ELO ECMG3 Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor ELO ECMG3 (37 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 187 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/37
USER MANUAL
Elo Touch Solutions
Interactive Digital Signage (IDS) ECMG3 For
IDS 3202L / 4202L / 4602L / 5502L
User Manual
ā€“
IDS Computer Module
UM600
2
2
9
2
of
37
Copyright Ā© 2018 Elo Touch Solutions, Inc. All Rights Reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form
or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo Touch Solutions, Inc.
Disclaimer
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Aļ¬€iliates (collectively ā€œEloā€) makes no representations or
warranties with respect to the contents herein, and speciļ¬cally disclaims any implied warranties of merchantability or ļ¬tness for a particular purpose. Elo reserves the
right to
revise this publication and to make changes from time to time in the content hereof without obligation of Elo to notify any person of such revisions or changes.
Trademark Acknowledgments
Elo, Elo (logo), Elo Touch, and Elo Touch Solutions are trademarks of Elo and its Aļ¬ƒliates. Windows is a trademark of Microsoft Corporation.
User Manual
ā€“
IDS Computer Module
UM600
2
2
9
3
of
37
Table of Contents
Section 1: Introduction ...................................................................................................................................................................................................................... 4
Section 2: Unpacking ....................................................................................................................................................................................................................... 5
Section 3: Computer Module Installation ........................................................................................................................................................................................... 6
Section 4: Technical Support .......................................................................................................................................................................................................... 25
Section 5: Safety & Maintenance .................................................................................................................................................................................................... 27
Section 7: Regulatory Information ................................................................................................................................................................................................... 28
Section 8: Warranty Information ..................................................................................................................................................................................................... 21
User Manual
ā€“
IDS Computer Module
UM600
2
2
9
4
of
37
Section 1: Introduction
Product Description
Interactive Digital Signage Elo Computer Module Generation 3 (ECMG3) is designed to slide into the bay on the back of the IDS 02-Series touch displays,
without any eļ¬€ect on the monitorā€™s form factor or requiring any extra cabling. By combining the two, you can transform your Interactive Digital Signage
Touch Display into an all-In-one touchcomputer.
Precautions
Follow all warnings, precautions and maintenance as recommended in this userā€™s manual to maximize the life of your unit and prevent risks to user safety.
This manual contains information that is important for the proper setup and maintenance of the Computer Module. Before setting up and powering on your
new Computer Module, read through this manual, especially the Computer Module Installation chapter.
User Manual
ā€“
IDS Computer Module
UM600
2
2
9
5
of
37
Section 2: Unpacking
Unpacking the ECMG3
Check that the following items are present and in good condition:
ā€¢
Computer Module
ā€¢
Quick Install Guide
ā€¢
PC Box Cable Cover
User Manual
ā€“
IDS Computer Module
UM600
2
2
9
6
of
37
Section 3: Computer Module Installation
Installation
1. Use a Phillips head screwdriver to remove the ECM docking cover plate on the back of the touchmonitor.
2. Snap the Computer Module onto the mating connector on the back of the touchmonitor.
User Manual
ā€“
IDS Computer Module
UM600
2
2
9
7
of
37
3. Tighten the four screws to secure the Computer Module onto the back of the touchmonitor. Mount the IDS to any VESA compliant wallmount using
the extension spacers and screws (included).
Note: Once the ECM is installed, the ECM can be easily removed for maintenance reasons by loosening the thumbscrews and sliding it out.
User Manual
ā€“
IDS Computer Module
UM600
2
2
9
8
of
37
Connector Panel & Interfaces
Touchmonitor & Computer Module Connections
1. Once the Computer Module has been installed, connect the AC power cable between the touchmonitorā€™s POWER IN connector and the AC power
source.
a. NOTE: Computer Module can be installed when the AC power cable is connected (Hot pluggable). Do not remove the Computer Module
unless it is completely shut oļ¬€.
2. Make any desired connections to the Computer Module connector panel.
3. Press the touchmonitorā€™s power button to turn on the Computer Module.
Operating System Setup ā€“ WindowsĀ® 7
