Endorphin.es Two Of Cups Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Endorphin.es Two Of Cups (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 199 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
ENDORPHIN.ES® – TWO OF CUPS
Module design by Andreas Zhukovsky
Collection Spring / Summer 2022
Endorphin.es are made in Barcelona, Spain
Follow, like, post and tag us at instagram:
@endorphin.es
WARRANTY
RTFM – be so kind and read the manual. It will provide you with the information you need to fully indulge the module you just purchased – for which we like to thank you.
Enjoy your sound experiences, dear sonic traveller. Beginning from the product's purchase date a 1-year warranty is guaranteed for each product in case of any manufacturing errors
or other functional deficiencies during runtime.
The warranty does not apply in case of: • damage caused by misuse • mechanical damage arising from careless treatment (dropping, vigorous shaking, mishandling, etc.)
• damage caused by liquids or powders penetrating the device • heat damage caused by overexposure to sunlight or heating • electric damage caused by improper connecting
The warranty covers replacement or repair, as decided by us. Please contact us via email for a return authorization before sending anything. Shipping costs of sending a module back for
servicing is paid by the customer. Device complies with all EU regulations concerning RoHS lead-free manufacturing and WEEE disposal
IT IS BETTER TOGETHER
6 HP width, 2 voice intuitive sample player with 8 banks
Zero-latency sample playback—directly from microSD card
Factory soundbank by Julia Bondar
Onboard envelope generator decay control, pitch control with 1V/Oct input
and sample selection control with meta cv input
Arbitrary sample rate: 8 and 16 bit samples with 12 bit output bitrate
Depth: 30mm (with ribbon cable plugged in)
Power requirements: +12V: 125mA, -12V: 20mA
Video manual: https://youtu.be/rdacPSxF4n4
red/brown pair or wires correspond
to negative -12V power connector
connect with the
16-pin side into the
power buss board
POWER CONNECTION
bottom/rear
side of the module
connect to the module
from the back side
-12V / red stripe
polarity marking
© Endorphin.es 2011–2022
Separate voices outputs,
voice 2 is pre-patched to voice 1 out
META control voltage inputs (range 0...+5V)
If no CV applied or sample selected,
then the first sample of each
voice’s folder is chosen.
Unattenuated META control voltage inputs
(range -5...+5V), voltage value added to the manual
offset sample selection knob (fuchsia mode).
Short press: MODE button for changing
the mode for voice 1 & 2 knobs:
envelope decay (blue),
pitch (red),
sample selection per voice (fuchsia).
Long press: BANK change from 1 to 8:
Pressing the button shortly three times
saves the knobs positions set for the current
bank of all modes and both voices.
Manual launch buttons for voices 1 & 2:
In case there is a clock signal applied to the
CLOCK IN* jack, the buttons trigger rolls
following the clock
Individual trigger/gate inputs
for each of the voices:
Typically you patch GATE or TRIGGER
pulses from the sequencer here.
Voice 1 & 2 knobs adjust parameters in
each mode:
- decay envelope (min. 10 ms/max. 10 sec.)
If knob is set CW the full sample is played
no decay at all.
- pitch +/-2 octaves
- sample select per voice: from 1st one
in alphabetical order to 24th.
1v/oct CV inputs for each of the voices 1 & 2:
Typically you patch pitch CV output from
the sequencer here.
1v/oct inputs range -3...+3V (6 octaves),
pitch voltage value added to the manual
pitch offset selection knob (red mode).
You can adjust the v/oct scale in the
settings/pitch_1/2.txt file.
TWO OF CUPS OVERVIEW
Short press: MODES visualization:
envelope decay (blue), pitch (red),
sample selection per voice (fuchsia).
Long press: visualization: BANK
bank 1, bank 2, bank 3, •• •• •••bank 4,
bank 5, bank 6, bank 7, •• •• •••• bank 8
voice 1/2 jack outputs compatible
with the airplane stereo adapter**
for further easier routing.
** if using stereo samples,
only left channel is played
separate left and rigth
3.5mm TS inputs/outputs
stereo TRS 3.5mm
input/output
LINK: https://endorphines.myshopify.com/collections/all-products/
products/airplane-audio-adapter-stereo-into-l-r-mono
If there is no clock present,
but a patch cable is inserted
into the CLOCK IN* jack,
manual launch buttons will not work.
Visit us:
https://endorphin.es
https://youtube.com/user/TheEndorphines
https://facebook.com/TheEndorphines
https://www.instagram.com/endorphin.es
https://twitter.com/endorphin_es
For technical requests: support@endorphin.es
For general requests: info@endorphin.es
FURTH BARCELONA, S.L. – VAT ID: ES B66836487
SD CARD FOLDER STRUCTURE/VOICES:
micro SD
card
bank1 bank2
voice1 voice2
bank8
final_final mix.wav
liquid_fart_08.wav
...
VEC1 FX Scr 04.wav
002.wav
02.wav
113.wav
crash.wav
bank 1 bank 2 bank 8
...
folder
structure
on micro
SD card:
Audio files need to be
8 or 16 bit PCM WAVE
files with arbitrary sample rate.
/settings/delay_1.txt and delay_2.txt
Value in the file sets the trigger
delay amount in milliseconds.
Default value is 0 msec.
Max. value is 1000 msec (1 second).
Average needed delay to sync the samples
in timewith your sequencer:
around 20 msec.
Up to 24* samples per voice,
automatically sorted by the file system;
default sample selected in sample
selection mode (fuchsia) and by
incoming META CV.
*Please update to the firmware from our
website to enable that feature.
Blinking LED (blue/red)
indicates the chosen bank 1 to 8
voice1
voice2
FACTORY SOUNDBANK:
Factory soundbank courtesy of Julia Bondar
and used with permission.
bank voice1 voice2
1 – SUPREME jb_drop_1.wav jb_drop_2.wav
jb_horn.wav
2 – PSYCHE jb_bass_growl.wav
jb_siren_1.wav
jb_atmo_5.wav
jb_brass_5.wav
jb_fx_crackles.wav
3 – HOURGLASS jb_bass_1.wav
jb_bass_2.wav
jb_atmo_3.wav
jb_atmo_4.wav
jb_brass_4.wav
jb_fx_im ct_1.wavpa
4 – PRELUDE jb_bass_sub.wav jb_piano_1.wav
jb_piano_2.wav
jb_piano_3.wav
5 – SCANDAL jb_atmo_2.wav
jb_atmo_6.wav
jb_bang_2.wav
jb_bang_3.wav
jb_fx_im ct_2.wavpa
jb_fx_im ct_3.wavpa
jb_fx_im ct_4.wavpa
6 – VOGUE jb_loop_1.wav
jb_loop_2.wav
jb_loop_3.wav
jb_atmo_1.wav
jb_vox.wav
7 – METEORITE jb_siren_2.wav
jb_snare.wav
8 – HESPERIDES jb_bang_1.wav jb_brass_1.wav
jb_brass_2.wav
jb_brass_3.wav
SD card format type: FAT
Module scans only .wav or .WAV files.
Recommended file name length: 20-30 symbols.
/settings/pitch_1.txt and pitch_2.txt
Sets the tuning stretch in case you wish
to calibrate each 1v/oct pitch cv inputs.
Default value is: -0.27
Values range: +/-0.5
© Endorphin.es 2011–2022
Power OFF you modular system:
Eject the microSD card from the module.
Insert it into computer:
The LED will light up in fuchsia color
and you will hear an ascending tone
from VOICE 1 OUT.
After approximately 10 seconds
the module will reboot with
the new firmware installed.
Unpack the downloaded archive and
place the toc-firmware.hex file into the
root folder of the microSD card.
Don't rename the file in any other
name. Put the card back into the
module and turn ON the power
of your modular system:
Download latest firmware for
TWO OF CUPS here:
https://www.endorphin.es
FIRMWARE UPDATE:
.hex
micro SD
card


Product specificaties

Merk: Endorphin.es
Categorie: Niet gecategoriseerd
Model: Two Of Cups

Heb je hulp nodig?

Als je hulp nodig hebt met Endorphin.es Two Of Cups stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Endorphin.es

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd