ESYLUX MD-FLAT 360i/8 Handleiding

ESYLUX Bewegingsdetector MD-FLAT 360i/8

Lees hieronder de πŸ“– handleiding in het Nederlandse voor ESYLUX MD-FLAT 360i/8 (18 pagina's) in de categorie Bewegingsdetector. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/18
1
MA00744003
ESYLUX GmbH | An der Strusbek 40
22926 Ahrensburg | Germany
info@esylux.com | www.esylux.com
Detailed operating instructions
MD-FLAT 360i/8 RW
EP10427886
MD-FLAT 360i/8 SW
EP10427893
MD-FLAT 360i/8 RB
EP10428074
MD-FLAT 360i/8 SB
EP10428081
MD-FLAT-E 360i/8 RW
EP10428548
MD-FLAT-E 360i/8 RW GST
EP10427862
MD-FLAT-L 360i/8 RW
EP10428609
OPERATING INSTRUCTIONS
2 / 18
GB
MD-FLAT 360i/8 RW MD-FLAT 360i/8 SB MD-FLAT-L 360i/8 RW
MD-FLAT 360i/8 SW MD-FLAT-E 360i/8 RW
MD-FLAT 360i/8 RB MD-FLAT-E 360i/8 RW GST
Table of contents
1 Description 3
2 Safety instructions 3
3 Operation / functionality 4
3.1 Conditions in which the lighting is switched on 4
3.2 Conditions in which the lighting is switched off 4
3.3 Switching delay – not in pulse mode 4
4 Installation / connection 5
4.1 Masking the field of detection 7
5 Activation 7
5.1 Overview of factory settings 7
6 Settings 8
6.1 Control via external β€œS” button 8
6.2 Configuring parameters via remote control 8
6.3 Mobil-PDi/MDi 8
6.4 Mobil-PDi/MDi temporary settings 9
6.5 Programming the Mobil-PDi/MDi 10
6.6 Mobil-PDi/MDi-universal 12
6.7 Mobil-PDi/MDi-universal temporary settings 12
6.8 Programming the Mobil-PDi/MDi-universal 13
7 Technical data 16
8 Troubleshooting 16
8.1 Maintenance 17
8.2 Cleaning 17
9 ESYLUX Manufacturer’s guarantee 18
OPERATING INSTRUCTIONS
3 / 18
GB
MD-FLAT 360i/8 RW MD-FLAT 360i/8 SB MD-FLAT-L 360i/8 RW
MD-FLAT 360i/8 SW MD-FLAT-E 360i/8 RW
MD-FLAT 360i/8 RB MD-FLAT-E 360i/8 RW GST
1 Description
The ESYLUX ceiling-mounted motion detector is a passive infrared presence detector
that responds to moving heat sources, such as people walking.
The motion detector is designed for areas with low levels of natural light, such as
hallways, cellars, staircases, changing rooms, toilets, garages etc.
Parameters can be configured using the ESYLUX Mobil-PDi/MDi and Mobil-PDi/MDi-
universal remote controls as well as via the manual setting elements.
Note: Use this product only as intended (as described in the user instructions).
The device must not be changed, modified or painted – doing so will void any warranty
claims. You must check the device for damage immediately after unpacking it.
If there is any damage, you should not install the device under any circumstances.
If you suspect that safe operation of the device cannot be guaranteed, you should turn
the device off immediately and make sure that it cannot be operated unintentionally.
2 Safety instructions
β€’ Work on the 230-V power system must be carried out by authorised personnel only,
with due regard to the applicable installation regulations/standards
β€’ Switch off the power supply before installing the system
β€’ On the input side, the device is to be protected against short circuits with a 10-A circuit
breaker
β€’ Protection type IP 20 for interior use


Product specificaties

Merk: ESYLUX
Categorie: Bewegingsdetector
Model: MD-FLAT 360i/8
Kleur van het product: Wit
Gewicht: 830 g
Diepte: 6 mm
Hoogte: 6 mm
Materiaal behuizing: Polycarbonaat (PC)
Internationale veiligheidscode (IP): IP20
Connectiviteitstechnologie: Bedraad
Montagewijze: Plafond
Certificering: CE , RoHS , WEEE
Ingangsspanning: 230 V
Frequentie: 50 Hz
Stroomverbruik (typisch): 0.3 W
Bedrijfstemperatuur (T-T): 0 - 50 Β°C
Relatieve vochtigheid in bedrijf (V-V): 5 - 93 procent
Detectie hoek: 360 Β°
Installatie hoogte (min): 2.5 m
Installatie hoogte (max): 5 m
Lichtgevoeligheid: 2000 Lux

Heb je hulp nodig?

Als je hulp nodig hebt met ESYLUX MD-FLAT 360i/8 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewegingsdetector ESYLUX

Handleiding Bewegingsdetector

Nieuwste handleidingen voor Bewegingsdetector