Epcom X67-R Handleiding

Epcom Niet gecategoriseerd X67-R

Lees hieronder de 📖 handleiding in het Nederlandse voor Epcom X67-R (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Operation and Maintenance

To be able to manipulate the equipment, it is necessary to connect

the harness of the lightbar with the harness of the X303 controller,

making sure they are correctly connected until a click is heard.

It is recommended to periodically check the mounting bolts to

avoid any accidents.

Use mild soap and a soft cloth to clean the plastic

covers.

Note: Do not use gasoline or other organic solvents to clean the

plastic cover, otherwise they will crack or become opaque.

Content

•Lightbar X67RB 1 Pz

• Controller X 1 Pz 303

• 1 Pz Hook Mount

We are not responsible:

1) .Hits or scratches during use

2) If they use the wrong voltage.

3) By using a chemical to perform some maintenance

and / or cleaning of the equipment.

User Manual

Lightbar

X67RB

INTRODUCTION

Thank you for choosing our lightbar, which managesX67RB

70 Brilliant LED Gen III (Generation III); In order to meet your

needs and ensure excellent performance.

The X67RB lightbar, handles the highest LED technology, high

brightness, low power consumption and long service life.

Please read the manual before installing the lightbar, toX67RB

avoid damage due to improper use.

Technical Data

• Voltage: 12VDC

• Co : 12 A Max nsumption

• -40 55°C Temperature：～

• : 13 Flash Patterns

• Dim sions: 1en 18cm x 34cm x 12cm

Power Supply Connnection

• Red Cable: VCC

• Black Cable: GND

C X 3 ontroller 30

Selector 1.- 4 : Has positions

1. Lightbar OFF

2. Turn on 1 red module and 1 blue module both from

the rear.

3. Turn on 1 red module and 1 blue module on the front;

2 red modules and 2 blue modules on the back.

4. They light 2 red modules and 2 blue modules on the front;

3 red modules and 3 blue modules on the back of the bar.

Switch 1.- Allows changing the type of lights pattern.

Switch 2.- It allows to light the left alleyway light.

Switch 3.- It allows to turn on the penetration lights.

Switch 4.- It allows to light the right alleyway light.

Selector 2.- This selector allows you to manipulate the Signal

master of the lightbar, it has 4 positions:

1. Sig l Master Turn OFF na

2. Addressing from right to left

3. Addressing from left to right

4. Addressing the center out

Product specificaties

Merk:	Epcom
Categorie:	Niet gecategoriseerd
Model:	X67-R
Breedte:	1180 mm
Diepte:	340 mm
Hoogte:	120 mm
Aantal lampen:	70 lampen
Soort lamp:	LED
Stroom:	12 A
Type stroombron:	DC
DC voltage input:	16 V
Aantal:	1
Bedrijfstemperatuur (T-T):	-40 - 55 °C
Type product:	Lichtbalk
Aantal lichteffecten:	13