Epcom X6465R Handleiding

Epcom Niet gecategoriseerd X6465R

Lees hieronder de 📖 handleiding in het Nederlandse voor Epcom X6465R (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 72 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

ECCO’s 6465 Series is a low prole LED beacon with a long,

maintenance-free service life. 6465 Series beacons are ideal for

industrial vehicle applications and feature a

12-80 VDC operating range.

Page 1 of 2

1. Proper installation combined with operator training in the use, care, and maintenance of emergency warning devices are essential to ensure

the safety of you and those you are seeking to protect.

2. Exercise caution when working with live electrical connections.

3. This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause high current arcing,

which can cause personal injury and/or severe vehicle damage, including re.

4. Proper placement and installation are vital to the performance of this warning device. Install this product so that output performance of the

system is maximized and the controls are placed within convenient reach of the operator so that s/he can operate the system without losing

eye contact with the roadway.

5. Do not install this product or route any wires in the deployment area of an air bag. Equipment mounted or located in an air bag deployment

area may reduce the effectiveness of the air bag or become a projectile that could cause serious personal injury or death. Refer to the

vehicle owner’s manual for the air bag deployment area. It is the responsibility of the user/operator to determine a suitable mounting location

ensuring the safety of all passengers inside the vehicle particularly avoiding areas of potential head impact.

6. It is the responsibility of the vehicle operator to ensure during use that all features of this product work correctly. In use, the vehicle operator

should ensure the projection of the warning signal is not blocked by vehicle components (i.e., open trunks or compartment doors), people,

vehicles or other obstructions.

7. The use of this or any other warning device does not ensure all drivers can or will observe or react to a warning signal. Never take the right-

of-way for granted. It is your responsibility to be sure you can proceed safely before entering an intersection, driving against trafc, respond-

ing at a high rate of speed, or walking on or around trafc lanes.

8. This equipment is intended for use by authorized personnel only. The user is responsible for understanding and obeying all laws regarding

warning signal devices. Therefore, the user should check all applicable city, state, and federal laws and regulations. The manufacturer as-

sumes no liability for any loss resulting from the use of this warning device.

Do not install and/or operate this safety product unless you have read and understand the safety information

contained

Failure to install or use this product according to manufacturer’s recommendations may result in property damage, serious injury, and/or death to

those you are seeking to protect!

WARNING!

Specications:

Size: Permanent Mount W: 5.1” x H: 4.2”

Magnet Mount W: 5.1” x H: 4.3”

Weight: Permanent Mount 0.6 lb.

Magnet Mount 1.6 lb.

Voltage: Model 6465X 12-80 VDC systems

Model 6465X-MG 12-24 VDC systems

Current Draw: 100 mA

Flash Rate: Pulse 8 ash mode: 85 FPM

WARNING!

Maximum recommended vehicle speed for safe operation using

the Magnet Mount model is 65 mph (104 km/h) on a well main-

tained road, when tted to the center of a vehicle roof of steel con-

struction. Higher speeds could cause the mount to fail, resulting

in the beacon ying off of the vehicle, which could cause damage

to other vehicles and injury or death to the passengers.

The magnet mount is not intended as a permanent mounting for the

beacon. The magnet mount unit must be mounted on a magnetic sur-

face (i.e. no berglass, etc.). Insure that the magnet is kept clean.

Installation & Mounting:

Carefully remove the beacon and place it on a at surface. Ex-

amine the unit for transit damage, broken lenses, etc. If damage

is found, contact the transit company or distributor. Do not use

damaged or broken parts.

Mounting:

Permanent, Model 6465

Position the unit in the desired mounting location. Using the base

as a template, mark the mounting hole locations. Drill three 3/16”

mounting holes, and drill one hole for power wire routing. The use of

a grommet is recommended for wires passing through compartment

walls. Mount the beacon using #10 hardware.

Installation and Operation Instructions

6465 LED Beacon

Important! This unit is a safety device, and it must be connected to its own

separate, fused power point to assure its continued operation should any

other electrical accessory fail.

920-0166-00 Rev. E Page 2 of 2

Mounting:

Temporary, Model 6465-MG

Model 6465-MG comes complete with a magnet, a fteen foot cord and a

cigarette lighter plug. A magnet mount kit is also available for Model 6465.

Note: These units are not sealed on the bottom. For operation in

an extremely moist environment or as added protection against

moisture, sealing the wire exit hole on the bottom with a pliable

caulking material is

recommended.

Note: Operating the vehicle without the lens installed on the

product may result in damage that will NOT be covered under

warranty.

