Elba EGS-D7422SG(BK) Handleiding

Elba Fornuis EGS-D7422SG(BK)

Lees hieronder de 📖 handleiding in het Nederlandse voor Elba EGS-D7422SG(BK) (4 pagina's) in de categorie Fornuis. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

TABLE GLASS STOVE

MODEL: EGS-D7402RG(BK)

EGS-D7422SG(BK)

Owner’s Manual

For The Warranty Terms & Conditions, Please Refer To Warranty Certificate

Please read this manual carefully before

operating your set.

Retain it for future reference.

Record model number and serial number of

the set.

See the label attached on the set and quote

this information to your dealer when you

require service.

Please read this instruction carefully. It is advisable to keep this

instruction manual in a safe place for future reference.

Please consult qualified service technician or contact the service

centre if you may not solve the problem. Make sure to turn off the

main valve at the gas cylinder.

1. Keep electrical appliances out of reach from children. Do not let

them to operate the appliances without supervision.

2. This product is for household and indoor use only.

3. This product is not intended for use by person (including

children) with reduced physical, sensory or mental capabilities

unless they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

4. If the ignition knob or any part of the burner has damaged, it

must be replaced by the service centre or a qualified service

technician to avoid hazard.

5. Before installation, check if the gas supply pressure is matched

with the rated pressure stated on the rating plate of the appliance.

Use only the specified type of gas stated on the rating plate.

6. There must be adequate air ventilation of the room when the

product is used.

7. There is a risk of fire if cleaning is not carried out in accordance

with this instruction.

8. Do not touch the stove exterior during or after cooking with bare

hand.

9. Before maintenance, disconnect the appliance from the gas

supply and wait for it to cool down.

10. Do not store or place flammable liquids or items in the vicinity of

this appliance. Do not place the appliance near any flammable

materials.

11. Always shut off the gas supply when the appliance is not in use.

12. Do not use harsh abrasive cleaners or sharp metal scrapers to

clean the appliance as it will scratch the surface, which may result

in shattering of the glass.

SAFETY PRECAUTIONS

TROUBLESHOOTING

CAUSE SOLUTIONISSUE

After the ignition knob is

released, the flame

extinguished.

The burner does not light up.

Uneven flame.

The flame extinguished while

the unit is in use.

Abnormal sound during

combustion.

Smell of gas.

The ignition knob is not turned on

properly. Turn it counter clockwise.

Open the main valve.

Repeat turning it on for

several times.

Clean or dry up. Install the

appliance properly without

bending the rubber hose.

Replace gas cylinder.

Clean the cap.

Replace the rubber hose.

Secure the rubber hose with

the hose clamp.

Mount the burner caps in

place.

Fixed and fit the burner rings

Air is entrapped in the rubber gas

hose.

The ignition spark device is dirty

or wet.

The rubber hose is bent.

Short of gas supply.

The slits in the burner caps are

clogged.

Gas leakage from cracks of

rubber hose.

Loose connection of rubber hose.

The burner caps not mounted

properly.

The burner ring is not in a fixed

position.

CARE OF YOUR APPLIANCE PRODUCT DESCRIPTION

INSTALLATION INSTRUCTION

CAUTIONS

PARTS MAINTENANCE

Before the maintenance, make sure the appliance is cool and the

main cock is turned off.

Perform the following maintenance periodically.

Do not use the appliance if it has damaged in any way.

Refer to the troubleshooting guide before calling service.

Do not carry out repairs on the appliance by yourself.

Check if the slits in the burner ring are clogged with

dirt. Clean them with a wire brush.

After washing the burner caps, dry them completely

before assembly.

Make sure the cap is mounted in place.

(If the ring caps are not mounted properly,

gas distribution may not be even.)

When they get dirty, use a soft cloth damped with mild detergent to wipe

off dirt. Do not use thinner or benzine for cleaning. This may damage the

appliance.

Make sure the rubber hose is tightly secured over gas supply outlet and

secure it with the hose clamp. If there are cracks in the hose, replace it.

When they get dirty, use a soft cloth to wipe off dirt.

Make sure to wipe off dirt every time when they get dirty, if they are kept

dirty for a long time (more than one week), they will become stained or it

will cause the stripping of the coating material.

If the dirt is difficult to wipe off, use a soft cloth damped with a neutral

detergent solution or water.

It is

and a white surface comes out. This will not cause any problems in your

daily use.

The coating material of the appliance is weak against a physical shock or

high temperatures. The following must be kept in mind.

a) Do not use polishing powder, cleanser, knife, alkaline detergent or

bleaching solution to wipe off the dirt.

b) Do not give a physical shock to the appliance.

c) Do not give excessive heat to the appliance by covering the burner

with a large iron plate or a large pot.

Ring Caps

Burners,

Ring Caps

Pan Support

Cook Top and

Control Panel

Rubber Hose

Cook Top

Burner Cap (right)

Gas Inlet

(At the rear of the unit)

Rating Plate (side)

Burner Cap (left)

Cook Top

Ignition Knob (right)

Ignition Knob (left)

Drip Pan

Pan Support (right)

Pan Support (left)

Remove the packaging material of the

appliance. Assemble the rubber foot to the

bottom of the appliance.

Mount the left and right burner caps and

make sure it sits properly.

Place the left and right pan support on the

appliance and fix it properly.

1) Make sure the appliance is installed in a room where no strong

airflow and away from windows.

2) Allow at least 15cm from the wall and 100cm from the ceiling.

3) Do not bend, twist or stretch the rubber hose. Fit the rubber hose

onto the gas inlet and secure it with a hose clamp.

expected that the section below the pan support will be scratched

Product specificaties

Merk:	Elba
Categorie:	Fornuis
Model:	EGS-D7422SG(BK)
Apparaatplaatsing:	Aanrecht
Soort bediening:	Draaiknop
Kleur van het product:	Black, Stainless steel
Ingebouwd display:	Nee
Gewicht:	6400 g
Breedte:	710 mm
Diepte:	400 mm
Hoogte:	120 mm
Gewicht verpakking:	7400 g
Breedte verpakking:	740 mm
Diepte verpakking:	443 mm
Hoogte verpakking:	137 mm
Aantal branders/kookzones:	2 zone(s)
Type kookplaat:	Gaskookplaat
Electronische ontsteking:	Ja
Aantal gaspitten:	2 zone(s)
Aantal elektronische kook zones:	0 zone(s)
Reguliere brander/kookzone diameter:	100 mm
Controle positie:	Voorkant
Aangesloten lading (elektrisch):	- W
Aangesloten lading (gas):	- W
Frame type:	Frameloos
Wokbrander:	Nee