Energenie Mi Home Click Handleiding

Energenie Smarth home Mi Home Click

Lees hieronder de 📖 handleiding in het Nederlandse voor Energenie Mi Home Click (1 pagina's) in de categorie Smarth home. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

In the Box:

- MiHome Click

- Battery, Already Fitted (1x CR2450)

- Double Sided Fixing Pad

- User Guide

Available Functions

- Single Click

- Double Click

- Long Click

Connecting the Battery

Before the MiHome Click is used for the ﬁrst time, remove

the battery cover (2) on the MiHome Click (if ﬁtted) by

carefully sliding apart, and remove the plastic tab (6).

Pairing via a Browser

1. Log into your MiHome account at mihome4u.co.uk.

2. Select Pair New Device from the mihome4u.co.uk/devices

3. Select the Click, followed by Pair Device and then follow

the onscreen pairing instructions, pressing the pairing button

(3) for 5-6 seconds when required. The pairing LED which

can be seen through the pairing LED view slot (9) will ﬂash

up to 5 times to indicate pairing mode.

4. Check the MiHome Click is now visible in the device list,

if not, repeat steps 2 and 3 as above.

Installation

1. Remove covering from one side of ﬁxing pad, and ﬁx into

square recess on rear of battery cover.

2. Mount the MiHome Click to desired location by removing

remaining covering from ﬁxing pad and pressing into place.

Note: Before ﬁxing into place, ensure that MiHome Click

communicates with the MiHome Gateway in the desired

position, and that the ﬁxing location is clean and dry.

Mi Home Click

Quick Start Guide

The MiHome Click is part of the MiHome home

automation range. This allows you to set three user

deﬁned conﬁgurable actions per MiHome Click device,

enabling you to control other compatible MiHome devices.

1 – MiHome Click 5 – Battery

2 – Battery cover 6 – Plastic tab

3 – Pairing button 7 – Locating tab

4 – Battery latch 8 – Pairing LED view

Pairing with the MiHome Gateway

Your MiHome Click needs to be paired with the MiHome

Gateway before it can be used. You must pair your

MiHome Click with the MiHome Gateway before installing

it. Please ensure that your device is in range of the Gateway

when you pair it. We suggest up to 10 metres, unobscured

by furniture or walls etc.

Safety

If you do not install and use in line with this guide the

warranty will become invalidated and we will not be liable

for any damage or loss whatsoever, including indirect loss,

damage to property or personal injury. You must only use

the product in dry areas indoors, and it must be protected

from moisture and water. Do not disassemble, other than

as described in the installation section of this user guide,

as it does not contain any parts to service. If it arrives faulty,

return it to where you bought it. Your statutory rights are not

aected

User Manual

Part no: MIHO089

Energenie and MiHome are brand names of Sandal Plc.

Oxon, OX26 6BW

Further Help

For more help, look online at

mihome4u.co.uk/troubleshooting and

www.energenie4u.co.uk where you can download a more

comprehensive user manual, or contact our helpful support

team in the UK via 08000 469 466 or

support@mihome4u.co.uk

Further contact methods can be found at:

https://energenie4u.co.uk/about_us/contact_us

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, Sandal Plc, T/a Energenie declares that the radio

equipment type MIHO089 MiHome Multi Sensor is in

compliance with Directive 2014/53/EU. The full text of the

EU declaration of conformity is available at the following

internet address: www.energenie4u.co.uk

Pairing via the App on your Smartphone

1. Log into your MiHome account on the MiHome App

(App available free on iOS or Google Play Store)

2. Select Add a new device from menu and choose Click.

3. Follow onscreen pairing instructions, pressing the

pairing button (3) for 5-6 seconds when required. The

pairing LED which can be seen through the pairing LED

view slot (9) will ﬂash up to 5 times to indicate pairing mode.

4. Check the MiHome Click is now visible in the device list,

if not, repeat steps 2 and 3 as above.

1 2

WARNING: NOT

SUITABLE FOR

CHILDREN

UNDER 36

MONTHS

Product specificaties

Merk:	Energenie
Categorie:	Smarth home
Model:	Mi Home Click
Kleur van het product:	Wit
Stroombron:	Batterij/Accu
Connectiviteitstechnologie:	Draadloos
Ondersteund aantal accu's/batterijen:	1
Frequentie:	434.3 MHz
Maximum outdoorbereik:	60 m
Bedrijfstemperatuur (T-T):	-20 - 40 °C
Type batterij:	CR2450