EMOS H2017 Handleiding

EMOS Intercomsysteem H2017

Lees hieronder de 📖 handleiding in het Nederlandse voor EMOS H2017 (18 pagina's) in de categorie Intercomsysteem. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/18

3010002017_31-H2017_00_01 148 × 210 mm zdroj: 3010002017_31-H2017_00_01.indd

www.emos.eu

EM-07HD (H2017/H2018)

GB Colour Video Doorphone Set

CZ Sada barevného videotelefonu

SK Sada farebného videotelefónu

PL Zestaw wideodomofonowy

HU Színes képernyős videotelefon-készlet

SI Set barvnega videotelefona

RS|HR|BA|ME Komplet videotelefona u boji

DE Farbvideotelefon-Set

UA Комплект кольорового відеодомофону

RO|MD Set videotelefon color

LT Spalvinio vaizdo telefono komplektas

LV Krāsu videotālruņa komplekts

EE Värvivideofoni komplekt

BG Комплект цветен видеодомофон

140–170 cm

40 cm

Installation

Choosing a Place for Installing the Monitor

Take into account the need for cables when choosing a place to install the device. It is recommended that the device be

placed at eye level of the user.

Installation of Assembly Frame under Videomonitor

Place the frame on the mounting spot, mark out the locations for mounting holes and drill them into the wall. Sucient space

must remain in the centre of the mount for cables to the monitor (cable from the camera, cable from the power supply).

Attach the frame using screws; you can also add wall plugs.

Connecting the Cables

Connect the door camera unit to the monitor by plugging the cable into the prescribed terminals on both devices.

Hanging the Monitor

Gently press the monitor to the frame so that the protrusions lock into the opening at the rear of the monitor. Pushing the

monitor slightly downwards will x it in place.

Connecting the Device to the Power Grid

Connect the power supply to a network which meets the 230 V/50 Hz parameters of the device.

Plug the power supply connector (output) into the prescribed socket at the rear of the videomonitor.

Video-doorkeeper Connection Diagram

Terminal description:

1. Audio – white

2. GND – black

3. Video – yellow

4. 12 V power supply – red

Installation of the Door Camera Unit

Choose a suitable place for mounting and attach the hood.

Pull the power supply cable through the mounting opening and connect it to the terminal at the rear of the door camera unit.

Attach the connected door camera unit to the covering hood using the enclosed screws.

Door Camera Unit on Plaster

Apply a layer of silicone between the wall and covering hood tol prevent humidity from entering under the door camera unit.

The silicone should be applied on the top and the sides. The bottom side must be left open to allow humid air from exiting

the space under the door camera unit.

Parameters of Interlinking Cables

For distances under 20 m, use a quality UTP CAT.5 cable (optimally CAT.6). For distances over 20 m, we recommend a SYKFY

5 × 2 × 0.5 or 10 × 2 × 0.5 cable. To achieve higher diameter, cables can be doubled or tripled.

The resulting diameter of the conductors is as shown in the table:

Conductor core diameter [mm] Distance [m]

0.5 20

0.65 50

0.8 70

1 115

In basic implementation, there is no need to use a coaxial cable to transmit the video component.

Such a cable is only recommended for distances over 100 m.

For long ground cabling, you can use a telecommunication cable of category TCEPKPFLE.

Product specificaties

Merk:	EMOS
Categorie:	Intercomsysteem
Model:	H2017
Kleur van het product:	Wit
Breedte:	233 mm
Diepte:	23 mm
Hoogte:	160 mm
Kleur:	Ja
Internationale veiligheidscode (IP):	IP44
Montage gereedschap:	Ja
Beeldschermdiagonaal:	7 "
Connectiviteitstechnologie:	Bedraad
AC-adapter, uitgangsspanning:	12 V
Buitenunit inbegrepen:	Ja
Maximum aantal cameras ondersteund:	1