Elektrobock BT52 Handleiding

Elektrobock Thermostaat BT52

Lees hieronder de 📖 handleiding in het Nederlandse voor Elektrobock BT52 (20 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

BT52

T52

BT52

WIRELESS ROOM THERMOSTAT

for boilers with OpenTherm communication

The BT52 wireless thermostat is designed to control gas and electric boilers that use the OpenTherm plus (OT +) commu-

nication protocol. It consists of a receiving part (receiver) and a transmitting part (transmitter), which use two-way wireless

communications on the frequency of 433.92 MHz. This wireless variant allows for easy and quick installation, thus eliminating

the laborious and time-consuming installation of the line between the thermostat and the boiler with a passage through the

oor. The receiver is connected to the boiler via the OT communication line. This line transmits data and also powers the rece-

iver. The receiver immediately transmits the data obtained from the boiler to the transmitter, where the data is processed. The

required heating water is calculated and this request is sent back to the boiler.

receiver

transmitter

• Possibility to place a thermostat (transmitter) as needed.

• Predictive system (smart timer) guarantees determined

temperature at the required time. The adaptive controller evaluates

temperature gradient of the room and can determine the necessary

time to reach the required temperature.

• 9 weekly programs (optional) for UT (6 temperature changes

for a day).

• 1 week program (optional) for DHW (3 time periods

with dierent temperatures).

• Choice of regulation type:

equithermal regulation

equithermal control with internal temperature correction

PI regulation

• Display of operating hours information for UT / TUV.

• Display of outdoor temperature information.

• Display of heating water temperature and modulation power in-

formation.

• Display of additional information sent by the boiler to the receiver

(water ow in liters, return temperature, etc. depending on the type

boilers).

• E-EPROM memory retains all settings indenitely

even in the event of a power failure.

• Possibility of control via GSM module GST1 or GST2 (optional).

• Automatic changeover to WINTER or SUMMER time.

• Automatic indication of boiler maintenance.

• Measured temperature -9 ° C to 39 ° C.

• Antifreeze mode.

• Holiday mode and summer mode.

• Power supply 2x1.5 V alk. battery

• Power supply via OT communication

line directly from the boiler (or external

adapter AD05 - not included)

• Receiver with SELF-LEARNING system

CODES and with E-EPROM memory (sto-

re code even in case of power failure).

• Visual inspection of conditions

using colored indicator LEDs.

•The receiver keeps the last settings

and in the event of a wireless failure

signal, ensures the operation of the boiler.

ca 25 m

BOILER

with OpenTherm

communications

over one

oor

CONTENT

Description BT52 ............................................................... .1p

Content ............................................................... .2p

Properties BT52 ............................................................... .3p

Function .......................................................... p.3

Commissioning diagram .......................................................... p.3

Receiver BT52 ............................................................... .4p

Assembly .......................................................... p.4

Wireless mode .......................................................... p.5

Receiver coding .......................................................... p.5

Transmitter BT52 ............................................................... .6p

Description of controls .......................................................... p.6

Battery placement .......................................................... p.6

Transmitter disassembly .......................................................... p.6

Display description .......................................................... p.7

Operating modes (AUTO, MANU ..) .......................................................... p.8

Setting of temperature programs for UT and TUV .......................................................... p.9

Table of free and preset programs .......................................................... p.9

Setting constants CONST1 to CONST7 .......................................................... p.10

CONST1 Language selection ..................................................................... .10p

CONST2 Minimum regulated temperature ..................................................................... .10p

CONST3 Maximum regulated temperature ..................................................................... .10p

CONST4 Minimum water temperature in the heating system ..................................................................... .10p

CONST5 Maximum water temperature in the heating system ..................................................................... .10p

CONST6 Choice of regulation type ..................................................................... .10p

CONST7 PI control interval ..................................................................... .10p

Setting the CONST8 constant .......................................................... p.11

CONST8 Proportional band of PI regulation ..................................................................... .11p

Setting constants CONST9 to CONST12 .......................................................... p.12

CONST9 Manual or automatic heating curve correction .................................................................... .12. p

CONST10 Building insulation ...................................................................... .12p

CONST11 Equithermal control interval ...................................................................... .12p

CONST12 Equithermal control reaction rate ...................................................................... .12p

Setting constants CONST13 to CONST20 .......................................................... p.13

CONST13 Premature heating on ...................................................................... .13p

CONST14 Summer mode ...................................................................... .13p

CONST15 Odd - even week choice ...................................................................... .13p

CONST16 Temperature correction ...................................................................... p.13

CONST18 Choice of control via GSM module ...................................................................... .13p

CONST19 Phone number setting ...................................................................... .13p

CONST20 Setting the PIN code of the used SIM card ...................................................................... .13p

Setting constants CONST21 to CONST27 .......................................................... p.14