Wiring:

The wiring for this conguration is as shown in Figure 1 below. The positive

line must have a 3 amp fuse, as shown. A switch may be used to control the

on/off function.

RED WIRE

SWITCH

(USER SUPPLIED)

FUSE (3 AMP)

(USER SUPPLIED)

BATTERY

GROUND GROUND

BLACK WIRE

FIGURE 1

Replacement Parts:

Description Part No.

Lens: Amber R6400LA

Blue R6400LB

Clear R6400LC

Green R6400LG

Red R6400LR

CAUTION: HIGH VOLTAGE. Before servicing light, turn

“OFF” power and wait ve minutes.

Manufacturer Limited Warranty and Limitation of Liability:

Manufacturer warrants that on the date of purchase, this product will conform to Manufacturer’s specications for this product (which are available from the Manufacturer

upon request). This Limited Warranty extends for thirty-six (36) months from the date of purchase.

DAMAGE TO PARTS OR PRODUCTS RESULTING FROM TAMPERING, ACCIDENT, ABUSE, MISUSE, NEGLIGENCE, UNAPPROVED MODIFICATIONS, FIRE OR

OTHER HAZARD; IMPROPER INSTALLATION OR OPERATION; OR NOT BEING MAINTAINED IN ACCORDANCE WITH THE MAINTENANCE PROCEDURES SET

FORTH IN MANUFACTURER’S INSTALLATION AND OPERATING INSTRUCTIONS VOIDS THIS LIMITED WARRANTY.

Exclusion of Other Warranties:

MANUFACTURER MAKES NO OTHER WARRANTIES, EXPRESSED OR IMPLIED. THE IMPLIED WARRANTIES FOR MERCHANTABILITY, QUALITY OR FITNESS

FOR A PARTICULAR PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE ARE HEREBY EXCLUDED AND SHALL NOT APPLY

TO THE PRODUCT AND ARE HEREBY DISCLAIMED, EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ORAL STATEMENTS OR REPRESENTA-

TIONS ABOUT THE PRODUCT DO NOT CONSTITUTE WARRANTIES.

Remedies and Limitation of Liability:

MANUFACTURER’S SOLE LIABILITY AND BUYER’S EXCLUSIVE REMEDY IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR UNDER ANY OTHER THEORY

AGAINST MANUFACTURER REGARDING THE PRODUCT AND ITS USE SHALL BE, AT MANUFACTURER’S DISCRETION, THE REPLACEMENT OR REPAIR OF

THE PRODUCT, OR THE REFUND OF THE PURCHASE PRICE PAID BY BUYER FOR NON-CONFORMING PRODUCT. IN NO EVENT SHALL MANUFACTURER’S

LIABILITY ARISING OUT OF THIS LIMITED WARRANTY OR ANY OTHER CLAIM RELATED TO THE MANUFACTURER’S PRODUCTS EXCEED THE AMOUNT PAID

FOR THE PRODUCT BY BUYER AT THE TIME OF THE ORIGINAL PURCHASE. IN NO EVENT SHALL MANUFACTURER BE LIABLE FOR LOST PROFITS, THE

COST OF SUBSTITUTE EQUIPMENT OR LABOR, PROPERTY DAMAGE, OR OTHER SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES BASED UPON

ANY CLAIM FOR BREACH OF CONTRACT, IMPROPER INSTALLATION, NEGLIGENCE, OR OTHER CLAIM, EVEN IF MANUFACTURER OR A MANUFACTURER’S

REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. MANUFACTURER SHALL HAVE NO FURTHER OBLIGATION OR LIABILITY

WITH RESPECT TO THE PRODUCT OR ITS SALE, OPERATION AND USE, AND MANUFACTURER NEITHER ASSUMES NOR AUTHORIZES THE ASSUMPTION

OF ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH SUCH PRODUCT.

This Limited Warranty denes specic legal rights. You may have other legal rights which vary from jurisdiction to jurisdiction. Some jurisdictions do not allow the exclu-

sion or limitation of incidental or consequential damages.

La serie 6465 de ECCO es una baliza LED de bajo perl con un servicio

prolongado, libre de mantenimiento. Las balizas de la serie 6465 son

ideales para aplicaciones en vehículos industriales y ofrecen un rango

operativo de 12 a 80 V CC.

1. Para garantizar su seguridad y la de todos aquellos a los que desea proteger, es importante que exista una adecuada

instalación, así como también una capacitación de los operadores para el uso, el cuidado y el mantenimiento de los

dispositivos de alerta de emergencias.

2. Opere con precaución cuando trabaje con conexiones eléctricas en tensión.

3. El producto deber conectarse a tierra adecuadamente. Una conexión incorrecta o cortocircuito en las conexiones

eléctricas puede ocasionar arcos de alta tensión lo que, a su vez, puede producir heridas o daños a su vehículo y fuego

inclusive.

4. Para un buen desempeño del dispositivo de alerta, es de vital importancia que exista una instalación y una ubicación

adecuadas. Instale este producto de modo que el rendimiento del sistema se maximice y los controles se ubiquen al

alcance del operador, de esta manera éste podrá operar el sistema sin perder el contacto visual de la calzada.

5. No instale el producto o je algún cable en el área de despliegue de la bolsa de aire. Los equipos que se instalen o se

coloquen en el área de despliegue de la bolsa de aire pueden reducir la efectividad de la bolsa, o convertirse en un

proyectil que puede ocasionar heridas e incluso la muerte. Consulte el manual de usuario del vehículo acerca del área

de despliegue de la bolsa de aire. Es responsabilidad del usuario/operador determinar una ubicación adecuada para la

instalación, con el n de garantizar la seguridad de todos los pasajeros dentro del vehículo y evitar particularmente las

potenciales áreas de impacto de la cabeza.

6. Es responsabilidad del operador del vehículo asegurarse de que todas las características del producto funcionen

correctamente durante su operación. Durante su operación, el operador del vehículo debe asegurarse de que la

proyección de las señales de alerta no se encuentre bloqueada por componentes propios del vehículo (es decir, baúles

o puertas abiertas), personas, vehículos u otras obstrucciones.

7. El uso de este o cualquier otro dispositivo de alerta no garantiza que todos los conductores puedan observar o

reaccionar a las señales de advertencia. Nunca subestime el derecho de paso. Es su responsabilidad asegurarse de que

pueda proceder con seguridad antes de ingresar en una intersección, conducir en contra del tráco o a alta velocidad, y

caminar por o alrededor de carriles de circulación.

8. Este equipo debe operarse solo por personal autorizado. El usuario es responsable de comprender y obedecer todas

las leyes con respecto a los dispositivos de señales de alerta. Por lo tanto, el usuario debe revisar todas las leyes y

regulaciones aplicables tanto las correspondientes a la ciudad como las estatales y federales. El fabricante no asume

ninguna responsabilidad por la pérdida como resultado del uso del dispositivo de alerta.

No instale u opere este producto de seguridad a menos que haya leído y comprendido la información de seguridad

que contiene este manual.

¡ADVERTENCIA!

En caso de no instalar ni utilizar este producto conforme a las sugerencias del fabricante se podrían ocasionar daños a la

propiedad, lesiones graves personales o el deceso del usuario y de las personas que se busca proteger.

Especicaciones:

Tamaño Montaje permanente An: 13 cm (5,1 pulg.) x Al: 4.2"

Montaje magnético An: 13 cm (5,1 pulg.) x Al: 4.3"

Peso: Montaje permanente 272 g. (0,6 libras)

Montaje magnético 725 g. (1,6 libras)

Tensión: Modelo 6465X, sistemas de 12 a 80 V CC

Modelo 6465X-MG sistemas de 12 a 24 VCC

Consumo de corriente: 100 mA

Velocidad de destello: Modo de intermitencia de Pulse 8: 85 FPM

¡ADVERTENCIA!

La velocidad máxima sugerida para el vehículo para un uso seguro del

modelo con montaje magnético es de 65 mph (104 km/h) en una ruta bien

mantenida, cuando está colocada en el centro del techo de un vehículo de

construcción de acero. Las velocidades más elevadas podrían hacer fallar el

montaje desprendiendo la baliza del vehículo, lo cual podría ocasionar daños

a otros vehículos y lesiones o el deceso de los pasajeros.

El montaje magnético no está diseñado para ser un montaje permanente para

la baliza. La unidad con montaje magnético debe colocarse sobre una supercie

magnética (es decir, que no sea de bra de vidrio, etc.). Asegúrese de que el imán se

mantenga limpio.

Página 1 de 3

Instrucciones de instalación y uso,

baliza LED 6465

Product specificaties

Merk:	Epcom
Categorie:	Niet gecategoriseerd
Model:	X6465R
Kleur van het product:	Black, Red
Aantal lampen:	3 lampen
Soort lamp:	LED
Type stroombron:	DC
DC voltage input:	12 - 80 V
Certificering:	SAE J845 Class III
Aantal:	1
Bedrijfstemperatuur (T-T):	-30 - 50 °C
Type product:	Beacon
Aantal lichteffecten:	1
Diffusor kleur:	Rood