Elite Screens ZSP-TR02 Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Elite Screens ZSP-TR02 (5 pagina's) in de categorie Projector accessoire. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
1
Rev.042511‐ AS
www.elitescreens.com info@elitescreens.com
 


Wireless RF Projector Trigger Controller
For Floor Rising Electric Screens
Model #
ZSP-TR02
User’sGuide

 

2
Rev.042511‐ AS
www.elitescreens.com info@elitescreens.com


1. Size & Weight :
W x H x D = x x     4.8” 2” 0.7”
Weight = 0.09lbs.

2. MaximumControl   Distance : 80 Feet (25M)
ControlType:ASK/FSK

3. 15V Projector Output SupportTriggerVoltage :3‐

4. RF   Spec. Frequency : 315Mhz, :Power Below  ‐ 2 milli watts

5. Directions   for use :
a. Referto thethe version the numberon screen’sendcapsticker,oron outsidestickerofthe
packaging yourboxtomakesure screen  is compatible withtheZSP‐TR02.
b. UsethewirelessRadioFrequencyTriggerControllerto thesynchronize screen’srise/drop
withtheprojector’spower viacycle,   ‐a 5 12volttrigger. 
c. Connectthe towirelessRFTriggerController theprojectorasshown in Fig.3



 


 







Specifications


Location versionof numberon
endca
p
sticker.
Fig. 1

Location   of version number on
packaging  box sticker.
Fig. 2
3
Rev.042511‐ AS
www.elitescreens.com info@elitescreens.com








 

 




Note: TriggerDirectionsforsynchronizingyour ‐5 12V Wireless  toyourFloorRising Electric Screen.

Version 2.0 (5‐           12V wireless trigger and Elite electric screen must be the same version)
Step1:Makesuretounplugyourscreen    from the power outlet.

Step2:HoldtheUPbutton   ‐   on your 5 12V wireless trigger.

Step3:WhileholdingtheUP         button, plug the screen back in to the power outlet.

Step4: 5Wait seconds,andthenreleasetheUP button.

Step5: Your 5 if  ‐12Vwirelesstriggershouldnowbeactivated.(Repeatthesteps unsuccessful)


OnceyourRFremotehasbeenactivated,the thesynchronizationwillbesavedevenif poweriscutoff.


Fig.3


Product specificaties

Merk: Elite Screens
Categorie: Projector accessoire
Model: ZSP-TR02
Kleur van het product: Zwart
Gewicht: 40.8 g
Breedte: 121.9 mm
Diepte: 50.8 mm
Hoogte: 17.78 mm
Connectiviteitstechnologie: Draadloos
Aantal per verpakking: 1 stuk(s)
Merkcompatibiliteit: Elite Screens

Heb je hulp nodig?

Als je hulp nodig hebt met Elite Screens ZSP-TR02 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Projector accessoire Elite Screens

Handleiding Projector accessoire

Nieuwste handleidingen voor Projector accessoire