EMOS E5201 Handleiding

EMOS Weerstations E5201

Lees hieronder de πŸ“– handleiding in het Nederlandse voor EMOS E5201 (52 pagina's) in de categorie Weerstations. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/52
1
www.emos.cz
E5201
GB
WIRELESS WEATHER STATION
CZ
BEZDRÁTOVÁ METEOSTANICE
SK
BEZDRΓ”TOVÁ METEOSTANICA
PL
BEZPRZEWODOWA STACJA METEOROLOGICZNA
HU
VEZETΓ‰K NΓ‰LKÜLI IDŐJÁRÁSÁLLOMÁS
SI
BREZŽIČNA METEOROLOŠKA POSTAJA
RS HR| |BA
BEŽIČNA METEOROLOŠKA STANICA
DE
DRAHTLOSE WETTERSTATION
UA
ξ˜›ξ˜šξ˜™ξ˜˜ξ˜—ξ˜–ξ˜•ξ˜–ξ˜”ξ˜“ξ˜’ ξ˜‘ξ˜šξ˜•ξ˜šξ˜–ξ˜—ξ˜–ξ˜ξ˜–ξ˜ξ˜Žξ˜ξ˜Œξ˜“ξ˜’ ξ˜‹ξ˜—ξ˜“ξ˜Šξ˜•ξ˜—ξ˜Žξ˜’
RO
STAξ˜‰IE METEO FΔ‚RΔ‚ FIR
LT
BELAIDΔ– ORO STOTELΔ–
LV
BEZVADU METEOROLOΔ’ISKΔ€ STACIJA
2606141000_31-E5201 105 Γ— 148 mm
2
WIRELESS WEATHER STATION
The weather station displays a clock, an alarm clock with the snooze function, weather forecast and accurate data
on indoor and outdoor temperature.
Read carefully this manual before using this product.
SPECIFICATIONS:
radio controlled clock
temperature: indoor temperature 0 Β°C to +50 Β°C; outdoor temperature -50 Β°C to +70 Β°C
temperature accuracy: 0.1 Β°C
wireless sensor: transmission frequency 433 MHz
radio signal range: up to 30 m in free space
maximum number of sensors: 1
length of the sensor’s wire probe: 0.9 m
power: main station: 4.5 V/500 mA AC adapter (included), 3Γ— 1.5 V AAA
sensor: 2Γ— 1.5 V AAA
dimensions and weight: main station: 96 Γ— 178 Γ— 51 mm, 262 g (without batteries)
sensor dimensions: 110 Γ— 38 Γ— 26 mm, 47 g (without batteries)
Overview of icons and buttons
Main station – display
A
1
9
8
7
6
2 3 4
B C D
5
E
1. weather trend
2. weather forecast icon
3. DCF 77 signal reception icon
4. outdoor temperature
5. indoor temperature
6. activated alarm clock icon
7. sensor battery at icon
8. DST icon
9. current time display
A - MODE – basic setting of weather station/alarm clock
B - – 1 step forwardβ–²
C - – 1 step backward/activate alarm clockβ–Ό
D - SEARCH – search for outdoor sensor signal
E – activate the snooze feature
GB
3
Connector to connect power supply to the main station
Wireless sensor
A
4
312
1 – DCF signal reception icon
2 – channel number
3 – low battery icon
4 – outdoor temperature
A – activate reception of DCF signal (WAVE)
Adapter connection and battery installation
1. When you rst use the weather station, insert rst backup batteries 3Γ— 1.5 V AAA into it and connect the power
supply to the connector on the back side.
2. Use only the supplied power source, otherwise it may damage the weather station. Press and hold the SEARCH
button, outside temperature value starts ashing.
3. Then insert the batteries 2Γ— 1.5 V AAA into the wireless sensor’s battery compartment on the back side.
Outdoor temperature is displayed on the weather station within 2 minutes.
When inserting batteries, make sure they have the correct polarity, otherwise they may damage the weather station
or sensor! Only use alkaline batteries of the same type, do not use rechargeable batteries. Low batteries in the sensor
are indicated by a red LED at the battery icon on the weather station display. Dispose of the used batteries in an
environmentally friendly way in accordance with the national legislation. Permanent backlight is only functional
when the weather station is connected to the power supply. The display is not lit when it is disconnected from the
power supply, but the backup batteries will preserve all the measured values.
We recommend placing the sensor on the north side of the house. The sensor is resistant to dripping water, however,
it should not be exposed to rain permanently. The range of the sensor may decrease substantially in urban areas. Also,
placing the sensor on metal objects will reduce its transmission range.
If you want to have the sensor placed in a room and measure the outdoor temperature, thread the wire probe
through a window which is not often used.
With frequent opening, the wire probe may be damaged or destroyed. The outdoor portion of the temperature wire
probe must be attached so as to prevent its tearing o in the wind.

Product specificaties

Merk: EMOS
Categorie: Weerstations
Model: E5201

Heb je hulp nodig?

Als je hulp nodig hebt met EMOS E5201 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Weerstations EMOS

EMOS

EMOS E5201 Handleiding

4 Oktober 2022

Handleiding Weerstations

Nieuwste handleidingen voor Weerstations

Alecto

Alecto WS-1050 Handleiding

4 Oktober 2022
Hama

Hama EWS-800 Handleiding

4 Oktober 2022
Auriol

Auriol Z31743 Handleiding

4 Oktober 2022
Alecto

Alecto WS-1100 Handleiding

4 Oktober 2022
Meade

Meade TE388W Handleiding

4 Oktober 2022
AcuRite

AcuRite 00829 Handleiding

4 Oktober 2022
Conrad

Conrad WF 50 Handleiding

4 Oktober 2022
GoGEN

GoGEN ME 3236 Handleiding

4 Oktober 2022
Trevi

Trevi ME 3104 Handleiding

4 Oktober 2022
Techno Line

Techno Line WS 6600 Handleiding

4 Oktober 2022