Entes MPR-14S-M3609 Handleiding

Entes Meetapparatuur MPR-14S-M3609

Lees hieronder de 📖 handleiding in het Nederlandse voor Entes MPR-14S-M3609 (20 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

Index

SAFETY AND WARNING ................................................................................................................................ 2

Attention .................................................................................................................................................. 2

Safety ....................................................................................................................................................... 3

Guarantee ................................................................................................................................................ 3

OPERATING CONDITIONS ............................................................................................................................. 4

INTRODUCTION ............................................................................................................................................ 5

General Specifications ................................................................................................................................. 5

Applications 6 ..............................................................................................................................................

MPR-1 Product Family 6 .............................................................................................................................

Appearance and Interface 7 .......................................................................................................................

Terminals ...................................................................................................................................................... 7

Front Panel ................................................................................................................................................... 7

Terminal Structures 8 ..................................................................................................................................

CONNECTION ............................................................................................................................................. 12

3P4W (Three-Phase Four-Wire) Connection .........................................................................................12

3P3W (Three-Phase Three-Wire) Connection .......................................................................................13

ARON Connection .................................................................................................................................. 13

3P4W BLN (Three-Phase Four-Wire Balanced) Connection ..................................................................14

3P3W BLN (Three-Phase Three-Wire Balanced) Connection . ................................................................ 14

Communication Line Termination Resistance ....................................................................................... 15

OPERATING DEVICE .................................................................................................................................... 16

Device Communication Settings………………………………………………………………………………………………..…… …... 16

TECHNICAL INFORMATION AND ATTACHMENTS………………………………………………………………………………….17

Technical Information…………………………………………………………………………………………………………………………..17

Standards………………………………………………………………………………………………………… ………………………………….. 19

MPR-1 SERIES NETWORK ANALYZER

OPERATING MANUAL

SAFETY AND WARNING

Attention

If the following instructions are not carefully followed, the circumstances which can

cause death and serious injuries might happen.

 The installation of the device must be performed by the qualied and trained

personnel.

 Please, cut the whole power while installing the device. Please, use a suitable

circuit breaker on the installation terminal.

 You must connect the power lead-ins of the device by using a current

transformer. Do not apply direct current connection.

 Never, remove the front panel while the device is connected to the mains.

 Never, clean the device by any solvent or similar material. Only use dry cloth for

cleaning it.

 Before, turning on the device, make sure that the connections are correct.

 Please, contact your authorized dealer in case of any problem with your device.

 The device is only for interior panel type assembly. electrical / re enclosure

Only the front panel of the device should be accessible from the switchboard.

 The fuse to be used must be CATIII and F type and the current limit value

should be 1A.

 Current measurement inputs must be connected with auxiliary current

transformers which have reinforced insulation.

 The power meter shall not be used for primary protection or applications where

its failure can cause harm or death.

 Please de-energize the device before replacing RTC backup battery. It must be

Li/MnO2 battery.

The manufacturer rm cannot be held responsible in any way for any circumstance

which might arise if the aforementioned precautions are not implemented

Safety

Please, read the entire operating manual before using the device.

 Connect a button or a circuit breaker between the mains and the supply inputs

of the device.

 The button or circuit breaker to be connected should be close to the device.

 It should be labeled that the button or circuit breaker to be connected will be

used for separating the device from the mains.

 This device is used for analyzing the electricity mains and it must not be used for

main protection function.

Guarantee

The guarantee term of the device is 2 (two) years. In case of any problem, the repair of

the device must be done only by the manufacturer rm; otherwise, the guarantee of the

device becomes invalid.

Manufacturer Firm

ENTES Elektronik Cihazlar Imalat ve Ticaret A.S.

Address: Dudullu OSB, 1. cadde, No:23 34776 Umraniye, Istanbul / TR.

Telephone: +90 (216) 313 0110

Fax: +90 (216) 314 1615

Product specificaties

Merk:	Entes
Categorie:	Meetapparatuur
Model:	MPR-14S-M3609

Heb je hulp nodig?

Als je hulp nodig hebt met Entes MPR-14S-M3609 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Meetapparatuur Entes

Entes MPR-25S-22 Handleiding

11 December 2023

Entes MPR-17S-23-M3608 Handleiding

11 December 2023

Entes MPR-24 Handleiding

11 December 2023

Entes MPR-16S-21-M3607 Handleiding

11 December 2023

Entes EMM-04CS Handleiding

11 December 2023

Entes MPR-14S-M3609 Handleiding

11 December 2023

Entes MPR-47S-96 Handleiding

23 Augustus 2023

Entes EPM-06-96 Handleiding

23 Augustus 2023

Entes EVM-3C-48 Handleiding

23 Augustus 2023

Entes MPR-45-96 Handleiding

23 Augustus 2023

Handleiding Meetapparatuur

Nieuwste handleidingen voor Meetapparatuur

Festo NEDY Handleiding

21 November 2024

Festo DFPD-10 Handleiding

21 November 2024

Dostmann Electronic RLD 380 Handleiding

20 November 2024

Milwaukee 2225-20 Handleiding

19 November 2024

Kübler Codix 542 Handleiding

19 November 2024

HT Instruments FULLTEST3 Handleiding

19 November 2024

Joy-it VM-433 Handleiding

18 November 2024

Joy-it VAM-10010 Handleiding

18 November 2024

Rotronic CP11 Handleiding

18 November 2024

Techno Line MA 10230 Handleiding

18 November 2024