Ergotron ZGBCG Handleiding

Ergotron Niet gecategoriseerd ZGBCG

Lees hieronder de 📖 handleiding in het Nederlandse voor Ergotron ZGBCG (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

A S S E M B LY I N S T R U C T I O N S

Anthro Corporation® | 10450 SW Manhasset Dr. | Tualatin, OR 97062

Toll-free: 800.325.3841 | Fax: 800.325.0045 | email: sales@anthro.com | anthro.com

Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.2409

Zido™ Glove Box Holder

May 2007, Rev A

NOTE: The Zido cart (shown shaded) is not included.

Product Part#

Zido Glove Box Holder ZGBCG

WELC O ME

Thank you for purchasing your

Zido Glove Box Holder!

If you have any questions or if we

can help you in any way, please

PARTS L IST

Before beginning assembly of your Zido Glove Box Holder,

please review the parts list to verify that your shipment is

complete.

A 5/32" hex head driver (provided with your Zido cart) is

required for this assembly.

Glove Box Holder Quantity Part Number

01 Glove Box Body 1 225-2629-00

02 Self-threading Screw 2 325-5464-00

01 02

ZidoTM Glove Box Holder Assembly Instructions 3

STEP 1

Select an Installation Point

¡ Select an installation point for your Glove Box. If you will install over a Shelf Bracket, go to Step 3. If you will install onto

the Zido tube, go to Step 2.

STEP 3

Install the Holder over a Shelf/Bin Bracket

¡ While one person holds the Shelf or Bin in place,

another person carefully removes the fasteners from

the Shelf Bracket and sets them aside.

¡ Align the holder over the bracket.

¡ Secure using the three self-threading fasteners.

STEP 2

Install the Holder onto the Zido tube

¡ Align the holes on the Glove Box Holder with the

holes on the Zido tube.

¡ Secure using two self-threading fasteners.

Note: These fasteners are cutting the threads in the

tube, so the ﬁrst few turns will require some force.

Congratulations! Your assembly is complete!

CONGRATULATIONS! YOUR GLOVE BOX HOLDER ASSEMBLY IS COMPLETE!

Product specificaties

Merk:	Ergotron
Categorie:	Niet gecategoriseerd
Model:	ZGBCG
Kleur van het product:	Grijs
Gewicht:	1400 g
Breedte verpakking:	355 mm
Diepte verpakking:	100 mm
Hoogte verpakking:	150 mm
Materiaal behuizing:	Metaal
Platform:	mounting holder
Land van herkomst:	Verenigde Staten
Materiaal:	Metaal
Afmetingen (B x D x H):	290 x 115 x 90 mm
Extra accessoires:	2 screws