CONST21 Function test ...................................................................... .14p

CONST22 Key lock ...................................................................... .14p

CONST23 Key code ...................................................................... .14p

CONST24 Boiler maintenance indication ...................................................................... .14p

CONST26 Boiler type selection ...................................................................... .14p

CONST27 Password (against setting change) ...................................................................... .14 p

Other displayed information .......................................................... p.15

Error messages .......................................................... p.16

Antifreeze mode .......................................................... p.16

GSM module connection .......................................................... p.16

Control when using the GSM module .................................................................. p.17

Technical parameters ......................................................... p.18

For easier orientation in the manual, each page is marked with the symbol of the part of the thermostat to

which it applies specied settings:

RECEIVER TRANSMITTER

BT52 FEATURES

Before using the thermostat, it is necessary to verify which functions from the OpenTherm protocol your

heating device uses (some heating devices do not use all the functions of the OpenTherm protocol)!

OpenTherm Plus / Lite (OT + / OT-) protocol: based on this protocol, two-way communication (OT +) takes place

between the thermostat receiver and the boiler. The thermostat receiver obtains the necessary information (eg

about the outdoor temperature), which it then processes and transmits to the transmitter. From the information

obtained about the outdoor temperature, the room temperature and the set constants, the thermostat recalculates

the desired water temperature of the heating system and passes it back to the boiler. This wireless communication

system enables optimal operation of the boiler and heating system, including DHW, thus achieving longer boiler

life and higher savings.

In order to avoid interference and inuence from other BT52s in the vicinity, each thermostat is protected

by its own unique code, which is stored at the factory! As the whole system works on the two-way radio fre-

quency 433.92 MHz, follow the instructions for mounting and positioning the thermostat according to the

instructions!

!BT52 FUNCTIONS

Equithermal regulation

Equithermal control with manual curve correction

Equithermal control with automatic correction according to the eect of room temperature

Correction of the inuence of building dynamics (for equithermal regulation)

PI control (regardless of outdoor temperature)

Premature heating on (adaptive controller evaluates the room temperature gradient

and can determine the time necessary to reach the desired temperature at a given time)

Setting the minimum and maximum water temperature in the heating system

DHW preparation program (3 time intervals per day)

Holiday mode (constant temperature during the holiday)

Summer mode

COMMISSION SCHEME BT52

STUDY MANUAL

BT52

p.1-18

RECEIVER ASSEMBLY

BT52

p.4

TRANSMITTER

RECOVERY

p.6

BT52 TRANSMITTER FUNCTION

SETTINGS p.7-17

WIRELESS MODE SETTINGS

p.5

TRANSMITTER CONTROL

BT52

p.8-17

SERVICE

TECHNICIAN

USER

Follow the instructions to install the receiver and

connect via the communication line to the boiler

(or connect an external adapter).

Operate the transmitter by removing the pro-

tective paper from the batteries (display is active).

Set the clock, programs (PROG), constants

(CONST) and operating mode (AUTO / MANU).

The receiver is coded at the factory.

When the red Error LED on the receiver ashes ,

perform a TEST on the transmitter (see page 8).

If the wireless mode is not switched on, it is nece-

ssary to perform the coding, see p.5!

Product specificaties

Merk:	Elektrobock
Categorie:	Thermostaat
Model:	BT52

Heb je hulp nodig?

Als je hulp nodig hebt met Elektrobock BT52 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Thermostaat Elektrobock

Elektrobock BT730 Handleiding

12 Maart 2024

Elektrobock PT 32 GST Handleiding

11 September 2023

Elektrobock BPT 32 Handleiding

11 September 2023

Elektrobock PT 14 Handleiding

11 September 2023

Elektrobock PT 713 EI Handleiding

11 September 2023

Elektrobock PT 713 Handleiding

11 September 2023

Elektrobock BPT 22 Handleiding

11 September 2023

Elektrobock BT710 Handleiding

24 Juni 2023

Elektrobock BT102 Handleiding

6 Juni 2023

Elektrobock PT01 Handleiding

13 Mei 2023

Handleiding Thermostaat

Nieuwste handleidingen voor Thermostaat

Techno Line TM 3010 Handleiding

18 November 2024

Ferguson FS1TH Handleiding

17 November 2024

EQ-3 HM-RC-19 Handleiding

16 November 2024

EQ-3 CC-RT-N Handleiding

16 November 2024

Delta Dore TYDOM 1.0 Handleiding

16 November 2024

Delta Dore Tybox 5701 FP Handleiding

16 November 2024

Delta Dore Tybox 33 Handleiding

16 November 2024

Delta Dore Tybox 5702 FP Handleiding

16 November 2024

Delta Dore Tybox 31 Handleiding

16 November 2024

Delta Dore TYBOX 827 W RF Handleiding

16 November 2024