Energenie ENER008 Handleiding

Energenie Stekkerdoos ENER008

Lees hieronder de 📖 handleiding in het Nederlandse voor Energenie ENER008 (1 pagina's) in de categorie Stekkerdoos. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

PC – Automatic Standby Shutdown

Installation

InstallationInstallation

Installation (see picture

(see picture (see picture

(see picture):

): ):

a. Plug your Desk Computer and other office appliances such

as printers, monitors, scanners etc into any of the 4

controlledcontrolledcontrolledcontrolled sockets of the extension lead. Plug any device

requiring continuous power e.g. fax machine into the

always

alwaysalways

always-

-on

onon

on socket.

b. Stick the reset button conveniently on or near to your

computer.

First time set up

First time set up First time set up

First time set up –

––

– power learning

power learning power learning

power learning

c. Plug the extension lead into a mains wall socket and

switch ON.

d. The operating light should flash slowly for 3 seconds then

remain illuminated. (If it doesn’t, press the button on the

device for 4 seconds at least until the light starts flashing).

The device is now in power learning modepower learning modepower learning modepower learning mode.

e. Place all your connected devices into Standby and wait for

at least 30 seconds.

f. Then press the button on the device to end the learning

cycle. The light will turn off and the sockets are off.

----To turn ON the SocketsTo turn ON the SocketsTo turn ON the SocketsTo turn ON the Sockets: : : :

Press the reset button on the flying lead. The light on the Standby

Shutdown will illuminate indicating all the controlled sockets are

re-powered. Power up your computer system as usual. *

-To tur

To turTo tur

To turn OFF

n OFFn OFF

n OFF:

Power down your desk computer as normal. After 1 minute the

Standby Shutdown will automatically

automaticallyautomatically

automatically turn off the power to all the

controlled sockets.

Note

: You may also press the button on the front of the Standby

Shutdown device to re-enable the sockets.

SpecificationSpecificationSpecificationSpecification

Voltage: 240V~ 50Hz

Max .current: 13A

Max. load: 3kW

Colour: Black/White

Mains cable: 1.5m

Sensor cable: 1.3m

4 controlled sockets

1 always ON socket

Product code: ENER008

Power consumption in standby: <1W.

Note

: The Standby Shutdown will retain

its memory after a loss of power.

If you wish to change the number of

connected appliances you will need to re-

enter the power learning cycle. Press the

button on the front of the device for 4

seconds to clear the previously set power

level.

The indicator light will start flashing

ready. Then carry on from e.

Note

: The Standby Shutdown will retain

its memory after a loss of power.

Product specificaties

Merk:	Energenie
Categorie:	Stekkerdoos
Model:	ENER008
Kleur van het product:	Wit
Type stekker:	Type G
Snoerlengte:	1.5 m
Maximaal ingangsvermogen:	3000 W
Aan/uitschakelaar:	Ja
Ondersteuning voor plaatsing:	Binnen
Kleur kabel:	Wit
AC-ingangsspanning:	240 V
AC-ingangsfrequentie:	50 Hz
Aantal producten inbegrepen:	1 stuk(s)
Aantal AC uitgangen:	5 AC-uitgang(en)
Stroom (max.):	13 A