EPH Elektronik DLR 24/05/M Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor EPH Elektronik DLR 24/05/M (19 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/19
Stand: Juni 2009
Z 319 engl.
Technical specification
4-Q-motor control unit digital type DLR 24/xx - 466
Table of contents
1. Brief instruction DLR24/xx-466 with 19-pin spring clamp terminal
2. General information
2.1 Technical features
2.2 Accessories
3. Technical data
4. Connection
4.1 Control connections
4.2 Connection plan
5. Setting parameters
5.1 Overview DIP switch
6. Scale drawings
6.1 DLR 24/xx/P
6.2 DLR 24/xx/M
6.3 DLR 24/xx/G
7. Notes and recommendations on using EPH motor control cards
7.1 Delivery
7.2 Installation, launch and safety measures
7.3 EMC measures
7.4 Low voltage directive 73/23 EEC
7.5 Motors with capacity fault clearance
8. Manufacturer’s declaration
Copyright © EPH-Elektronik GmbH. All rights reserved. We claim property rights and
copyright. It may be duplicated or used in any other way with our express confirmation
only.
Technical data with reservation of technical changes.
Stand: Juni 2009
Z 319 engl.
Stand: Juni 2009
Z 319 engl.
1. Brief instruction DLR 24/xx - 466 with 19-pin spring clamp terminal
1. Select modes:
• put jumper 1 on 1-2 for internal reference value (potentiometer 1) or on 2-3 for
external reference.
• put jumper 2 on 1-2 for reference value max. 5V (important for internal
reference value) or on 2-3 for 10V target value input.
• put jumper 3 on 1-2 for 12V motor or on 2-3 for 24V motor.
• put DIP switch 1 and 2 ON for inverted enables (no need of connecting terminal
15, 16 und 18)
• put DIP switch 3 to 8 Off
2. Turn potentiometer 2 (Imax) for current limitation to the right position.
3. Potentiometer 3 (IxR) compensation to left position.
4. Connection of the control wires see Connection plan, page 5.
5. Connect DC motor to terminals 3 and 4.
6. Connect power supply to terminal 1 Plus (ca. 10 – 36V DC), on terminal 2 GND.
7. Now turn on power supply.
8. LED green (power on) illuminates on the pcb.
9. With potentiometer 1 (n ref) the target value for motor speed can be adjust from 0
to 100%, if jumper 1 was put on 1-2.
10. Motor direction can be changed witch a voltage (5 – 36V DC) on terminal 19 (e.g.
bridge from clamp 17 to 19)


Product specificaties

Merk: EPH Elektronik
Categorie: Niet gecategoriseerd
Model: DLR 24/05/M

Heb je hulp nodig?

Als je hulp nodig hebt met EPH Elektronik DLR 24/05/M stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd EPH Elektronik

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd