Emtec X150 Handleiding

Emtec Solid state drives (ssd) X150

Lees hieronder de 📖 handleiding in het Nederlandse voor Emtec X150 (3 pagina's) in de categorie Solid state drives (ssd). Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

X150 2.5’’ SATA

STOP! IMPORTANT INFORMATION.

READ THE FOLLOWING CAREFULLY BEFORE USING THE EMTEC SSD.

KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Safety & Handling Instructions:

Avoid touching the Emtec SSD’s connector. Handle the Emtec SSD using its edge or frame. Do not remove, damage or cover any

product labels. Removal of such labels voids the warranty.

Ensure the Emtec SSD does not exceed following operating temperature:

- Minimum : 0°C

- Maximum : 70°C

Exercise caution when removing the Emtec SSD from the Desktop/Notebook as the Emtec SSD may have heated up.

Keep the Emtec SSD away from sinks, drinks, bathtubs, showers, rain and other sources of moisture.

Moisture can cause electric shocks with any electronic device. Do not disassemble, crush, short circuit or incinerate the Emtec SSD

as it may cause ﬁre, injury, burns or other hazards.

Installation Guidelines:

Before installing the Emtec SSD please take all necessary precautions to comply with the Desktop/Notebook manufacturer’s

handling instructions.

1. Power oﬀ the Desktop/Notebook and disconnect the main power cord from the wall outlet. If the Desktop/Notebook uses a

removable battery, remove the battery.

2. Refer to the manufacturer’s instructions for details on how to remove the computer's outer case, and where the SATA connectors

are located on the motherboard.

3. According to the machine type:

a) Desktop: Connect the Emtec SATA SSD to the SATA data cable and insert the SATA cable into the SATA connector on the

motherboard.

Once you have installed the Emtec SATA SSD, put back the computer cover and plug back the power supply.

b) Notebook: Slide the Emtec SSD’s SATA connector into the Notebook’s SATA connector.

If necessary,reinstall the removable battery and plug back the power supply.

4. Power on the system to verify that the installation was successful.

Additional Safety Instructions:

Keep the Emtec SSD drive away from direct sunlight, moisture and extremes temperatures. Do not bend, ﬂex or drop your Emtec

SSD drive. The user is responsible for complying with all environmental, safety and other usage speciﬁcations outlined in the Product

Manual.

For any further enquiries, please visit EMTEC website : http://www.emtec-international.com

Disposal Instructions:

Do not dispose the Emtec SSD with unsorted waste. Improper disposal may be harmful to the environment and human health.

Please refer to your local waste authority for information on return and collection systems in your area.

Data backup:

To prevent data loss, we strongly recommend to proceed at least to a backup of your data. Any data loss or corruption while using

SSD is the sole responsibility of the user. Under any circumstances will the manufacturer be held liable for compensation or data

recovery.

Warranty:

This SSD has 3 years warranty from date of purchase. Within the warranty period, we will repair or replace your SSD in case of

material or functional defect. We do not take any responsibility in case of data loss. It is suggested that one regularly backs up their

personal data.

The warranty does not apply:

1) For damages caused by natural disaster.

2) If the SSD has been repaired or dismounted by unauthorized persons.

3) If the product has been destroyed voluntarily or unvoluntarily.

4) If the warranty label or capacity information have been changed or removed, if the serial number does not appear clearly or does

not match.

5) If the SSD was bought from unauthorized channel.

6) If the warranty period has expired.

Manufacturer declarations / Déclarations du fabricant / Declaraciones del fabricante / Dichiarazioni del fabbricante /

Herstellererklärungen / Declarações do fabricante / Aangiften van de fabrikant / Deklaracje producenta

USA

FCC / CEC

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment oﬀ and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit diﬀerent from that to which

the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

Canada

ICES- 003

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following

two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,

including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicable aux appareils radio exempts de

licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de

brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage

est susceptible d’en compromettre le fonctionnement.

Europe

Australia /

New Zealand

RCM

Our goods come with guarantees that cannot be excluded

under the Australian Consumer Law.

You are entitled to a replacement or refund for a major

failure and compensation for any other reasonably

foreseeable loss or damage.You are also entitled to have

the goods repaired or replaced if the goods fail to be of

acceptable quality and the failure does not amount to

a major failure

Environmental

ROHS

Reach

WEEE

Please dispose of this product by taking it to your local collection point or recycling center for such equipment.

Veillez à la mise au rebut appropriée de ce produit de en l’amenant à votre point de collecte local ou au centre

recyclage prévu pour traiter ce type de matériel.

Por favor, si desea deshacerse de este producto, llévelo a su punto local de recogida o un centro de reciclaje

para equipos electrónicos como este.

Smaltire il prodotto portandolo al punto di raccolta locale o Centro di riciclaggio per tali apparecchiature.

Entsorgen Sie das Produkt in einer lokalen Sammelstelle oder in einem für diese Art von Geräten zuständigen

Recycling-Zentrum.

Dirija-se ao ponto de recolha do seu local ou ao centro de reciclagem para deitar fora este produto.

Verwerk dit product als afval door het naar uw plaatselijk ophaalpunt of recyclagecentrum voor dergelijke

uitrustingte brengen.

Prosimy wyrzucic ten produkt w najblizszym lokalnym punkcie zbierania odpadów lub centrum odzysku tego typu

sprzetu.

EU :

DEXXON GROUPE

79 avenue Louis Roche

92230 Gennevilliers - France

USA/CANADA:

DEXXXON DIGITAL STORAGE / DEXXXON LOGISTICS

7611 Green Meadows Drive Lewis Center

OH 43035 USA –

EMTEC and EMTEC Logo are registered trademarks of DEXXON Groupe. All other trademarks are the property of their respective owners.

MODEL NUMBER : X1 50

Product specificaties

Merk:	Emtec
Categorie:	Solid state drives (ssd)
Model:	X150
Breedte:	69.85 mm
Diepte:	100 mm
Hoogte:	7 mm
Type verpakking:	Blister
Interface:	SATA III
Veiligheidsfunties:	Schokbestendig
SSD capaciteit:	2000 GB
ECC:	Ja
SSD-vormfactor:	2.5"
Mean time between failures (MTBF):	2000000 uur
Type geheugen:	3D NAND
Leessnelheid:	550 MB/s
Schrijfsnelheid:	530 MB/s
Component voor:	PC/notebook
Overdrachtssnelheid:	6 Gbit/s
Hardware encryptie:	Nee
S.M.A.R.T. support:	Ja
NVMe:	Nee
Random read (4KB):	99000 IOPS
Random write (4KB):	94000 IOPS
TRIM support:	Ja
TBW-classificatie:	215
Sequentiële leessnelheid (ATTO):	550 MB/s
Sequentiële schrijfsnelheid (ATTO):	530 MB/s
Sequentiële leessnelheid (CDM):	500 MB/s
Sequentiële schrijfsnelheid (CDM):	400 MB/s