The initial setup of the operating system takes approximately ļ¬ve minutes. Additional time might be needed for different hardware and operating system
conļ¬gurations. You will need to plug in an external mouse and/or keyboard into the Computer Module connector panel to execute these steps.
To set up the Windows 7 OS for the Computer Module, turn on the touchcomputer and follow the instructions on the screen.
User Manual
ā€“
IDS Computer Module
UM600
2
2
9
9
of
37
Selecting the Region and Language
English is the default language in Windows menus and dialog boxes. You can change this language according to your preference.
Choosing the computer name
You will be prompted to enter the computerā€™s name.
User Manual
ā€“
IDS Computer Module
UM600
2
2
9
Rev. A, page
12
of
37
Injecting a New Language in Windows 7
Windows can only run one language at any given time. The Elo Touch Solutions language injection feature can be used to modify your language
preference. English is set as the default language, but you can change this language according to your preferences. To use the language injection feature:
1. Power off your system completely.
2. Power on your system.
3. After the Elo splash screen (shown below), press or ā€œā†“ā€ repeatedly to pause on Windows Boot Manager.ā€œā†‘ā€
4. Select either ā€œRestore OS 32bitā€ or ā€œRestore OS 64bitā€ depending on your OS environment.
User Manual
ā€“
IDS Computer Module
UM600
2
2
9
Rev. A, page
13
of
37
5. The following User Interface (UI) will appear:
6. Select ā€œInject Languageā€ and the following UI will appear.
User Manual
ā€“
IDS Computer Module
UM600
2
2
9
Rev. A, page
14
of
37
7. Click the drop-down list and select the preferred language.
8. Click ā€œInject Selected Languageā€
9. While the injecting process, DO NOT use your keyboard or mouse as this may cause an error in the language injection process.
10. After successful installation of the language package, press any key to exit the window.
11. You should see the newly injected language in both ā€œSelected Languageā€ and ā€œInjected Languageā€.
12. Click ā€œCanceā€l ā€œExitā€. The system will reboot and the new language UI should be presented when the system enters the Desktop. ī€
User Manual
ā€“
IDS Computer Module
UM600
2
2
9
Rev. A, page
15
of
37
Operating System Setup ā€“ Windows 10
Initial setup of the operating system takes approximately five minutes. Additional time may be needed for different Computer Module hardware and
operating system configurations. You will need to plug in an external keyboard and/or mouse into the Computer Module connector panel to execute these
steps.
To set up the Windows 10 OS for the Computer Module, turn on the touchcomputer and follow the instructions on the screen.
Selecting the Language
Windows will prompt you to select your language of preference. See reference image below.
Agreeing to Terms and Conditions
You will be prompted to agree to the Windows license terms. Click ā€œI Acceptā€ to continue.
User Manual
ā€“
IDS Computer Module
UM600
2
2
9
Rev. A, page
16
of
37
Choosing the Windows Settings
You will be prompted to select the Windows settings
Creating Your Account
You will be prompted to create a Username and Password. Once set up, click ā€œFinish to complete Setup. See reference image below. ā€
User Manual
ā€“
IDS Computer Module
UM600
2
2
9
Rev. A, page
19
of
37
4. After the ļ¬‚ash drive is plugged in, you will see the below window. Click ā€œFormat Driveā€ to continue the process. PLEASE NOTE THAT THIS WILL
ERASE ALL DATA CONTAINED IN THE FLASH.
5. Click ā€œCreate Restore Mediaā€ to proceed. This step will take about 10-20 minutes, depending on your system conļ¬gurations and ļ¬‚ash drive
performance.
User Manual
ā€“
IDS Computer Module
UM600
2
2
9
Rev. A, page
21
of
37
11. Note: The end user must adhere to Microsoft's Licensing Agreement
Recovering the Operating System
If for any reason the touchcomputerā€™s operating system needs to be recovered TO FACTORY SETTINGS, you can recover your system by following
procedures below. PLEASE NOTE THAT ALL CUSTOMER SETTINGS AND DATA WILL BE LOST DURING THIS PROCESS. Please be sure to backup all
data, settings, and customer-installed software before proceeding.
1. Power oļ¬€ your system.
2. Power on your system.
3. ā€œAfter the Elo splash screen (shown below) appears, press ā†‘ā€ or ā€œā†“ā€ repeatedly to pause on Windows Boot Manager.
User Manual
ā€“
IDS Computer Module
UM600
2
2
9
Rev. A, page
22
of
37
4. Select either to ā€œRestore OS 32bitā€ or ā€œRestore OS 64bitā€ depending on your OS environment.
5. The following User Interface (UI) will appear:
User Manual
ā€“
IDS Computer Module
UM600
2
2
9
Rev. A, page
26
of
37
Technical Assistance
See this user manualā€™s last page for worldwide technical support phone numbers.
Technical assistance for Computer Modules running Windows OS are also available on the computer in the Support Information section of the Systems
Properties menu. The Systems Properties menu can be accessed by:
ā€¢
Right-clicking the My Computer icon and selecting Properties from the drop-down menu, or
ā€¢
Clicking the Start button; go to the Settings -> Control Panel menu and selecting the System icon
Technical Specifications
visit www.elotouch.com/products
for technical speciļ¬cations for this device
Support
visit www.elotouch.com/support
for technical support


Product specificaties

Merk: ELO
Categorie: Niet gecategoriseerd
Model: ECMG3
Gewicht: 3120 g
Breedte: 300 mm
Diepte: 428 mm
Hoogte: 37 mm
Gewicht verpakking: 4750 g
Breedte verpakking: 419 mm
Diepte verpakking: 535 mm
Hoogte verpakking: 130 mm
Gebruikershandleiding: Ja
Processorfamilie: IntelĀ® Coreā„¢ i7
Processormodel: i7-6700
Inclusief besturingssysteem: Windows 10
GeĆÆntegreerde geheugenkaartlezer: Nee
Aantal HDMI-poorten: 1
Microfoon, line-in ingang: Ja
Aantal Ethernet LAN (RJ-45)-poorten: 1
Certificering: UL/cUL, CB, FCC, CE, AS, NZS, VCCI
Intern geheugen: 8 GB
Opslagmedia: SSD
Intern geheugentype: DDR4-SDRAM
Temperatuur bij opslag: -20 - 60 Ā°C
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A: 4
Bus type: DMI3
Maximum intern geheugen: 32 GB
Totale opslagcapaciteit: 256 GB
Ingebouwde grafische adapter: Ja
Aparte grafische adapter: Nee
On-board graphics adapter model: IntelĀ® HD Graphics 530
Enhanced Intel SpeedStep Technology: Ja
Execute Disable Bit: Ja
Idle States: Ja
IntelĀ® Enhanced Halt State: Ja
IntelĀ® VT-x with Extended Page Tables (EPT): Ja
Ingebouwde opties beschikbaar: Ja
Graphics & IMC lithografie: 14 nm
IntelĀ® 64: Ja
IntelĀ® Virtualization Technology for Directed I/O (VT-d): Ja
IntelĀ® Clear Video-technologie: Ja
IntelĀ® Software Guard Extensions (IntelĀ® SGX): Ja
IntelĀ® Virtualization Technology (VT-x): Ja
Conflictvrije processor: Ja
Versie IntelĀ® Identity Protection Technology: 1.00
Versie IntelĀ® Secure Key Technology: 1.00
IntelĀ® Trusted Execution Technology: Ja
IntelĀ® TSX-NI: Ja
IntelĀ® Stable Image Platform Program (SIPP): Ja
Versie IntelĀ® TSX-NI: 1.00
Luchtvochtigheid bij opslag: 5 - 90 procent
Maximale turbofrequentie van processor: 4 GHz
SSD capaciteit: 256 GB
Kloksnelheid geheugen: 2400 MHz
Geheugenlayout: 1 x 8 GB
Geheugenslots: 2x SO-DIMM
SSD interfaces: SATA
Aantal storage drives geĆÆnstalleerd: 1
Lijnuitgang: Ja
Chipset moederbord: IntelĀ® Q170
IntelĀ® Small Business Advantage (SBA)-versie: 1.00
Wifi: Nee
Bedrijfstemperatuur (T-T): 0 - 40 Ā°C
Relatieve vochtigheid in bedrijf (V-V): 20 - 80 procent
Code geharmoniseerd systeem (HS): 84713000
Processorgeneratie: Zesde generatie IntelĀ® Coreā„¢ i7

Heb je hulp nodig?

Als je hulp nodig hebt met ELO ECMG3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd ELO

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd