ETC Source Four LED Series 2 Handleiding

ETC Niet gecategoriseerd Source Four LED Series 2

Lees hieronder de 📖 handleiding in het Nederlandse voor ETC Source Four LED Series 2 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/8
E T C Q u i c k G u i d e
Source Four LED™ Profile
Source Four LE D Pr o fi le Page 1 of 8 Ele ctron i c T h eat r e Cont rol s , I nc.
Corporate Headquarters
3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA
Tel +608 831 4116
Fax +608 836 1736
London, UK
Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK
Tel +44 (0)20 8896 1000
Fax +44 (0)20 8896 2000
Rome, IT
Via Pieve Torina, 48, 00156 Rome, Italy
Tel +39 (06) 32 111 683
Fax +44 (0) 20 8752 8486
Holzkirchen, DE
Ohmstrasse 3, 83607 Holzkirchen, Germany
Tel +49 (80 24) 47 00-0
Fax +49 (80 24) 47 00-3 00
Hong Kong
Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong
Tel +852 2799 1220
Fax +852 2799 9325
Service:
(Americas) service@etcconnect.com
(UK) service@etceurope.com
(DE) techserv-hoki@etcconnect.com
(Asia) service@etcasia.com
Web:
www.etcconnect.com
Copyright © 2014 ETC. All Rights Reserved.
Product information and specifications subject to change.
7460M1300-1.7.0
Rev A
Released 2014-12
ETC intends this document to be provided in its entirety.
Ov er vi ew
For complete information and step-by-step instructions, see the Source Four LED Profile User Manual.
ETC documentation can be downloaded at www.etcconnect.com.
Accessory
holder
Yoke
Accessory
retainer
Yoke
locking knob
Safety cable
loop
LCD
DMX Thru
DMX In
Keypad
Power In
Power Thru
Status
indicators
Light Bulb
Home
Back
Up
Enter
Down
Power – Indicates AC power is On.
DMX – Indicates control signal is Active.
Error – Indicates data error, high temperature, or other unusual status.
E T C S o u r c e F o u r L E D Q u i c k G u i d e
Install
Source Four LE D Pro fi le Page 2 of 8 El ect ron i c The a tre C ont rols , I nc.
I ns tall
Len s Tube
Step 1: Slide the lens tube into the shutter barrel.
Step 2: Tighten the lens zoom knob.
Step 3: Tighten the Phillips screw at the top of the lens barrel.
In s ta ll Fi xtu re
Step 1: Hang or mount the fixture.
Step 2: Attach a safety cable.
Step 3: Insert additional accessories such as a top hat, etc.
W A R N I N G :
Use only hardware rated for total weight of fixture and accessories.
A safety cable (or other approved safety device) must be securely attached to
the safety cable loop before loosening the clamp.
Disconnect the unit from power and DMX and allow the fixture to cool before
removing or installing the shutter barrel or other adapters, and all cleaning and
maintenance.
Low clearance position
General use position
E T C S o u r c e F o u r L E D Q u i c k G u i d e
Connect
Source Four LE D Pro fi le Page 3 of 8 El ect ron i c The a tre C ont rols , I nc.
C o n n e c t
Step 1: Attach the power cable to the Power In connector.
Step 2: Attach the 5-pin XLR cable to the DMX In connector (if using external control).
Step 3: Connect the power cable to AC power.
Step 4: Plug the XLR cable (if using) into the data source.
Step 5: Link additional fixtures via Power Thru and DMX Thru connectors.
F o c u s
Step 1: Supply power and wait for the fixture to boot up.
Step 2: Press [ ] to open the Presets & Sequences menu.
Step 3: Select Focus and press [ ] to turn on the LED array.
Step 4: Adjust the fixture to the desired position.
Step 5: Once focus is set, press [ ] to turn off the LED array and then [ ] to return to home
screen.
W A R N I N G :
No more than nine total Source Four LED (four total Series 2 Lustr) fixtures on
Power Thru (non-dimming, 100 to 240 VAC, 50/60 Hz)
Up to 32 device loads can be on one DMX daisy-chain.
W A R N I N G :
The fixture must be connected to a non-dimmable power source in order to
avoid damage to its internal power supply and other electrical components.
Dimming will damage the fixture and void the warranty.
Power In
Power Thru
DMX In
DMX Thru

Product specificaties

Merk: ETC
Categorie: Niet gecategoriseerd
Model: Source Four LED Series 2

Heb je hulp nodig?

Als je hulp nodig hebt met ETC Source Four LED Series 2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd ETC

ETC

ETC Fos/4 Panel Handleiding

6 September 2023
ETC

ETC Desire D60X Handleiding

6 September 2023
ETC

ETC Source 4WRD II Handleiding

6 September 2023
ETC

ETC Source Four Fresnel Handleiding

6 September 2023
ETC

ETC Source 4WRD Handleiding

6 September 2023
ETC

ETC Source Four LED Series 2 Handleiding

6 September 2023
ETC

ETC Desire D60XTI Handleiding

6 September 2023
ETC

ETC Desire D40XT Handleiding

6 September 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Cherry

Cherry SPOS G86-61411 Handleiding

17 November 2024
Cherry

Cherry MX Board 8.0 Handleiding

17 November 2024
Cherry

Cherry Advanced Performance Line G81-8904 Handleiding

17 November 2024
Air Guard

Air Guard AG-1600 Handleiding

17 November 2024
Leviton

Leviton 41089-4WP Handleiding

17 November 2024
Livarno Lux

Livarno Lux IAN 74336 Handleiding

17 November 2024
Livarno Lux

Livarno Lux IAN 277515 Handleiding

17 November 2024
Livarno Lux

Livarno Lux IAN 114812 Handleiding

17 November 2024
Livarno Lux

Livarno Lux IAN 292286 Handleiding

17 November 2024
Livarno Lux

Livarno Lux IAN 291521 Handleiding

17 November 2024