, the video resolution and audio setting on all connected units must be adjusted
to correspond with that of the display having the lowest video and audio capability.
WARNING
DEAR CUSTOMER
Thank you for purchasing this product.
For optimum performance and safety, please
read these instructions carefully before connecting, operating or
adjusting this product. Please keep this manual for future reference.
This product is 100% inspected and tested in the United States to verify
HDMI performance parameters.
800.626.6445 3
INTRODUCTION
The Evolution EVSP1013 is a HDMI splitter that allows for 1 HDMI input to be split and sent to 4 different displays. The
3-UTP output ports can connect to the EVRX2006 POE receiver (sold Separately) over Cat5e/6 cable to transmit 1080p60
video with audio and control up to 50m. The single HDMI output can be used for a local display or cascaded into another
splitter for an even larger distribution system. It supports 20k - 60K wideband bi-direction IR communication and dynamic or
manual EDID management. The user can manually select the best compatible EDID or automatically blend EDID of 4 connected
HDMI sinks. It also provides power over the Cat5e/6 so that the EVRX2006 do not require a power supply.
FEATURES
HDMI® 1x3 Splitter over Cat5e/Cat6 Cable with Additional HDMI® output
Part # EVSP1013
• Allows for 1 HDMI input to be split and sent to 4 different displays
• (3) RJ45 output ports with POE Functionality can connect to the EVRX2006 POE receiver (sold
separately) over Cat5e/6 cable to transmit 1080p @60Hz video with audio and control up to 164 ft/50m
• Power over the Cat5e/Cat6 so that the EVRX2006 receivers do not require a power supply
• Features an additional HDMI output which can be used for a local display or to cascade to another
splitter for a larger distribution system
• Supports 20-60KHZ wideband bi-direction IR communication
• Dynamic or manual EDID management. The user can manually select the best compatible EDID or
automatically blend EDID of 4 connected HDMI sinks.
• Supports multiple audio formats including Dolby True HD, DTS-master, etc.
• Supports all 3D Signal Formats
• Supports manual or dynamic EDID management
• HDCP2.0 compatible
• Dimensions: 8.1” W x 1” H x 3.5” D


Product specificaties

Merk: Evolution
Categorie: Receiver
Model: EVSP1013

Heb je hulp nodig?

Als je hulp nodig hebt met Evolution EVSP1013 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Evolution

Handleiding Receiver

Nieuwste handleidingen voor Receiver